I find it totally Amazing that the engineering of Caterpillar incorporated is so sophisticated as to allow this type of maintenance to be performed in the Dirt with essentially bent STICKS for tools. That it ever runs is a tribute to the engineering quality that went into it.
Amazing what they can do with the lime Ted tools and supplies it would take a fortune of sufisticated line of tools to do what they do with a screwdriver and a pair of pliers ! Great skills !
The wrong way to do things, the sleeves would have benefited from equal pressure at the same time using a single screw and two bars of metal to force them in more evenly. Rings shouldn't be applied to the pistons dry. Should pay attention to your o rings and never Force ANYTHING. I saw the torque wrench out once, everything on that diesel should have been torqued to spec, as well as loctited to ensure the bolts don't back out, and pipe dope on any bolts that go through water passages if any. Yes they could benefit from better tools, but i think proper training would benefit them more.
Бугеля коленвала и гайки гбц последним этапом протягивают соответствующим моментом(динамометрический ключ), обратите внимание те, кто ниже пишет про это
Похоже из-за Этого момента и не схватился двигатель! Хотя первая попытка была удачной! Но без соответствующей оснастки коренные и шатунные вкладыши долго не протянут! Увы!!!🙃🤣
I like these videos, BUT what these crews do is refurbish these engines. There is a world of difference between overhauling and rebuilding. This same project would cost BIG bucks at a CAT dealership where the mechanics are instructed to replace any component that doesn’t meet specifications. My guess is a complete rebuild of this engine at a CAT dealer would run more than $20,000 USD.
Putting the old slugs back in new liners?? Those slugs have already done so much work it’s false economy to reuse them, they’ll fail through the gudgeon pin and destroy the block at some point.
Hola disculpen la opinion pero las abrazaderas que sujetan las bielas y el cigueñal se deben apretar con torquimetro para que el apriete sea parejo disculpen y asta luego.
I didn't see them torque anything. All by feel I guess. Damn good work though for what they have to work with. Give them a modern shop and they'd probably run circles around a lot of the mechanics we have.
OF COURSE we’re a Caterpillar authorized remanufacturing facility! why would you even ask? these guys look like they know what they’re doing, but I doubt there’s a calibration certificate for that torque wrench…
These mechanics have problems ,they assemble the engine using irregular tightening sequence AND before the engine starts the mains bearings are already strained and such alters the engine oil pressure whats problem...desert mechanics😂😂😂😂😂❤❤❤❤ but kudoos at least they are using the torque wrench for standard strengths ....from centre..diaonally and horizontally,such is inevitablekkkmm
سلام ارادت- کار عالی بود لذت بردم ولی اینکه موقع جمع کردن موتور ۲۰ نفر دور موتور جمع میشوند و هر کدوم قسمتی رو دست میزنند ایا حواس و دقت عمل مکانیک یا اوستا رو بهم نمیزند از اینکه فلان قطعه یا پیچ خوب بسته شده یا در جای خود خوب فیت شده است یا هر ۲۰ نفر اوستا و مکانیک هستند ؟!! با تشکر از کلیپ خوبتون ❤
That's it for me Guys, come on , NOT EVEN A NEW OIL PUMP . So much work & NO NEW pump OR pistons . False economy. 100% you'll be fixing this engine again soon
Wayyyyyyyyyyyyyyyyyyyy too much sealer!!! You clowns need a large caulking gun of sealer & double gasket everything! lol No matter, it will be back within a month if not sooner, smoking it's lungs out & rattling!!
I live in Orange County California most young people are total lazy and bums and do drugs all day and steal from Walmart how can you say anything bad about these guys😂
You probably just didn't get that memo. Yeah, all industrial sized engine rebuilds are free now. /s You bozo, of course it's not free. There are thousands of US $$$ in parts alone.
I find it totally Amazing that the engineering of Caterpillar incorporated is so sophisticated as to allow this type of maintenance to be performed in the Dirt with essentially bent STICKS for tools. That it ever runs is a tribute to the engineering quality that went into it.
your reference by reference is showing. it is only symptomatic of your GrassHopper Schooling boy
Everyone knows they individual jobs absolutely fantastic to see a group of men rebuilding a cat engine to a very high standard ,
The Limbo Rock
You guys would be limbo stars
No benches in this shop
These guys are very good mechanics. I really enjoyed watching them rebuild this engine. Thank you for posting.
❤❤
Молодцы делают,как умеют,без всяких динамо ключей
ANYONE OF US CAN PERFORM THIS TYPE OF WORK NEVER LIMIT YOURSELFS TO WHAT YOU CAN AND CAN NOT DO GOD BLESS
@@Eboy_esp Thanks for watching 🙌
Amazing what they can do with the lime Ted tools and supplies it would take a fortune of sufisticated line of tools to do what they do with a screwdriver and a pair of pliers ! Great skills !
Great perfornance in the open air👍👍👍
The wrong way to do things, the sleeves would have benefited from equal pressure at the same time using a single screw and two bars of metal to force them in more evenly. Rings shouldn't be applied to the pistons dry. Should pay attention to your o rings and never Force ANYTHING. I saw the torque wrench out once, everything on that diesel should have been torqued to spec, as well as loctited to ensure the bolts don't back out, and pipe dope on any bolts that go through water passages if any.
