I always know where to go when I have a problem with my Banshee thank you sir for all of your hard work and very detailed videos it has helped me very much thank you
Watched just about all of your videos. You do a really good job and I want to say keep up the good work. They are very helpful and viewers greatly appreciate your Banshee knowledge and the fact you share it with the rest of us.
Once again a great video,you are indeed a very talented technician I would say you are the "Banshee Master"with all of your expert knowledge,so good of you to share it with us all.Many Thanks.
Awesome video on the banshee. I just recently purchased a 2005 banshee. Used and things ran good for a week. Now I’m having issues with opening it up full throttle. Starts to sputter and bog down. It idles just fine when you start it up. Just when you get going and throttling up.
I just bought a banshee and had to rebuild it and I'm having problems with it running rich on all stages and it seems to bog in all stages I dont get a crisp sound at all. Do I need to screw out the air mixture screw or do I need new carbs?? I'm really new to banshee and cant seem to figure it out lol. Any help thanks
My banshee bogs a little on on idle when I give it some throttle I tried adjusting the air screws to half turn out n it seems to still bog a little do I need bigger pilots I just rebuilt the motor 64mm pistons cool head with 20-21cc domes n fmf gold series pipes I got 300 mains in rn but the pilots that came with the jet kit don’t have the size numbers on them
How often does the pilot get clogged up? I cleaned it back in 2016 and only ride it once a month. But Christmas 2018, everyone was riding then we had to stop cause the right side got was cold after a few hours in. I did not think it was the carb cause I thought it would stay clean long like my raptor. Thanks for this video. I know the source of the problem now.
Great video brother, very informational and you cover everything. I have a basically stock banshee, other than Toomey T5s and k&n air filter pods. I live in Oregon about an hour and a half from Winchester Bay. My elevation here is only around 500 feet. I used to have a stock banshee and never messed with anything in the carbs. My question on my new to me banshee is, for my pipes(T5s) and pod air filters, where is a good place to start with jets, main and pilots? Also, whats a good fuel mix ratio to start at? I always ran 40:1in my old stock banshee, and I would rather have more oil than not enough. Thanks for any help.
I have a question So yesterday I put a whole new top end on my banshee and cleaned the carburetors good like how I learned from your video (how to clean carbs) but now when I go to crank my bike up it won’t start.... (cold start ) it only starts if I spray carburetor spray in the carbs do you have any idea or Solutions? PLEASE NEED YOUR HELP!!! OH YEAH AND I ALREADY BROUGHT BRAND NEW SPARK PLUGS AND IT WONT START unless I spray carburetor cleaning into the carbs
Just got a 98 banshee it starts after a few kicks but turns off at idle. If I try to give it gas it chocks after a few secs and turns off. New to 2 strokes I changed the plugs and checked carbs looked okay
Been going through steps to solve Banshee not starting. Hit this video and realized my connecting hose was sitting on my case. Connected carbs and voila. Seems to be the issue. 🤔 Thanks
Just picked up a 02 yamaha banshee. Runs, drives, and idles. Gas comes out the overflow, its a constant drip. I also noticed it doesnt always want to open up, seems as if its cutting in and out. Im guessing it needs the carbs cleaned? Its bored .40 over with vitos super stock pistons, k&n pods, v force 3 reeds, not sure about porting, any tips would help. Gonna rip the carbs off tomorrow and clean them out. Hopefully thags the issue. Im about 1600ft above sea level. Another thought i had was maybe its running a little rich.
I hope this works for my i have the same problems left side pipe not showing no smoke or firing it did for the first start but it idle very high it came down and idle for 20 second and it shut of .I kick started it again that's when it notice left pipe not smoking just the right side.
Hey man just did a top end rebuild on a 2001 banshee that sat for like 8 years. Clean out the carbs pretty well I thought. Put new reeds in and new oil. Bike will start with starter fluid and will keep running if throttle is applied but will not idle. It will just die if you let it. I know there’s nothing you can do without seeing the bike but, is there any tips or tricks you could pass along my way? Thanks buddy love the videos.
Just bought my banshee from an older guy My banshee is throwing more smoke on the right side when it starts but evens out when warm up . 3rd time I turn it on today and my throttle got stuck wide open had to turn it off did that twice today not sure what that is . I only run tha quad once since I had it ran good probably been two weeks since I turn her on
I've got a problem my bike runs good and strong when I'm in the throttle pretty good. But if I'm in the woods or climbing hills in tight area I have to stay on the clutch because it takes way to long for the power to come on good. I've changed jets up and down sizes raised and dropped the needles when I'm in the power it runs great. But sucks in the woods. Any info would be great thanks I've watch all your videos and dont know what to try.
