Do you know what motor he used and where I could get one a bit larger like it? I'm gonna try to make this for a rowboat. I would like to get some good speed as well and any suggestions on motor size would be a huge help. I want to get good speed maybe 9-10 nots if possible. I don't know how to find the propeller either. Is this design going to last? what should I be watching to keep it in top condition? Any information would be much appreciated!! (:
Im going to make a very important suggestion. Use PVC glue, not that stuff you were using. Silicon sealant is needed as well. And while I'm at it, definitely a bigger prop
Actual pvc glue holds better than simple weather strip adhesive. BUT the problem using pvc glue is this--- what happens if you're out and need to make repairs? With weather strip adhesive you can pull it apart.
Yeah I would not be very efficient prop too small motor too small be okay for Putting around a small pond maybe let's just say I wouldn't lose sight of the dock
Looks like it worked. Not sure if it's water proof enough, but if you keep it turned upside down when not in use to let any accumulated water drain out, it should be ok. My minn kota 40# leaked for years(damaged shaft keep eating seals) before corrosion finally killed it.
Maybe try using some rubber cement glue to glue the rubber seal to the motor and put grease inside the rubber piece so it stays still while the shaft spins freely
That’s very creative on a budget type of rig. What size is that dc motor by the way? After this video I did look up on dc motors and I see they have other motors that are much more powerful in terms of torque and rpm. You should upgrade your version by putting quad motors not just that but a more powerful motor with a custom made 5 blade aluminum propeller. Have it into the water 6 to 8 inches down in the water. Swap the battery out to 24v. If u want to be more creative use solar charge and see if you can get that inflable to plane over 15miles per hour all electric. Super light and powerful.
Thewater seal probably wont keep water out but thats okay because keep in mind people intentionally run these motors under water to break them in for use in an rc car. Great video!
I dont mean to be off topic but does any of you know a tool to get back into an instagram account? I stupidly forgot my password. I appreciate any tricks you can give me!
Amazing video. Works great. But i do have 1 question and its just from pure curiosity. Why, in videos like this i see, do people not cut their pinky nails. Is this a religous thing.
Verdammt coole Lösung und noch dazu fast Umsonst die Röhre mit Kleber & Bögen Kosten nicht mal 10€... der Motor und die Batterie natürlich je nach Leistung. Werd mir so ein Ding für mein BellyBoat bauen, allerdings 2 strahlig und mit Metall Schrauben. Das Plastik Ding überlebt bestimmt kein Tag, ein mal Grundkontakt dann war's das. Gerade für BellyBoate eine Spitzen Lösung weil man die Halterung angleichen kann wie man sie braucht und es das Ding kaum Gewicht hat!!! Gruß Marco
It worked way better than I would have thought, trolling motors aren't made for speed, the only thing I would have done is make it have a reverse which is super easy with a DC motor, just simply have a switch to reverse the polarity
awesome, beats the paddle, but its the same as any electric motor, 20 mins dead battery, break out the paddle, im building one with weed eater motor so gas last as long as i want to go with out paddle.
brushed motor wont last long time, but like the simple build! If you want it to work, keep it simple, great engineer once said. water seal on motor shaft holding up well? computer fan blowing positive pressure into the pvc pipe may keep the water out?
greta idea. i would use a brushles in runner motor that does not care if it gets wet. a firmer prop with metal spindle and a lipo battery of 5000 mah at 11.1 volts.
I would like to know if I made a boat like the one you did with 12v engine if I put a brushless motor 1000kv battery 4s it will work or I should make changes
You guys need to scale that engine up. Maybe consider using a common starter off a small engine and bigger pvc pipe for the housing. Defintely beats a grand for a kayak engine though
Y cuanto te va a durar la gomita que has puesto como sello de agua en la hélice, ahí tienes que colocar un sello de bomba, es algo parecido pero te va a durar varios años....Saludos
this motor wont last long in water because you sealed motor air circulation, so when motor get hot there is no air circulation to make it cooler and it will het up and burnt down!
According to channels like this, if I just own a hot glue gun, I can send astronauts to space....
LOL...you are funny
Pretty much
The now politically incorrect a team used to do it🤣
If you own imagination! Skip games, social media and the couch!
I give it 5 STARS for simplicity and ingenuity.....
I would use a larger motor, prop, and battery......
Great video
Do you know what motor he used and where I could get one a bit larger like it?
I'm gonna try to make this for a rowboat. I would like to get some good speed as well and any suggestions on motor size would be a huge help. I want to get good speed maybe 9-10 nots if possible. I don't know how to find the propeller either. Is this design going to last? what should I be watching to keep it in top condition?
