Scroll Saw techniques for beginners
ฝัง
- เผยแพร่เมื่อ 10 ส.ค. 2021
- Scroll Saw techniques for beginners.
Sharing some of the techniques that serve us well when working with the scroll saw. When learning to use a scroll saw, learning and developing different techniques can help you to succeed in the scroll saw projects that you undertake. This explanation and demonstration highlights some of the simple methods we use to get the best out of the time we spend working with our scroll saw.
These simple scroll saw techniques have been learnt and developed over many years of working with the scroll saw on a daily basis here at our family workshop.
For the free scroll saw patterns, please refer to the dedicated page on our workshop website by following the link below.
www.thelovespoonworkshop.com/...
Use the link below and enter the discount code: lovespoons at the checkout for a 10% discount on all Starbond products.
bit.ly/3leQt7U
For more information about our family workshop check out our website www.thelovespoonworkshop.com/
For regular updates about the things we are doing find us on Facebook, Twitter and Instagram by searching for The Lovespoon Workshop.
Remember to take care and ALWAYS ensure your own safety when working with wood working tools and machinery. If in doubt don't do it!!
#scrollsaw #scrollsawbeginners #scrollsawtips - แนวปฏิบัติและการใช้ชีวิต
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
Love the close up of this, very useful info!
Hi, great to hear from you as always. Delighted to hear that the video was useful.
Thank you for continuing to support our TH-cam channel. All the best from us all here at The Lovespoon Workshop. 👍👍
I was listening the whole time, but I cannot lie, I liked the way you cut that piece. Well done on both ends, the cutting and the oral explanations provided Dai.
Hope it proves useful. It took a few goes at doing the voice over on that one, so hopefully it gives an insight into the process and method we use for cutting out on the scroll saw.
Thanks again for the positive feedback and supporting our TH-cam channel. All the best from us all. 👍👍
Thank you. I'm relatively new to scroll sawing and appreciate your instruction. Am also amazed at how easily you were able to do the scroll work using a straight blade. Well done.
Hi Sherwood, great to hear from you. Delighted to hear that the video was useful. I prefer working with reverse tooth blades and my favourite blade is the Niqua speed number 9 reverse tooth blade. Pegas and flying dutchman also make the same blade.
Thanks for supporting our TH-cam channel. All the very best from us all. 👍👍
Thank you!
Very useful. Thank you very much.
Hi Peter,
Delighted to hear that it is useful, that is the reason we share our videos with everyone.
Thank you for the positive feedback and supporting our TH-cam channel. All the best from us all here at The Lovespoon Workshop. 👍👍
Brilliant video! Great skill on the piece here
Thank you, hopefully it will be useful for anyone who is interested in learning how to use a scroll saw.
Thank you for supporting our TH-cam channel, all the best from us all here at The Lovespoon Workshop. 👍👍
Beautiful work and lovely commentary.
Thanks Terry, really appreciate the positive feedback.
Thank you for supporting our TH-cam channel. All the very best from us all. 👍👍
Thank you for this ! I'm looking to buy a scroll saw and this was helpful. And, nice work on the piece !
Hi Shawn, great to hear from you, delighted to hear that this was useful. We work with the Hegner multicut 2s, a great scroll saw to make all sorts of things with.
Thanks for supporting our TH-cam channel, all the best from us all here at The Lovespoon Workshop. 👍👍
Hi I just seen you on Antiques road trip here in Scotland as soon as I seen the love spoon s I thought to my self if it was your family work shop and it was good see on TV nice one
Hi David, hope you enjoyed seeing our work on the television.
Thanks again for supporting our TH-cam channel. All the very best from us all here at The Lovespoon Workshop. 👍
Very good, thank you.
Hope it is useful.
Thank you for the positive feedback, all the best from us all here at The Lovespoon Workshop. 👍👍
Great first saw
It's served our family business very well over the past 25+ years.
Thanks for supporting our TH-cam channel, all the very best from us all. 👍
Thank you just watched your video. I’m just started and there are some great tips. I also subscribed!
Thanks for subscribing. Hope the videos prove useful. Hope you enjoy learning to make things with the scroll saw too. It's a great machine to work with.
Thanks again for supporting our TH-cam channel. All the very best from us all. 👍
Thank you 🙏
You're very welcome. Glad the video was useful.
Thank you for supporting our TH-cam channel. All the very best from us all. 👍👍
I am going to buy this it looks really useful
Hi Aamir, well worth investing in a scroll saw. So many different things you can make.
Thank you for supporting our TH-cam channel. All the very best from us all. 👍👍
que excelente trabajo que haces
Muchas gracias Jaime, felices fiestas de todo el mundo aqui en nuestra taller en Gales. 🎄🎄✨✨⛄⛄🎅🎅
Very nice degine created,,, and very useful video Sir,, salute you,,
Thanks for the positive feedback, it is very much appreciated. Delighted to hear that the video was useful.