Also the bike is stock with fmf pipes I'm running air box with kn and lid rite now I'm running 30 pilots and 280 main. I just picked up this bike it has a new top end one of those real cheap kits. Maybe that's it
First off I want to say your videos are a huge help. Thank you for them. Quick question. I have an 02 banshee stock. Just ordered v force 4 reeds, pro circuit pipes, k&n filter with pro flow adapter. Stock air box with holes. I'm in Miami about 8' above sea level and mostly in the 80's temperature. I ordered 27.5 pilots and 330 mains. Does this sound about right for the jetting?
Franky U That’s gonna be a little rich but your definitely close. An air box with a lid and holes would fall around the 290-300 range. No lid 310 Pods 320-330
Maybe you can help me i just cleaned my carbs jetted them for t6 290 mains 25 pilots. If i roll the gas it pulls hard but still kinda falls on its face. If i pin it it bogs and pops
A little bit off the topic but so I have an ebay fly wheel and the bike won't ever idle right, starts up cold easy and will always die after a minute or 2 but that's it....I've tried leaning it out and then a smaller pilot no luck my idle screws are even all the in now and it made a very small difference
South Texas Banshee Thanks for the video. Im need stator for banshee. What you think about rm stator. Or do have extra oem that i can purchase thanks man
Off topic but iam separating a banshee case and i have everything off i watched your video on separating cases but i belive it has been apart once and i belive they used a diffrent sealent or something its a white ish sealent and the cases wont split i been trying to beat on it with a hammer and they wont seperate iam scared i might break the case if i hit it to hard what should i do
brayp211 if you didn’t get it by now, make sure you didn’t miss a bolt or not. The one by the clutch arm can be sneaky. I have seen some cases get really stuck. You just have to keep working with them until they start to separate
South Texas Banshee i just got them separated thanks for the response i just kept working it around for like 10 minutes and got them separated it i was worried i could never get them split lol now to continue this build. thnks btw
Guys my right pipe smokes but my left pipe dont smoke at all eany tips or hints plzz?. All i can remember i replaxed the needle and seats and when that was replaced i brought the atv back to my house . The 1st thing i did was pulling out the choke and then the right carb suddenly leaks alot of feul. Closed the feul line after that . Then i gave my 1st start but after the 1st start no smoke on the left just on the right . But the bike seems to run fine . ?? Help please
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
Exclent job explaining the carborator. Thank you
Even though this video is 5 years old just know it’s still helping people in 2022 🙏
I always know where to go when I have a problem with my Banshee thank you sir for all of your hard work and very detailed videos it has helped me very much thank you
Watched just about all of your videos. You do a really good job and I want to say keep up the good work. They are very helpful and viewers greatly appreciate your Banshee knowledge and the fact you share it with the rest of us.
Your so right but he makes it look so easy you can tell he is super knowledgable about this ... Really helpful
I realize I'm quite off topic but does anybody know a good website to stream new tv shows online?
@Allan Jamal flixportal xD
@Otis Braxton thank you, I went there and it seems to work =) I appreciate it !!
@Allan Jamal you are welcome =)
Once again a great video,you are indeed a very talented technician I would say you are the "Banshee Master"with all of your expert knowledge,so good of you to share it with us all.Many Thanks.
Perfect Video!!!! On way home now to pull a carb. Might pull both since you make it look so easy!!
I just finished a fresh build all the way down here in Australia 🇦🇺 and i use all your videos for reference. .. Cheers..
my guy! you are awesome! thank you for these great instructional videos.
Awesome video on the banshee. I just recently purchased a 2005 banshee. Used and things ran good for a week. Now I’m having issues with opening it up full throttle. Starts to sputter and bog down. It idles just fine when you start it up. Just when you get going and throttling up.
Did you find a solution
Mine is doing same too
Thank you for all the videos you make they are so helpful.
Thanks for sharing knowledge on that needle. For years it was always weak at the start like I felt it would die but mid to full was strong.
God bless South Texas Banshee!!! Thumbs up!
Awesome video and great explanation man
I have the same exact issue, cleaning my carbs this week once I get a few moment
I just bought a banshee and had to rebuild it and I'm having problems with it running rich on all stages and it seems to bog in all stages I dont get a crisp sound at all. Do I need to screw out the air mixture screw or do I need new carbs?? I'm really new to banshee and cant seem to figure it out lol. Any help thanks
My banshee bogs a little on on idle when I give it some throttle I tried adjusting the air screws to half turn out n it seems to still bog a little do I need bigger pilots I just rebuilt the motor 64mm pistons cool head with 20-21cc domes n fmf gold series pipes I got 300 mains in rn but the pilots that came with the jet kit don’t have the size numbers on them
If the piolet jet is bad would it cause no start even if u have spark
How often does the pilot get clogged up?
