Sorry to hear about the bad trouble! Couple questions to narrow down the problem: 1. When the gear shifter is in the drive position, what are the red lights next to the D on the shifter doing? 2. Still in drive, what is the gear indication on the dash showing? 3. When moving through the different gears, does the dash show the correct gears? 4. You never have the M or S lights show on the dash, right? Do the lights show up briefly when the ignition turned on? 5. Try disconnecting the battery for a day and re-connecting. Should help to reset the TCU if you do not have a scantool such as a nanocom. Let me know how you go.
Thanks for responding and sorry for the late responding anyway everything shows right on the shifter and the dash and yes m and s shows when ignition on for a little bit and I left the battery disconnected for 4 days even replaced the battery and nothing if you have a clue please let me know thank you very much
Sorry to hear about the bad trouble!
Couple questions to narrow down the problem:
1. When the gear shifter is in the drive position, what are the red lights next to the D on the shifter doing?
2. Still in drive, what is the gear indication on the dash showing?
3. When moving through the different gears, does the dash show the correct gears?
4. You never have the M or S lights show on the dash, right? Do the lights show up briefly when the ignition turned on?
5. Try disconnecting the battery for a day and re-connecting. Should help to reset the TCU if you do not have a scantool such as a nanocom.
Let me know how you go.
Thanks for responding and sorry for the late responding anyway everything shows right on the shifter and the dash and yes m and s shows when ignition on for a little bit and I left the battery disconnected for 4 days even replaced the battery and nothing if you have a clue please let me know thank you very much
And have the CEN TECH OBDll/EOBD but doesn't show me anything about the issue maybe I need a better one
Actually do I need to disconnect positive and negative or is okay like i did it. I only
disconnected the positive