Nice vid :) Hope u don't burn too many holes in Mums nice lace table cloth. I think ur soldering iron could use a clean too, doesn't seem to solder too well.
It would be better if you made the 6 pins connection to directly connect usb to ttl on the same circuit. But nice work. Provided ready made layout thank you..😃
I used USB-to-TTL module to upload the could on the chip, kindly see this video to know how to do this: Programming ATmega328p Using USB to TTL th-cam.com/video/tiETAwkxnmw/w-d-xo.html Have a nice day, sir! :-)
I like ur Arduino Clon, but, the proble that I found with ur model, is that will work only with a 5v power supply; but, well, that's the price to be under the buget I guess.
You probably dont care at all but does any of you know of a method to log back into an instagram account? I somehow lost my account password. I would appreciate any assistance you can offer me!
@Otto Tobias i really appreciate your reply. I found the site on google and I'm in the hacking process atm. Takes a while so I will reply here later with my results.
Hello friend I want ask something, 1) U don't use any Regulator on Arduino isn't this dangerous(So maybe your Adapter won't send 5V ) 2) And you didn't put AREF, SDA, SCL aren't they necessary
Hi Cebrail, for the first question, you’ll probably want to use a regulated power supply, however, the ATmega328 chip supports a voltage range from 1.8 to 5.5 volts, so I believe you’ll be good to go with any 5v adapter. For the second question, pins like SDA & SCL are indeed analog pins A4 & A5 respectively, so please refer to the ATmega328 pinout diagram. Please if you still have any doubts, feel free to reply back or email me at: admin@basseltech.com Have a great day! :-)
Hi Shahrul, Can you check the link again? If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
Yes it doesn't, and to program it I used USB-To-TTL as illustrated in my video (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html Have a nice day! :-)
You're welcome, Shukla. Stay tuned for more! If you have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
Please sir re-check the blog post now: basseltech.com/watch?v=1r0--O7nvpQ I've added the circuit schematic that is in the eagle CAD project. If you have any further questions concerning the schematic or any other topic, feel free to email me at: admin@basseltech.com Thank you sir! :-)
Dear sir, there are several ways to program Atmega328p chip. The method I used was programming it using USB-to-TTL. For more info, kindly check my tutoria (How to Program ATmega328p Using USB to TTL?): th-cam.com/video/tiETAwkxnmw/w-d-xo.html Thanks! For further questions feel free to ask me here or email me at: admin@basseltech.com Have a great day, sir! :-)
Hi Ratnajit, I have two tutorials showing how to program the ATMEL ATmega328p-pu chip. (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html (Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
Hi, I have two tutorials showing how to program the ATMEL ATmega328p-pu chip. (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html (Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
Dear sir, you can reach the downloadable files from this link: basseltech.com/watch?v=1r0--O7nvpQ If you're having any troubles kindly contact me on my email: admin@basseltech.com or comment on the video. Thanks!
أخي فيديو رائع, أريد أن أعرف ما إسم المحلول الدي وضعت فيه البوردة, لو سمحت الإسم بالعربي و الفرنسي وهل يوجد بديل له, سؤال ثاني ما هو دور الكحول الدي إستخدمتة لتنطيف البوردة , و أخيرا هل البوردة قابلة للتعديل كمثال - منظم الجهد- , -مدخل يو أس بي - , أخي بارك الله فيك على ماتقدمه في قناتك شكرا
اسم المحلول: كلوريد الحديديك. إستخدام الكحول كان لتنظيف البوردة وإزالة الحبر الناتج من عملية النقل الحراري للحبر من الورقة إلي البوردة. أما بخصوص النقطة الأخيرة فمن الممكن تعديل البوردة كما تشاء يمكنك تحميل النموذج المستخدم من الرابط في صندوق الوصف وتعديله بإستخدام برنامج Eagle CAD. أتمني أكون أجبت عن جميع أسئلتك، وتقدر تتواصل معي في أي وقت عن طريق البريد الالكتروني: admin@basseltech.com
One way is to program the ATmega328p using USB to TTL, kindly check my video (How to Program ATmega328p Using USB to TTL?): th-cam.com/video/tiETAwkxnmw/w-d-xo.html Thanks! :-)
Dear sir, I currently don’t have a tutorial on burning bootloaders. But I recommend you to watch this video: th-cam.com/video/g90xb0nNX50/w-d-xo.html Thanks. And I apologize for my late reply. Have a great day! :-)