I cleaned it back in 2016 and only ride it once a month. But Christmas 2018, everyone was riding then we had to stop cause the right side got was cold after a few hours in. I did not think it was the carb cause I thought it would stay clean long like my raptor.
Thanks for this video. I know the source of the problem now.
That definitely helps. Well done. Thanks.
Great video brother, very informational and you cover everything. I have a basically stock banshee, other than Toomey T5s and k&n air filter pods. I live in Oregon about an hour and a half from Winchester Bay. My elevation here is only around 500 feet. I used to have a stock banshee and never messed with anything in the carbs. My question on my new to me banshee is, for my pipes(T5s) and pod air filters, where is a good place to start with jets, main and pilots? Also, whats a good fuel mix ratio to start at? I always ran 40:1in my old stock banshee, and I would rather have more oil than not enough. Thanks for any help.
THIS VIDEO IS TITS MAN!!!!! SOUTHTEXASBANSHEE HARNESS SOLID GOLD!!!!!!!
Thank you!!!!!
I have a question
So yesterday I put a whole new top end on my banshee and cleaned the carburetors good like how I learned from your video (how to clean carbs) but now when I go to crank my bike up it won’t start.... (cold start ) it only starts if I spray carburetor spray in the carbs do you have any idea or Solutions? PLEASE NEED YOUR HELP!!! OH YEAH AND I ALREADY BROUGHT BRAND NEW SPARK PLUGS AND IT WONT START unless I spray carburetor cleaning into the carbs
Just got a 98 banshee it starts after a few kicks but turns off at idle. If I try to give it gas it chocks after a few secs and turns off. New to 2 strokes I changed the plugs and checked carbs looked okay
Been going through steps to solve Banshee not starting. Hit this video and realized my connecting hose was sitting on my case. Connected carbs and voila. Seems to be the issue. 🤔 Thanks
Just picked up a 02 yamaha banshee. Runs, drives, and idles. Gas comes out the overflow, its a constant drip. I also noticed it doesnt always want to open up, seems as if its cutting in and out. Im guessing it needs the carbs cleaned? Its bored .40 over with vitos super stock pistons, k&n pods, v force 3 reeds, not sure about porting, any tips would help. Gonna rip the carbs off tomorrow and clean them out. Hopefully thags the issue. Im about 1600ft above sea level. Another thought i had was maybe its running a little rich.
Video helped alot thanks ..
Can you do a video on chain slide and roller replacement
I hope this works for my i have the same problems left side pipe not showing no smoke or firing it did for the first start but it idle very high it came down and idle for 20 second and it shut of .I kick started it again that's when it notice left pipe not smoking just the right side.
Hey man just did a top end rebuild on a 2001 banshee that sat for like 8 years. Clean out the carbs pretty well I thought. Put new reeds in and new oil. Bike will start with starter fluid and will keep running if throttle is applied but will not idle. It will just die if you let it. I know there’s nothing you can do without seeing the bike but, is there any tips or tricks you could pass along my way? Thanks buddy love the videos.
Any luck my sheep does the exact same thing but my left side is cold starter fluid really helps alot
Just bought my banshee from an older guy My banshee is throwing more smoke on the right side when it starts but evens out when warm up . 3rd time I turn it on today and my throttle got stuck wide open had to turn it off did that twice today not sure what that is . I only run tha quad once since I had it ran good probably been two weeks since I turn her on
Are you going to post some of the Oregon Dunes footage soon??
TrailBlogger I watch all your vids!!!!! No way trail blogger is on here!!!
Also great video keep up the good work
What’s ur thoughts on the Boost Bottles? Waste or good investment? Love the videos they have been huge help, thanks
I've got a problem my bike runs good and strong when I'm in the throttle pretty good. But if I'm in the woods or climbing hills in tight area I have to stay on the clutch because it takes way to long for the power to come on good. I've changed jets up and down sizes raised and dropped the needles when I'm in the power it runs great. But sucks in the woods. Any info would be great thanks I've watch all your videos and dont know what to try.
Also the bike is stock with fmf pipes I'm running air box with kn and lid rite now I'm running 30 pilots and 280 main. I just picked up this bike it has a new top end one of those real cheap kits. Maybe that's it
First off I want to say your videos are a huge help. Thank you for them. Quick question. I have an 02 banshee stock. Just ordered v force 4 reeds, pro circuit pipes, k&n filter with pro flow adapter. Stock air box with holes. I'm in Miami about 8' above sea level and mostly in the 80's temperature. I ordered 27.5 pilots and 330 mains. Does this sound about right for the jetting?
