Most straight forward walk through I've seen! Thanks for creating this, I was able to pair it in less than a minute. The ikea manual is just pictures that don't explain anything 😂
Thanks from Australia mate! The instructions that came with the remote and power supply were useless. I was considering returning the products until I found this video. Thank you so much!
Glad I could help. I actually returned a few remotes, thinking they were not working until I realized that the power supply in most cases must be reset to be ready for pairing.
Great video , very simple explanation and tutorial. Ikea’s info can be a bit misleading and or confusing. Set up was pain free after watching this Thanks
Thank you for the video. Could you help me with this question? If I have the TRADFRI 30W driver (which can connect 10 led strip units), and I want to connect 10 SKYDRAG led strip units of each 6W (60W total), wouldn't that exceed the maximum 30W of the driver? In which case I would have to connect 2 TRADFRI 30W drivers, correct?
@kitchensbyrannes Thank you :-) So if i understand you correctly, a connection wire between the two drivers isn't enough. Do you mean that i really need a seperate powersupply with powerplug for each driver?
Hi there, thank you for this video. I have one question with controlling two power supplies with one remote. From the video, I understand the power supplies must be close to one another, but how close? or rather, how far can they be for the remote to be able to control them. In my planning, they would be about 10 feet from one another. Would that work? Thanks in advance
Hello, thank you very much for the videos. I have a question; I use YTBERG in my wardrobe and Översidans indoors, but unfortunately when I try to turn off the YTBERG LED outside with the remote control, the Översidans in my indoor wardrobe also turns off. What is the way to separate these two? The only idea that comes to my mind is to use 2 LED drivers connected to each other, as I saw in this video. Do you think it's right?
You're welcome 🤗 Unfortunately, I'm not familiar with the products you mention as they aren't used in kitchens in Canada. I try to limit my videos to be about my own experience with Ikea products, and I have no knowledge or experience with those you mention. Try to ask Ikea customer support.
Is the red light on the remote supposed to turn of when it’s connected? Because it lights up and does its thing but the remote doesn’t work. I inserted a new battery
I'm not certain about the red light. Sometimes it takes two tries to make it work. Remember to only short-click on either ON or OFF. If you click too long, it's dimming...
Thank you so much! I have now managed to pair my remote with the driver and I can turn the lights on, off and dim them...hurrah. Ikea's instructions concerning are useless.
I'm not sure which Ansluta you have, but the only Ansluta we have in Canada is either a small power supply or a cable, and none of those can be wirelessly connected to any Ikea remote control.
Yes, physically it can, but you should not. If you cut off the plug at the end of the cable it will not be to code as the cable isn't approved to be hardwired.
@AidanSkoyles you're very welcome. Paying...? 🤔 Ikea pays me nothing. Instead, I encourage my viewers to support the channel. Some do, and most do not. C'est la vie.
Thank you very much for this, and all your IKEA videos! The timing of this post is perfect! This is the last thing I need to do after my sister and I have assembled and installed a 17 cabinet kitchen, mostly on our own. This was possible because of your instructional videos. They are THE best out there!! I will be heading to your channel to show my appreciation! Thank you for taking the time to create these for us DIYers! ❤
You must have experience with this, but is there a trick or setting to make MITTLED drawer lights turn on quicker when opening drawers? There seems to be an annoying delay due to the trigger distance.
comment dire en 1000000000 de mots ce qui aurait pu être dit en 100 ..... fais plus court mec !!! tu ennuis avec tes détails ...... on sait a quoi ressemble un câble d'alim ou us depuis notre enfance ..........
Thank god for this video! My wife is thrilled that the bag of lights is lonely taken care of!
You're welcome.
Happy wife, happy life 😊🙏
The most helpful, straightforward explanation. Better than any IKEA manual, that’s for sure!
Glad it was helpful! 🤠
Most straight forward walk through I've seen! Thanks for creating this, I was able to pair it in less than a minute. The ikea manual is just pictures that don't explain anything 😂
Thanks. I'm glad you find it helpful 😄
This video was very helpful. I could not pair the damn things until I watched. Thank you!