Thank you for supporting our TH-cam channel, all the best from us all here at our family workshop in West Wales. 👍👍
Danke
Thanks for your our TH-cam channel, all the very best from us all. 👍
I just bought my first scroll saw very excited and a bit nervous to try it out.... I'm watching lots of you experienced ppl on TH-cam glean what I can..hopefully I'll get good at this.. 😅
Great stuff, hope you enjoy working with the scroll saw. Let us know if you have any questions, always happy to help out.
Thanks for supporting our TH-cam channel. All the very best from us all. 👍
that is a nice video
Thank you, glad you enjoyed the video.
Thanks for supporting our TH-cam channel. All the very best from us all. 👍👍
Thank you for the advice on sprial cut blades I've switched to reverse blades much better
Hope they do a good job for you Wayne. They've certainly served us well over the years.
Thanks again for supporting our TH-cam channel, all the very best from us all. 👍
Hi guys! My nome is Francisco Rääts and Im from Brasil and I'm 60yo and a woodworking for more than 40 years but new on scroll saw, could you help me with a question? How the best height or position to work with my scroll saw? Congratulations for your amazing work, and excuse me my poor English. Big hugs to all
Hi Riccelli, great to hear from you and thank you for your kind words. Your English is very good too. When it comes to the height of the machine we like to have it around elbow height when seated. Personal preference does play a part too. For example I prefer to be closer to the machine and use a lower chair. My father prefers to be higher up so uses a bar stool height seat, as he finds this more comfortable.
Hope that helps and gives a little more insight. Thanks for supporting our TH-cam channel. All the very best from us all. 👍👍
when i was young, my brother used to do something extremely similar to this but the tool was hand-held. Do you by chance know what it is called and/or do you have any videos of this craft being done with the hand-held tool? i know the name of the tool in my language - maltese - but definitely not in english nor did i come across videos using it... He was a boy at the time and many boys used to do it - we didn't have tablets or video games back then!!!! (video games had just started and nobody could afford them so children did crafts. Boys with wood, girls with knitting! 30 years ago...)
A Coping saw or fret saw would be two hand tools that would allow you to do a similar job. Thanks for getting in touch, all the very best from us all. 👍
@@DailovespoonsThomas thank you for that. YES!!! That is it, the second one: coping saw!!! th-cam.com/video/SmO3P-97z8o/w-d-xo.html - in the video it is not the tool my brother used but it is hand held too. They don't teach this in malta any more and i wish they did. (It would be a good craft to teach to prisoners and they could pass time doing something useful and beautiful!)
What's the thing that was vacuuming the dust called?
With the Hegner scroll saw you have the blower at the top that keeps the line of sight clear as you are cutting. You also have the option of attaching a dust extractor to the machine to collect the sawdust.
Thank you for getting in touch and supporting our TH-cam channel. All the very best from us all. 👍👍
My saw only use pin end blades. Does anybody make a round blade oin end?
Hi Samuel, thanks for getting in touch. I use pinless blades myself. So not as familiar with the options that are available when it comes to pin end blades. Most of what is available for pinless blades is available in a pin end version too. Olson, pegas and record all make pin end blades so might be worth a look for what you want in their ranges.
Thank you for supporting our TH-cam channel. All the very best from us all. 👍👍
Waw
Hi Kamal, hope the video was useful. Thanks for supporting our TH-cam channel.
All the best from us all here at The Lovespoon Workshop. 👍👍
I just bought a scroll saw but don't know how to it yet
Hi Stan, great to hear from you. The scroll saw is a fantastic machine that will allow you to make all sorts of different items in wood. If you have any questions, feel free to ask. We have lots of different videos demonstrating the methods we use on our channel.
Thank you for supporting our TH-cam channel. All the very best from us all. 👍👍
How much cost the machine?
Hi again, great to hear from you. The scroll saw we use is a Hegner Multicut 2s. To buy it new costs between £800-1200. However, you can often find them on ebay for between £250-500 second hand. You can contact Hegner for any spares required too.
We have 2 of them here at our family workshop in daily use. They both work perfectly after being in daily use for 20+ years.
Thanks again for supporting our TH-cam channel. All the very best from us all. 👍👍
Great vid but gee yrs voice does my head in
Thanks Nige, glad you enjoyed the video.
Thanks for supporting our TH-cam channel. All the very best from us all. 👍👍
साकलासैकि मेसिन का वेलेट भेजावा छाक्त है सार आप
Hope the video was useful, thanks for supporting our TH-cam channel. All the very best from us all. 👍👍
as