Non-standard setup, but can you use the 4200-DL for some tones AND physical manual switches at the same time? Client has the 4200-DL "hidden" in the center console, but wants ability to have a switch that can be used for some tones without opening the console.
I am not sure which wire you are referring to so I have attached a copy of the instruction manual to this email www.feniex.com/uploads/products/media/manual_14_1.pdf
If you have a switch installed on tone 1 activated do you have to turn it off prior to activating the switch to tone 2 or does the switch to tone 2 override tone 1
An activated tone with a higher input number overrides an activated tone with a lower input number. For example, if Tone 4 and Tone 3 are both activated,the siren will play Tone 4
Why are there 2 ports for a single speaker on the 100w model? Does the speaker wire need to be spliced and put into both ports or does one of the ports useless?
So, if I pair the 200w storm pro with the 4200, I can just program the 4200 and use the rj45 with data link and I wont have to wire all the different tone ports?
Is 14gauge wire safe to wire the storm pro with a 15amp fuse or should I go with a lesser gauge wire to run on a 15amp fuse with power and the triton speaker ?
Hi, i have installed the Stormpro 200W and 2 x Triton. But there is a delay. Whenever i press any tone, there is a 0.5 second delay. Any idea why its happening?
Sorry I am not too sure why that is happening.Please give Feniex Tech Support a call and they will be able to get this figured out for you! 1-800-615-8350
Need help, i have a motorola radius m1225 and i have a 12 pin to fit in the back of the radio to headphone jack adapter, i cut a old pair of headphones and hooked the wire where it says radio on and pluged the other end using the headphone jack and nothing, am i missing something on how to get it going?
Did you run power wires to the siren as well? If you are still having issues please contact Feniex Technical Support and they will be able to assist you with wiring questions! 1-800-615-8350
Yes the Storm Sirens will stay on the selected tone after it is turned off if you are using a controller.If you are not using a controller then the siren will cycle back through the tones
This is useless info. All he does is tell you, you can hook these up. NO real info on HOW to hook these up. Such as which ports to use. I really need more info. Gonna have to call Fenix.
Sorry about that. This video was made over 5 years ago. If you need more installation information Feniex Tech Support will be able to assist you: 1-800-615-8350
Non-standard setup, but can you use the 4200-DL for some tones AND physical manual switches at the same time? Client has the 4200-DL "hidden" in the center console, but wants ability to have a switch that can be used for some tones without opening the console.
Yes you can wire it up that way!
What is the jumper wire connected to? The + or - terminal?
I am not sure which wire you are referring to so I have attached a copy of the instruction manual to this email www.feniex.com/uploads/products/media/manual_14_1.pdf
If using a 4200DL, Besides the positive and negative, all i need is the RJ45 ? Dont have to run wires from the output of the 4200 to the storm?
That is correct. The Storm 100W will connect to the 4200DL using the RJ45 Cable
If you have a switch installed on tone 1 activated do you have to turn it off prior to activating the switch to tone 2 or does the switch to tone 2 override tone 1
An activated tone with a higher input
number overrides an activated tone with a lower input number.
For example, if Tone 4 and Tone 3 are both activated,the siren will play Tone 4
W appears to be working on tech that projects messages onto the road..
Very interesting!
Can we get a demo on tone delay
That's a great idea! We'll get it in the pipeline
What is the ideal location to place the storm pro on an explorer police model
Usually under the passenger seat or back seat!
Why are there 2 ports for a single speaker on the 100w model? Does the speaker wire need to be spliced and put into both ports or does one of the ports useless?
The speaker should have two wires coming out of it.One for each port
So, if I pair the 200w storm pro with the 4200, I can just program the 4200 and use the rj45 with data link and I wont have to wire all the different tone ports?
That's correct! You will just have to select which tones you want when programming the 4200!
Is 14gauge wire safe to wire the storm pro with a 15amp fuse or should I go with a lesser gauge wire to run on a 15amp fuse with power and the triton speaker ?
14 gauge wire with the fuse will be fine!
@@UltraBrightLightz awesome thanks !
@@roxfire23 You're welcome!
serious question if i run power to park kill port while connected to an rj45 to a 4200 controller this will still kill the siren tone correct?
Yes that is correct!
Would I be able to connect it to a handheld controller
The Feniex Sirens are compatible with handheld controllers
Can I use an aux cable from cellphone to play tones?
Sorry you are not able to do that
What are the specs of the smaller speaker used for the demo?
Sorry I am not too sure.We no longer have it
How do I connect my radio to play music to the speaker ?
How do you raise volume on the storm pro 200
Sorry the Feniex Storm Pro Siren does not have a volume control.The Feniex Typhoon Sirens do though
Hi, i have installed the Stormpro 200W and 2 x Triton. But there is a delay. Whenever i press any tone, there is a 0.5 second delay. Any idea why its happening?
Sorry I am not too sure why that is happening.Please give Feniex Tech Support a call and they will be able to get this figured out for you! 1-800-615-8350
@@UltraBrightLightz i dont live in USA. Nevermind i upgraded to Whelen HHS3200 and its perfect. Thanks for the attention though.
@@danbodroid You're welcome!
Can you just hook it to a basic on off switch?
You would need to wire up and on/off switch to each tone that you would like to use
@@creativeguy1138 You're welcome!
@@UltraBrightLightz Another question, is it possible to just power this by hooking it to a cigarette plug?
@@creativeguy1138 Sorry it needs to be hardwired
How do you set the “air horn” tone
You need to change the tones by pushing the button that is on the side of the amplifier until it gets to the horn tone which is tone number 10
@@UltraBrightLightz thanks
@@roxfire23 You're welcome!
Need help, i have a motorola radius m1225 and i have a 12 pin to fit in the back of the radio to headphone jack adapter, i cut a old pair of headphones and hooked the wire where it says radio on and pluged the other end using the headphone jack and nothing, am i missing something on how to get it going?
Did you run power wires to the siren as well? If you are still having issues please contact Feniex Technical Support and they will be able to assist you with wiring questions! 1-800-615-8350
@@UltraBrightLightz ok thank you for your info
@@raydumont7628 You're welcome!
Where on the Storm Pro do the Triton’s blue and brown wires go since the Triton doesn’t have a - or +?
On the siren there are two spots that say 100w speaker.You can put either wire in either spot
So I have a question... Does it remember what tone you've selected after it's powered off, or does it need constant power?
Yes the Storm Sirens will stay on the selected tone after it is turned off if you are using a controller.If you are not using a controller then the siren will cycle back through the tones
@@UltraBrightLightz Thanks... I certainly hope you're right, because I don't want to end up committing a felony by accident.
This is useless info. All he does is tell you, you can hook these up. NO real info on HOW to hook these up. Such as which ports to use. I really need more info. Gonna have to call Fenix.
Sorry about that. This video was made over 5 years ago. If you need more installation information Feniex Tech Support will be able to assist you: 1-800-615-8350