Any information would be much appreciated!! (:
not bad considering its made out of cheap materials the speed is great I rate it 10/10
you inspired me to made similar for my kayak! I'll use flexi shaft and motor will keep out of water! but idea is brilliant!
Im going to make a very important suggestion. Use PVC glue, not that stuff you were using. Silicon sealant is needed as well. And while I'm at it, definitely a bigger prop
Make one your self dip shit
ㅇㅅㅁㄹㄹ
Actual pvc glue holds better than simple weather strip adhesive. BUT the problem using pvc glue is this--- what happens if you're out and need to make repairs? With weather strip adhesive you can pull it apart.
Guy H. rB6
Yeah I would not be very efficient prop too small motor too small be okay for Putting around a small pond maybe let's just say I wouldn't lose sight of the dock
Enjoyable to watch your video
Hi, nice work! where did you get the rubber shaft sealing?
Nice work
Chạy 1 thời gian có bị vô nước ko vậy bạn.
Looks like it worked. Not sure if it's water proof enough, but if you keep it turned upside down when not in use to let any accumulated water drain out, it should be ok. My minn kota 40# leaked for years(damaged shaft keep eating seals) before corrosion finally killed it.
Looks good in theory, but the shaft seal wont last long.
I will say about 10 minutes, before the water sneak in...
Maybe try using some rubber cement glue to glue the rubber seal to the motor and put grease inside the rubber piece so it stays still while the shaft spins freely
Is it really waterproof?
This is the best thing I've seen in a long time 🤗👍
B cho m hỏi mua cao su chống ngấm nước ở shop nào vậy. Cám ơn B!
Parabéns amigo inventor,vc certamente seria um bom motivo para ser estudado pela NASA!
Super like!!
Tu sabes escribir😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😧😩😩😩
That’s very creative on a budget type of rig. What size is that dc motor by the way? After this video I did look up on dc motors and I see they have other motors that are much more powerful in terms of torque and rpm. You should upgrade your version by putting quad motors not just that but a more powerful motor with a custom made 5 blade aluminum propeller. Have it into the water 6 to 8 inches down in the water. Swap the battery out to 24v. If u want to be more creative use solar charge and see if you can get that inflable to plane over 15miles per hour all electric. Super light and powerful.
Fine design of boat and motor for calm days. You win the prize for lowest cost motor.
Thewater seal probably wont keep water out but thats okay because keep in mind people intentionally run these motors under water to break them in for use in an rc car. Great video!
Nice video and good idea
Oh, this is brilliant
I dont mean to be off topic but does any of you know a tool to get back into an instagram account?
I stupidly forgot my password. I appreciate any tricks you can give me!
@Forest Andres Instablaster ;)
Looks like a wading pool with a toy motor,but a great idea!
I think its better to immerse the motor with oil so no water can get in. It can also provide cooling property to motor without short circuit
..marine grease
good creative cool greetings success
Amazing video. Works great. But i do have 1 question and its just from pure curiosity. Why, in videos like this i see, do people not cut their pinky nails. Is this a religous thing.
Verdammt coole Lösung und noch dazu fast Umsonst die Röhre mit Kleber & Bögen Kosten nicht mal 10€... der Motor und die Batterie natürlich je nach Leistung.
Werd mir so ein Ding für mein BellyBoat bauen, allerdings 2 strahlig und mit Metall Schrauben. Das Plastik Ding überlebt bestimmt kein Tag, ein mal Grundkontakt dann war's das.
Gerade für BellyBoate eine Spitzen Lösung weil man die Halterung angleichen kann wie man sie braucht und es das Ding kaum Gewicht hat!!! Gruß Marco
Ya promoción q bueno haces😁😃😁🤠☺️🐕🐆
Hola
Cool..!! A home made trolling motor.
I also subscribe and like your video
How did the rubber seal work out? It looks like a design weakness to me.
The video is very good. Can you give me more specifications of the engine used !? Thank you!
IT WAS A 775 DC MOTOR.
Hello boss, i love this video but No parts list ? Thanks
A parts list sure would have been nice but still brilliant
bạn người vn hả. nó kín nước ko bạn. sợ chạy thời gian cái nó vào nước quá bạn ơi.
Very ingenious. Works pretty good
Nice video but where you get that rubber piece from? The one that goes over the motor shaft( spindle)
Мотор должен охлаждаться, а то сгорит за час))) За изобретения+55 Лайк!!!
Уплотнительная резинка на вале будет пропускать воду.
Cool this is what i need to make my movie
Great you made it and you sailed also that what i liked.
Thanks for sharing
Es dinero tirado, en cuanto se gaste (10 minutos) la goma que puso como sello de agua, le va agua al ruleman y al motor y adios....
