ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- Hey everyone, I hope you enjoyed this, yes my brother is happy with the build! And with that, I'm going to take a break from keyboard content for a while, I'm moving to a new home, with enough space for a new studio :D
I am also thinking of doing other desk gear too. but I'll brainstorm it another time.
But I need to save some freedom eagles for furniture and renovation, I'll also be busy packing stuff up, it's going to take a while. But I'll be back with more.
Happy holidays everyone!
Links|
Royal Kludge RK61: tinyurl.com/yc...
Japanese BOW with Red Japanese Kana: tinyurl.com/2d...
KTT Matcha Tactice Switches: tinyurl.com/5c...
Poron Plate Foam: tinyurl.com/3p...
Butyl Sound Proofing Sheet: tinyurl.com/mr...
Micro O-Rings (Box Set): tinyurl.com/yc...
Lube, Kryotox 205g0: tinyurl.com/57...
Silicone Dielectric Grease: tinyurl.com/26...
Soldering Paste: tinyurl.com/ys...
Desoldering Iron: tinyurl.com/mp...
Industrial Heat Gun: tinyurl.com/24...
Music|
Subtle Break by Ghostrifter Official | / ghostrifter-official
Music promoted by www.chosic.com...
Creative Commons CC BY-SA 3.0
creativecommon...
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
![[FULL EP.73] เปิดบ้าน 70 ล้าน "แป้ง Zbing" ยกมาทั้งญี่ปุ่น l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/YBnJhTt07Pg/mqdefault.jpg)
honestly one of the best keyboards ive ever heard : )
arigato :D
Sounds awesome! Especially for switches without lube!
Thank you~ :D i may not have mentioned but the switches are lubed XD sorry~
Why are custom keyboard youtubers so underated bruh. 52 subs only too
actually im only doing this to practice speech and presentation XD
still just a hobby at the end of the day haha
That sounds awesome!! I'm also moving into a new house soon, I might wait til then to get into building a keyboard. I'm thinking of starting with this one.
If you're building, good luck and have fun :D
Great video ❤
Thank you~
Underrated new sub!
Thank you! =D though its going to be a while before i do another vid T_T keyboards are expenshiv..
What cable is that it looks so good
its actually a cheap knock off from AliExpress mate XD and its the RX-78-2 theme
nice😀. what was the budget for the entire build
haha not much really, the build (not including the keyboard, since the keyboard costs around U$D25 or if you're from MY it's RM108)
1. The Switches 61 pcs U$D25 (or MYR103.7)
2. Keycaps U$D15.20 (or MYR67),
3. Car Decal StickerU$D3 (or MYR13)
4. Plate foam U$D5.20 (or MYR22.90)
5. Sound Proofing Foam = U$D4.60 (or MYR20)
Alltogether= U$D 51.21 (MYR226.60)
hope this helps :D
thanks for posting, i'm waiting for parts to come in and these videos are keeping me fed until then. but I thought the RK boards were hot swappable?
There is another variant which is this one, the very entry level RK61 non-hot-swappable-non-RGB-white-backlit-only variant. They're not really in demand because of the soldered switches, and not very entry level friendly for those who just want to start the hobby. (its better to start out with a hot-swap board than something like this imo). Sounds like you got something cool, what are you building anyways? - spill!!!
@@cmdrnick aw thanks so much for responding! I just got an rk100 for work (need that numpad) and I’m attempting to mod it to be as quiet as I can for the office. trying gamakay silent switches.
@@emotionalinertia ah that's cool, if you could, get those poron switch pads too, helps dampen those switches. I got my dad the RK100 (white backlit) for christmas to replace his old HP 330. That RK is a hefty board, i filled it up with some foam (random foams all mixed up) makes the sound more compressed. They came with Browns, tactile, overlubed the stems to make it more linear so the old mand doesnt complain about the loudness. haha. Happy building mate! :D
like ur vids bro
Thanks, that means a lot =]
I like it, hows the tactility of this switches??
very lite, they're not heavy like panda's, almost natural, I mean for my fingers at least. They're slightly heavier than browns, but not squishy like browns, these are very tactile, bumps are short and sharp, but not rough, instead smooth like linears. Not much of wiggle either, barely noticeable. Though the majority prefers the roughness of pandas, I do too, which is why I have another build with pandas, lubed and filmed. But it's a different character altogether if you compare them both. One is heavy and percussively louder makes you angry in a good way (Pandas), and one just makes you want to keep writing a book explaining your confessions to your crush while listening to lofi Sekiro music (Matchas) XD
please, PLEASE SPRAY PAIBT THE WHITE BACKPLATE
Dang its RGB without the RG..
End product somewhat turned into mint toothpaste now that I noticed...
I have the RGB version.
It doesn't have that extra screw, and it's hot swap.
Is it different from this one? The case mountings, screw layouts, etc? I never got a good look at the RGB one.
@@cmdrnickmost of the new ones look like they are somewhat pre modded they have no extra screw slots that looks like they have been chopped off by hand
@@oHyponz yea they are, this is probably the first or second gen RKs, in fact newer KBs from most manufacturers have somewhat changed the design to accomodate easy mods. It's a lot cheaper now too, no more big holes in pockets! But it's all individual preferences, i prefer to .... "fix" things... lol
i have the question about the soldering, does it happens to us if we do something wrong? or is the rk 61 in a bad condition?
Hello the RK61 was not in terrible condition at first, it just required some cleaning, however for soldering, you just need to make sure that the solder lead makes contact with the switch pins and the switch dock on the PCB of the board. When soldering you also want to make sure the iron does not touch the other components on the PCB, that kind of mistake may render the board useless. Only solder the pins of the switches (only 2 pins each switch). If you are new to soldering, I suggest you check out some videos on how to solder PCB. if you're still not up for the challenge, there are always options to build a custom keyboard with hot-swap PCB (PCB that does not require solder as you can attach and detach switches freely). The RK61 also comes with a hot-swap version, it's just that the version of RK61 I have here is the non-hot-swap version. the very entry-level RK61, non-RGB (just white back-lit).
@@cmdrnick so if rk61 was not in a good condition, wdym by some cleaning? did something go wrong when u mod or something else?
@@기몽-o4g Okay, so for this board (the one in my video) the condition was dirty, plenty of dust and debris. when I was soldering this board with the new switches, some of the switches were not working, because the solder was not enough, i had to cover the whole pin to make sure that the solder was making contact the board and the switch pins. it was a simple fix: start the soldering iron, heat up the solder on the switch pins a bit more until the solder covers the pin and makes contact with the board. then it worked.No major issues (mechanically anyways) with the PCB.
>>>>>>>>>>>>>>>>>>>>>>>
Worse case scenario, if your RK61 is in bad condition, first check if the PCB is working using a key tester, I use VIA, because it's my fav: usevia.app/#/
remove all the switches, use a tweezer, test each pair of pin holes on the PCB, if all 61 pair of pin holes register, then the issue is with the switch(es). if the PCB does not register from a (or a few) pair of pin holes, then PCB is potentially gone.
if the PCB is okay, then there is hope to restore, just need new switches, a nice set of keycaps and the case, well, depending on how bad it is, might have to custom order a case, because it's really hard to find a custom case for an RK61.
@@cmdrnick thx bro i respect u
@@기몽-o4g no worries man :) any time.
House review?!?!
Maybe a setup tour? Becuz I aint pro when it comes to kitchen walls.. XD