Just had an airtec decat fitted into my Dreamscience turbo back and it meant exhaust had to be adjusted to stop it knocking. I think mixing and matching different brands of exhaust bits is not the best way to go. Maybe should have.used a Dreamscience decat instead but I was impatient haha
Normally they do fit; with a little tweak. However this one had no adjustment, unlike the big name brands. Although the quality wasn’t horrific it was just designed to fit a standard ST setup we think.
Jason Dexter I wasn’t referring to the Airtec as cheap stuff or inferior. It was the CAT Back that was the issue in terms of fitment. The Airtec parts will fit easily with any of the well known brands 🔥
Great vid as usual. Yes bolts can be tricky little beggars especially the ones you cannot get to easily! It's one of the ten commandments of mechanics. 'And lo, thy predecessor hath used a shitty socket, nay a wanky 2 quid spanner and he hath rounded the head off so that even with ye mighty six point impact socket from Snapon thou cannot geteth any purchase.' There will be a gnashing of teeth, and there will be great anger. The cursed words shall be spoken.' amen.😂😂😂
Chris Baxter there are some great options from Mongoose, KMS and Milltek. Those are the brand leaders in my opinion... But that’s just our opinion - make your own choice 🙌
Unfortunately the u-clamps came with the kit - to supply Mikalor probably would have added most of the cost of the exhaust on top :/ We do work on the S-Max and we've seen modified exhausts fit - from memory we think it was an RS System used but may be wrong. Thank you for the feedback.
Abandoned Seekers unfortunately we see more and more cars with a slight ‘orange’ tint to the underbody these days. It’s a shame as the Mk3 goes the same way too 🤷🏼♂️
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Just had an airtec decat fitted into my Dreamscience turbo back and it meant exhaust had to be adjusted to stop it knocking. I think mixing and matching different brands of exhaust bits is not the best way to go.
Maybe should have.used a Dreamscience decat instead but I was impatient haha
Normally they do fit; with a little tweak. However this one had no adjustment, unlike the big name brands.
Although the quality wasn’t horrific it was just designed to fit a standard ST setup we think.
I now own this, lovely to see all the rust 😂
Another great informative addition with very wise words 👍
Thanks buddy 🙌
There is your intro for all your videos pal lol, great video 👊
Simon Lowe thank you 🙏
Ohh. Loving this video. Looks like I've got to purchase one now 😂
Jason Dexter an AIRTEC Combo or an EBay exhaust? 🤷🏼♂️
@@BDPerformanceWrexham definitely airtec. I'd stay a million miles away from ebay rubbish. Your asking for trouble otherwise.
Jason Dexter I wasn’t referring to the Airtec as cheap stuff or inferior. It was the CAT Back that was the issue in terms of fitment.
The Airtec parts will fit easily with any of the well known brands 🔥
@@BDPerformanceWrexham oh I didn't mean that you said airtec was bad. I'm taking about the cheap bolt on bits that you get from ebay
Great vid as usual. Yes bolts can be tricky little beggars especially the ones you cannot get to easily! It's one of the ten commandments of mechanics. 'And lo, thy predecessor hath used a shitty socket, nay a wanky 2 quid spanner and he hath rounded the head off so that even with ye mighty six point impact socket from Snapon thou cannot geteth any purchase.' There will be a gnashing of teeth, and there will be great anger. The cursed words shall be spoken.' amen.😂😂😂
Roy Evans wonderful poetry; thanks for the comment and the support 💙
Will stick with my single exit EBay special 😂😂😂😂
In your professional opinion which is the best quality exhaust for the Mk2 ST Downpipe & cat back I will in time purchase and get you to fit
Chris Baxter there are some great options from Mongoose, KMS and Milltek. Those are the brand leaders in my opinion... But that’s just our opinion - make your own choice 🙌
Can ST use RS exhaust system ?
My exhaust sounds loud enough, can I just change the tips to bigger ones
Oh no that rear clamp.....
Mikalor all the way.
Hey, will a focus system fit a smax 2.5 and do you do much work on those?
Unfortunately the u-clamps came with the kit - to supply Mikalor probably would have added most of the cost of the exhaust on top :/
We do work on the S-Max and we've seen modified exhausts fit - from memory we think it was an RS System used but may be wrong.
Thank you for the feedback.
I miss my old section 18 sounded amazing
Go all ASBO on the ST180 :D
BD Performance it’s sooooo tempting 😂😂
🔥
Top video as always boys
People always want to do things on the cheap . By Cheap buy Twice
waste of everyones time 🤬
Not everyone, but very many. During these exceptional times we cannot blame them though.
Stay safe and thank you for the comment 🙌
cheap can work fine if its rightly implemented , not everything to work well has to be top shelf parts .
Should of made the customer aware that direnza are pony lol
Wilkkid1 it turned out that it wasn’t a Direnza; it was actually another brand from eBay
BD Performance oh fair play sounded good tho 👌keep up the good content guys
Wilkkid1 thank you 💙
A st more rusty than mine lol 😂
Abandoned Seekers unfortunately we see more and more cars with a slight ‘orange’ tint to the underbody these days. It’s a shame as the Mk3 goes the same way too 🤷🏼♂️
orange tint is a very nice way to say the exhaust will definitely outlive that St
Buy cheap buy twice