You're very welcome.
I'm glad you got connected 😁
You sir are god sent. The manual that comes with the remote was completely useless. Thank you
Glad I could help
We spent days trying to make sense of the manual, but your video made it perfectly clear. Thank you!
My pleasure 😊
The most straightforward and simple to follow instruction. Managed to set up the LED in my kitchen in less than 5 min. Thanks from Germany!
Glad it helped. Vielen Dank ☺️
perfect 🎉
Thanks 👍
Thanks from Australia mate! The instructions that came with the remote and power supply were useless. I was considering returning the products until I found this video. Thank you so much!
Glad I could help.
I actually returned a few remotes, thinking they were not working until I realized that the power supply in most cases must be reset to be ready for pairing.
Thanks so much! This was so much clearer then the instructions that came with it.
Glad it was helpful! 😀
Thankyouuu! Finally it worked!💪🏼
Yay....you did it 😁
Thank you for the video, the lamps in the kitchen finally work! 🎉🥳 Greetings from Hungary!
You're very welcome.
I'm glad you saw the light 😄
Thank you sir! Truly helpful. Made our whole family happy today :)
Glad I could help! ☺️
Brilliant! Thank you! Easy to follow and did the job!
You're welcome.
Do I need the power supply if I have the dirigira hub?
Yes, two different things.
Awesome, straightforward and most importantly- working. Very pleased and thankful to stumble upon this one.
Great to hear! 😊
Thanks for the great video; mystery why Ikea doesn't sell shorter cables though
Good question! ☺️
Great video , very simple explanation and tutorial. Ikea’s info can be a bit misleading and or confusing. Set up was pain free after watching this Thanks
Glad it was helpful! ☺️
Thanks a lot! I embarassed my husband doing what he couldn't do!! Greeatings from Poland 😊
Haha....epic 😁
You're welcome.
Thank you for the video. Could you help me with this question? If I have the TRADFRI 30W driver (which can connect 10 led strip units), and I want to connect 10 SKYDRAG led strip units of each 6W (60W total), wouldn't that exceed the maximum 30W of the driver? In which case I would have to connect 2 TRADFRI 30W drivers, correct?
Yes, you'll need two power supplies.
@kitchensbyrannes Thank you :-) So if i understand you correctly, a connection wire between the two drivers isn't enough. Do you mean that i really need a seperate powersupply with powerplug for each driver?
Driver = power supply.
Trådfri is the power supply/driver.
Yes, 2 x 30 W to handle all that light 😄
@@kitchensbyrannes thank you 😊😊😊
@@kitchensbyrannes thank you 😊😊😊
Hi there, thank you for this video. I have one question with controlling two power supplies with one remote. From the video, I understand the power supplies must be close to one another, but how close? or rather, how far can they be for the remote to be able to control them. In my planning, they would be about 10 feet from one another. Would that work? Thanks in advance
You're welcome.
I'm sorry for the confusion. The power supplies do not have to be close to each other, as long as they are in the same room.
You saved the day! Thanks!
Glad to hear it! 🙂
Thanks very helpful
You're very welcome 🤗
Your video is fantastic, and i plan to use it. But can you tell me what remote control to buy ?
Thanks 👍
www.ikea.com/ca/en/p/rodret-wireless-dimmer-power-switch-smart-white-80559800/
@@kitchensbyrannes works like a charm, I bought the remote and followed your instructions, only took 5 mins. Thanks again !
You're welcome.
Thank you so much sir !!! This video just helped us😊
Most welcome 😊
Hello, thank you very much for the videos. I have a question; I use YTBERG in my wardrobe and Översidans indoors, but unfortunately when I try to turn off the YTBERG LED outside with the remote control, the Översidans in my indoor wardrobe also turns off. What is the way to separate these two? The only idea that comes to my mind is to use 2 LED drivers connected to each other, as I saw in this video. Do you think it's right?
You're welcome 🤗
Unfortunately, I'm not familiar with the products you mention as they aren't used in kitchens in Canada.