Yes they could benefit from better tools, but i think proper training would benefit them more.
Why don't you go over there and tell them that to their faces if you got guts
@@James-ce6ic Whats the problem with constructive observations ? Are you scared to learn ?
They never throw anything away: an old belt for the hoist, even an old soda bottle for the oil.
The millennial’s could learn from this
Great workshop floor,dust, grit and dirt .
Молодцы мужики привет из России
Great work, congratulations, Rio de Janeiro brasil😂
Nice. Extremly relaxing to watch a long episode as this ! Perfect ! :-)
What mechanical geniuses!?!
Amazing!
My best compliments!
Reconditioning an old CAT turbo-diesel motor!
Alex.
Бугеля коленвала и гайки гбц последним этапом протягивают соответствующим моментом(динамометрический ключ), обратите внимание те, кто ниже пишет про это
Похоже из-за Этого момента и не схватился двигатель! Хотя первая попытка была удачной! Но без соответствующей оснастки коренные и шатунные вкладыши долго не протянут! Увы!!!🙃🤣
New cylindre must assembled with New piston
Very true 😂
much respect to this people.
Saludos desde ARGENTINA BAHIA BLANCA, buen trabajo 👍👍👍👍👍👍👍👍👍👍👍
Момент затяжки гаек измеряется в [индус-на-метр]
до искр из глаз
Схуяли? В начале видео бугеля затянуты Динамо ключем
Good job big boss 💪💪
I like these videos, BUT what these crews do is refurbish these engines. There is a world of difference between overhauling and rebuilding. This same project would cost BIG bucks at a CAT dealership where the mechanics are instructed to replace any component that doesn’t meet specifications. My guess is a complete rebuild of this engine at a CAT dealer would run more than $20,000 USD.
Plutôt 30 000 ou 40 000€ chez cat.
Bon travail les amis 🫵👍💪 mais attention aux pistons réutiliser 👋🇫🇷🇫🇷🇫🇷.
😂😂sz😢@@becassier410
No doubt these guys are brilliant 👏 👌 but what I don't like is dirty places. They don't care about clean and hygienic places for work.
Привет из России ! Успехов вам ребята !
Very good, greetings to you
Awesome team work on a tough job! I enjoy watching your videos 😎
ललजवल वव
Imagine getting work visas and bringing these guys to C&C equipment in Indiana at that huge shop with the bulldozers
these men are so professional at their work,they work so well together
Excellent work keep it up 👍 ❤
I am disabled I would love to have all these guys around me to work and help I have tons of tools and money the women cook and Feed Us
Pretty tough job.i love this types of job. Because I was doing same job
That’s a hell of a torque crunch
Like👍👍👍👍👍👍👍👍👍👍 nice video,,,,,
Good job torquing rod bolts to 190 footlbs total screw up
TOP TOP TOP 🇧🇷🇧🇷🇧🇷
Excellent workmanship. Well done. And very good video
Gostei do vídeo tbm! 🇧🇷
p
E top demais 🤝
Putting the old slugs back in new liners?? Those slugs have already done so much work it’s false economy to reuse them, they’ll fail through the gudgeon pin and destroy the block at some point.
Great team work
@@MichaelFazio-ys8ly Thanks for watching 🙌
OLÁ. É o legítimo motor "ecológico". Montado em terra forte. Agora é só adubar
The only thing that looked out of spec to me was the pistons lots of scuffs on the sidewalls and skirts
Damn I wouldn't trust that v-belt to lift that crankshaft!
I think i would be trying to find certified cat mechanics to fix it. I don't think warrantee would be a word they understand.
This was an old engine so I'm pretty sure the warranty expired some years ago.
@@laserbeam002he means warranty on the rebuilt engine
I did not see anyone inspecting the welchplugs😂😂😂😂❤❤❤
Great 🎉🎉🎉🎉🎉
Very nice❤❤
Hola disculpen la opinion pero las abrazaderas que sujetan las bielas y el cigueñal se deben apretar con torquimetro para que el apriete sea parejo disculpen y asta luego.
Делали делали но так и не запустили
بسیارعالی. ازایران
How many hours for a total tear down and rebuild plus parts and cost? Roughly? Thankyou 🇨🇦😄
Fantastic video!
I didn't see them torque anything. All by feel I guess. Damn good work though for what they have to work with. Give them a modern shop and they'd probably run circles around a lot of the mechanics we have.
do agree sir
They did torque the main bearings
I saw a lit cigarette next to both of the fuel filters being filled with fuel diesels very safe but still lower safety standards
При капиталке двигателя разве поршни ставят старые хоть и новыми кольцами ?
Тем более на вид поршни уж такие облдранные
👍👍👍👍👍
What did you put/appl on the head gasket?
A good way to ruin the piston ist to install the rings this way.