Very awesome love the idea s
What's with the coke pinky? If you use threaded fittings you could do repairs/replacements wihtout having to rebuild the whole thing.
It worked way better than I would have thought, trolling motors aren't made for speed, the only thing I would have done is make it have a reverse which is super easy with a DC motor, just simply have a switch to reverse the polarity
Nice but.... Water will get in the motor very fast...
awesome, beats the paddle, but its the same as any electric motor, 20 mins dead battery, break out the paddle, im building one with weed eater motor so gas last as long as i want to go with out paddle.
Good work ! But very slow. Maybe it's
low voltage?
cool vid but the motor wont last you covered the cooling holes and thermally sealed the motor
Chạy bao lâu thì hỏng vậy bạn
beats the hell out of rowing all day! good job
Hi... that look easy and possible to anyone , top👌
thanks for sharing
Great DIY
Great idea ! What motor is this?
Good Job
No lube on the seal, it will leak, but before that the motor will overheat with rated load.
brushed motor wont last long time, but like the simple build! If you want it to work, keep it simple, great engineer once said. water seal on motor shaft holding up well? computer fan blowing positive pressure into the pvc pipe may keep the water out?
A brushless motor would be better I have a few of them and they actually run faster than the ones with brushes.
what you need to consider is the cavitation rpm for your propeller . faster may not be better @@mysticwolf2842
Thanks i will like your vid
whats the referenceof motor? its great! and batery what you use?
where i can find this watter seal? or something similar? thx
Freakin' genius. Love this video. Way to go man.
can you share the link for the small rubber bushing. thanks.. its hard to find in the market.
what do you call that rubber thing? the black one.
greta idea. i would use a brushles in runner motor that does not care if it gets wet. a firmer prop with metal spindle and a lipo battery of 5000 mah at 11.1 volts.
Nice Work
good job on the motor, but I'd like to see more about the boat!
Kalau pakai aki sepeda motor bisa tahan sampai berapa lama bang?
How will that brush motor cool?
super
I would like to know if I made a boat like the one you did with 12v engine if I put a brushless motor 1000kv battery 4s it will work or I should make changes
you can add a solar panel so that you can have a roof also to protect you from heat while fishing
You guys need to scale that engine up. Maybe consider using a common starter off a small engine and bigger pvc pipe for the housing.
Defintely beats a grand for a kayak engine though
It's for lite pontoon, kayak. Bigger needs bigger battery, stronger support, etc. But free to improve!
Y cuanto te va a durar la gomita que has puesto como sello de agua en la hélice, ahí tienes que colocar un sello de bomba, es algo parecido pero te va a durar varios años....Saludos
Bagus sekali ide nya
Hi, can you advise the model of the propeller that you use?
What is the rubber piece used as a shaft seal?
No i tak pływa na tej łupince 😀
this motor wont last long in water because you sealed motor air circulation, so when motor get hot there is no air circulation to make it cooler and it will het up and burnt down!
Lol nice coke nail on left pinkie finger ✌🏼
excelent, you made a best word with this idea.
How about a list of materials and specs....
Nice !! Like !!
Italo Lima gaand videi
Nice
Can the propeller be bigger?
Very low tech, but efficient. At least you can use the paddle for backup just in case. Not bad.
Very good
Very good, thank you
Nice I would put some grease in the rubber seal. Can you provide the seal and coupler source- thanks
Top parabéns!
Very good.
A ten pazur to do dłubania w nosie...? Czy gdzie?
Which motor did u use? How many rpm it has? Thank you
Good idea
From where did u get the rubber oil seal for the motor?
this is very possible, can you list the items used please...and where i can get them...
cut the bottom off a 20oz pop bottle and glue to the front end on bottom by motor may help cut thru the water a lil better with it coming to a point
And what kind of motor do you use? Drop the name.
this is 775 motor, Thank you!
@@nda Ok
Where can we buy the rubber and connector to propeller??
It is certainly better than rowing
I am afraid. Dat rubber water seal which you used in the front is not going to hold.....
That was what I spotted. Can't be spinning a rubber gasket and expect it to stay waterproof for very long.
It's under slight pressure to keep it sealed and it will be lubricated and cooled by the water so it could last quite a long time.
+Harry
не продержится и минуты.
Это если не обращать внимания на то, что корпус двигателя установлен в пластиковую крышку не герметично.
вода опасна для меди?
what sealant do you recommend? i just need it for a project, thanks
nice idea
How much volt battery are you taken plzzzz replayyyy
excellent - where did propellor come from?
A fan
outstanding idea
Salve dove posso acquistare la guarnizione in gomma per l'albero motore?