I try to limit my videos to be about my own experience with Ikea products, and I have no knowledge or experience with those you mention.
Try to ask Ikea customer support.
Thank you from Canada
You're very welcome 🤗 from Canada 🇨🇦
It worked, thank you!
Glad it helped! 😄
Meilleur vidéo !!! Merci 🤭🤭🙏 ça m'a. Beaucoup aidé
Avec plaisir 😁
Thank you sir, you saved my day
You are most welcome 🤗
Excellent great post 👍
Thanks 👍
Thanks
You're very welcome 🤗
Thank you so much! IKEA remote control instruction doesn't explain anything at all 😅
You're very welcome 🤗
thanks, that helped!
A huge thanks!
Glad it helped! 🙂
Thanks a lot!
You're welcome!
thanks :)
Happy to help 🙂
Is the red light on the remote supposed to turn of when it’s connected? Because it lights up and does its thing but the remote doesn’t work. I inserted a new battery
I'm not certain about the red light. Sometimes it takes two tries to make it work.
Remember to only short-click on either ON or OFF. If you click too long, it's dimming...
Thank you so much! I have now managed to pair my remote with the driver and I can turn the lights on, off and dim them...hurrah. Ikea's instructions concerning are useless.
You're very welcome.
I’m trying to remotely turn the ANSLUTA product from IKEA on and off. Can it be connected to STYRBA?
I'm not sure which Ansluta you have, but the only Ansluta we have in Canada is either a small power supply or a cable, and none of those can be wirelessly connected to any Ikea remote control.
can these be hard wired?
Yes, physically it can, but you should not.
If you cut off the plug at the end of the cable it will not be to code as the cable isn't approved to be hardwired.
I tried to connect the remote, however i think my remote is broken. If you press the remote, do you see any lights? Thanks!
If the power supply has been reset, the red light on the remote will be on.
Fresh battery?
whatever ikea is paying you, they should be paying you more. thanks for the video.
@AidanSkoyles you're very welcome.
Paying...? 🤔 Ikea pays me nothing.
Instead, I encourage my viewers to support the channel. Some do, and most do not. C'est la vie.
Thank you very much for this, and all your IKEA videos! The timing of this post is perfect! This is the last thing I need to do after my sister and I have assembled and installed a 17 cabinet kitchen, mostly on our own. This was possible because of your instructional videos. They are THE best out there!! I will be heading to your channel to show my appreciation! Thank you for taking the time to create these for us DIYers! ❤
You're very welcome.
Almost there then 👍
You must have experience with this, but is there a trick or setting to make MITTLED drawer lights turn on quicker when opening drawers? There seems to be an annoying delay due to the trigger distance.
I've never noticed a delay 🤔
Are you sure that the sensors on the light are pointing towards the drawer front?
I would like to unpair it
Try resetting the power supply.
I still cant do it. What am i Doing wrong? One led Light inside rudsta Cabinet.
If the power supply is Trådfri, and the battery in the remote is good, try resetting the power supply again.
@kitchensbyrannes thanks I will Try again tomorrow. I dont like the pairing prosess. Really difficult. And not explained in manual. Why so hard?
@kitchensbyrannes yes I have trådfri and skydrag ledlist. Rodret remote.
Thanks for help, mate.
IKEA's manuals are useless. 😆
Tell me about it 😜
comment dire en 1000000000 de mots ce qui aurait pu être dit en 100 .....
fais plus court mec !!! tu ennuis avec tes détails ...... on sait a quoi ressemble un câble d'alim ou us depuis notre enfance ..........
I'm sorry that someone is forcing you to watch my videos. What an awful way to spend your Saturday!
Thanks, it helped! But a 6 minute video for 3 steps? 🙄 This could have been done in a 20 sec short.
Glad it helped! Some folks like to take their time, but for you, I made this.
th-cam.com/users/shorts4Jr7s3gXZt8?si=GDU3UGLm1ZqTU9Qx
Thank you!!
You're welcome!