Franky U
That’s gonna be a little rich but your definitely close. An air box with a lid and holes would fall around the 290-300 range. No lid 310
Pods 320-330
South Texas Banshee
Perfect, that makes sense. Thanks a lot! That's a huge help! Keep up the great vids.
Hey i just rebuilded my banshee and 1 pipe is really colder and almost doesnt smoke ive cleaned carbs before putting it together do you have an idea ?
Will a clogged jet cause a death rev?
What type of carbs do you have on your banshee and where can I get it
My throttle seems like it’s sticking it got stuck on me wide open any ideas bud
I’m in California I ride in Gorman what jetting should I use it around 4000 elevation
Maybe you can help me i just cleaned my carbs jetted them for t6 290 mains 25 pilots. If i roll the gas it pulls hard but still kinda falls on its face. If i pin it it bogs and pops
hey south texas banshee i need a stock size swing arm for my yamaha banshee do you know were to find parts ?
A little bit off the topic but so I have an ebay fly wheel and the bike won't ever idle right, starts up cold easy and will always die after a minute or 2 but that's it....I've tried leaning it out and then a smaller pilot no luck my idle screws are even all the in now and it made a very small difference
Jorge Pineda
I'd like to hear a video of it If possible man. could be a number of things
Jorge Pineda
I'd like to hear a video of it If possible man. could be a number of things
Jorge Pineda by any chance do you PWK's?
South Texas Banshee Thanks for the video. Im need stator for banshee. What you think about rm stator. Or do have extra oem that i can purchase thanks man
my banshee sometimes when he runs he stops sounding one of the pipes, the power does not reduce, which could be
good stuff!
Hi friend, my banshee more smoke right exhaust، what problem for this one?
if you put your hands in the exhaust is intermittent escape in one of the pipes
And great video by the way lol (as always)
Hi there my banshee is doing the same thing but my problem is i have one carby not to how do i fix that thanks im advance
Off topic but iam separating a banshee case and i have everything off i watched your video on separating cases but i belive it has been apart once and i belive they used a diffrent sealent or something its a white ish sealent and the cases wont split i been trying to beat on it with a hammer and they wont seperate iam scared i might break the case if i hit it to hard what should i do
brayp211 if you didn’t get it by now, make sure you didn’t miss a bolt or not. The one by the clutch arm can be sneaky. I have seen some cases get really stuck. You just have to keep working with them until they start to separate
South Texas Banshee i just got them separated thanks for the response i just kept working it around for like 10 minutes and got them separated it i was worried i could never get them split lol now to continue this build. thnks btw
Hey Any body know where I can find skid plates for alba long travel a arms
Why does one pipe blow out more smoke then the other one??
Guys my right pipe smokes but my left pipe dont smoke at all eany tips or hints plzz?. All i can remember i replaxed the needle and seats and when that was replaced i brought the atv back to my house . The 1st thing i did was pulling out the choke and then the right carb suddenly leaks alot of feul. Closed the feul line after that . Then i gave my 1st start but after the 1st start no smoke on the left just on the right . But the bike seems to run fine . ?? Help please
def carb issues. clean the card and adjust floats.
What paint did you use on the pipes ? Thanks
Henry Lewis
VHT flame proof header paint
What happens if you dont have the choke tube
What is that ringing sound when you hit the throttle? Sounds like metal tapping..mine does the same thing
Brandon Sr Everage
At what point in the video? Engine off or running?
Brandon Sr Everage it's the starting crank, every Banshee I've seen makes that ringing noise
Rafael G
Yep the kicker
What if im bogging on top end?
What about if one pipe smoke more on one side
my banshee was doing the same thing and only the cilinder runs with the choke on
Hi my friend i have a problem with my Banshee can you help me please
My banshee in low rpms sound like one cylinder firing
After pull throttle she works perfectly
I tried this and my left side still not working what’s wrong??
Why will the banshee only start with ether sometimes it starts after 10 kick without ether
Rolando Figueroa sounds like choke tube is leaking , reeds are weak , dirty pilots or possibly low compression. Sorry I can’t be more precise.
Tanks buddy I found the problem I had to rich up my air screw now it’s working fine
I have 2003 limited edition and bog out when I take off,Dropping fuel from float reservoir any tips I'll appreciate,Thanks
Did you find out the problem im haveing the same isue
Hello! Was wondering if there was any way to reach you directly via email/text? Wanting to inquire about a full rebuild if possible.
Can somebody tell me if it's good or bad that my Banshee is not smoking ???
Go 50.1 on mix ratio
Do you think you will see any
I love you man no homo 🙏
It has 34 mm carbs I cleaned but still
2024 🙏