ESSE MOTOR PELA APARENCIA D342 CATERPILLAR EMINHA MOTOR APLICAÇÀO DIVERSSAS
Pretty cool they spend all day making that huge engine then ride a goat home.
every time they tighten a bolt im like,,, click,,,,,,click
OF COURSE we’re a Caterpillar authorized remanufacturing facility! why would you even ask?
these guys look like they know what they’re doing, but I doubt there’s a calibration certificate for that torque wrench…
Caterpillar parts delivered by FedEx are still going to be expensive in any country
These mechanics have problems ,they assemble the engine using irregular tightening sequence AND before the engine starts the mains bearings are already strained and such alters the engine oil pressure whats problem...desert mechanics😂😂😂😂😂❤❤❤❤ but kudoos at least they are using the torque wrench for standard strengths ....from centre..diaonally and horizontally,such is inevitablekkkmm
I think your just jealous cause they are showing you a few points
😊😮😅😮😅😮
These guys are great they are very smart and work hard well done fellows you guys make no excuses and get shit done
I will feel very happy if I get a chance to learn with you
You would be learning the wrong way to do things too.
Well...that wont run for very long....totally not surprised that the video ends before we hear it purring like a kitten.
De cuánta silindrada es el motor 👍👍
En 3:05 no será peligroso aumentar el brazo a esa llave par apretar esa tuerca....al igual que en 6:20....!!?
こう言うのじゃないんだよなー。
折れたクランクシャフトを溶接で継いだり、穴の空いたエンジンを塞ぐとかの修理をこのチャンネルには求めてる
почему нет продолжения видео ????
Did this in the shop the other day😅
These guys do it outside in the dirty
Awesome dork wrench?
We can always complain and pick little gripes but that thing will run just fine besides the parts the labors super cheap
well those old pistons should slide easy
Хоть я и не моторист, но на это больно смотреть
А что не так?
@@grischapupker8258 наверное все, так собирать моторы только индусы могут, это пиздец
@@grischapupker8258 песок по всем внутренностям двигателя
@@grischapupker8258 если это капиталка, то почему новые кольца, на старые поршни и в новый цилиндр?
سلام ارادت- کار عالی بود لذت بردم
ولی اینکه موقع جمع کردن موتور ۲۰ نفر دور موتور جمع میشوند و هر کدوم قسمتی رو دست میزنند ایا حواس و دقت عمل مکانیک یا اوستا رو بهم نمیزند از اینکه فلان قطعه یا پیچ خوب بسته شده یا در جای خود خوب فیت شده است یا هر ۲۰ نفر اوستا و مکانیک هستند ؟!!
با تشکر از کلیپ خوبتون ❤
Dont check liner protrusion....the gasket goo will take up any discrepancies!
Very good 👍
بہت عمدہ..مگر انجن سٹارٹ ھو یا نہی...چند سکینڈ اس پر بھی دے دیتے..
I'm just thinking , DOE'S these rebuilds come with a 2 year 100,000 miles warranty. Adapt , improvise , overcome , at it's best .
That's it for me Guys, come on , NOT EVEN A NEW OIL PUMP . So much work & NO NEW pump OR pistons . False economy. 100% you'll be fixing this engine again soon
Может просто в кадр не попало?
Ты механик?
Wayyyyyyyyyyyyyyyyyyyy too much sealer!!!
You clowns need a large caulking gun of sealer & double gasket everything! lol
No matter, it will be back within a month if not sooner, smoking it's lungs out & rattling!!
I saw the chain wench and I jokingly thought "WOW, next will be an actual torque wrench." And I wasn't disappointed.
how much torque on main caps? oh about 4 feet of cheater bar worth
The only tool missing they didn't use plastigauge to check bearing clearance
@@MichaelFazio-ys8ly Thanks for watching 🙌
Torques bolt head, conrod, main bearing
Good for another 3 hours lol.
I live in Orange County California most young people are total lazy and bums and do drugs all day and steal from Walmart how can you say anything bad about these guys😂
All that work then put old burnt up pistons back in. False economy
Why are you stealing thumbnail images?
Que le pasó en el dedo? Pregunta mi hijo. Gracias.
This whole build was awesome until I saw those ITR filters...
اخرش روشن شدنش رو ندیدیم 🙄
похоже они его так и не вали.
Contamination Control ….😂😂😂😂
Alguien se ha fijado donde cahe el aceite del carter....??
Y allí no passa nada...😢😢😢
Questi lavorando sono preistorici
warum schrauben die den motor nicht gleich in der sahara zusammen ????
the torques on that main bearing caps was a little dodgy
Not one torque wrench on the whole job not one rachet to do the nuts up. Someone buy them some tools.
Thanks for watching 🙏
Where is this?
Pakistan..
Does anyone here know what the client wanted?
How much is this work? Is it for free?
You probably just didn't get that memo. Yeah, all industrial sized engine rebuilds are free now. /s
You bozo, of course it's not free. There are thousands of US $$$ in parts alone.
It cost five goats and one young boy...
@@DavidVanHelden1😂😂😂😂😂😂😂
Good grief.
So many bad practices.
I guess if you can't fix it with a hammer it must be an electrical problem.
@@mongoblazingsaddles9440 Thanks for watching 🙌