Hi Arya, I have two tutorials showing how to program the ATMEL ATmega328p-pu chip. (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html (Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
Hi Shakil, I have two tutorials showing how to program the ATMEL ATmega328p-pu chip. (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html (Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
You can get it from any electronics components re-seller or online from websites like ebay: www.ebay.com/itm/10pcs-One-Side-Copper-Clad-50x70x1-5mm-Single-PCB-Board-Glass-Fiber-5-7cm-/332341695287?epid=1231417471&hash=item4d611bd337:g:igAAAOSwk6pZgEur
Kindly visit our blog post for this tutorial: basseltech.com/watch?v=1r0--O7nvpQ To view the eagle CAD project (schematic and board), you'll need to download for free EAGLE software: www.autodesk.com/products/eagle/overview
Thank you for your comment. Well, here I'm supplying a regulated 5V power to the board. Not all Arduino boards have surface mount chip; the Arduino Uno, for example, has a dip package chip. This video is considered as a simple cheap clone to Arduino Uno. Have a great day, and I apologize for my late reply! :-)
sir please provide me circuit diagram and component list. How can we program this arduino without TTL please modify this circuit and design new one from wich we could program our arduino without another circuit. please sir reply me design another circuit with all connection like usb as sama as original arduino........ waiting for our response email me........
Hi Techno Vision, Kindly follow the link in the video description and you'll find all what you need! If you still have any doubts, feel free to contact me. Have a nice day! :-) Email: admin@basseltech.com Kik: kik.me/basseltech/
برجاء زيارة الرابط الموضح في صندوق الوصف الخاص بالفديو. إذا كنت تواجه أي مشكلة، يمكنك التواصل معي عبر تطبيق kik أو عن طريق ال Email. Email: admin@basseltech.com Kik: kik.me/basseltech
Muy bueno una solucion muy practica, saludos y mucho exito. Tal vez quieras visitar mi página, tengo alguas experiencias interesantes que te pueden gustar, por ahora está in ingles. Saludos desde santiago de chile. www.thebytespace.cl o puedes seguirme en instagram instagram.com/thebytespace/
One way is to program the ATmega328p using USB to TTL, kindly check my video (How to Program ATmega328p Using USB to TTL?): th-cam.com/video/tiETAwkxnmw/w-d-xo.html Thanks! :-)
Thanks for making this tutorial. This tutorial is easy to understand and straight to the point. Great video!
Nice vid :) Hope u don't burn too many holes in Mums nice lace table cloth. I think ur soldering iron could use a clean too, doesn't seem to solder too well.
It's not that easy to solder with the camera at that position LOL! Anyway, many thanks and your comment is very appreciated! :)
Don't be too concerned about Peter Jansen, he is angry about his incredibly tiny wiener.
Peter, when are you going to stop being a virgin?
You could easily have it manufactured by JLCPCB for $2 for 10 pcbs. You just wasted money and chemicals on this...
@@torpi7312 Don't forger about a shipping, which is $5-20. And just for one testing pcb it is better to make it at home
Thanks. You know you can use a liquid tinning solution on those copper traces.
Great tip! Thank you!
Great job on the board
Thank you Dana! Have a great day! :-)
It's standalone... Nice work👍... Great u just wasted a 328atmega to make a blinker... 😳Now, what to do with a blinker, not much to here... 🤔
It was just for demo. I'm sure you'll figure out something more useful! 😉
That's why I prefer SMD. If you don't want to die right on the workplace drilling all these holes...
It would be better if you made the 6 pins connection to directly connect usb to ttl on the same circuit. But nice work. Provided ready made layout thank you..😃
Hi Avinash,
Thank you for the tip! Have a nice day! :-)
That turned out very nice! Thanks for sharing!! :-)
sir you haven't applied USB plug, then how you have uploaded softeare
I used USB-to-TTL module to upload the could on the chip, kindly see this video to know how to do this: Programming ATmega328p Using USB to TTL th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Have a nice day, sir! :-)
I like ur Arduino Clon, but, the proble that I found with ur model, is that will work only with a 5v power supply; but, well, that's the price to be under the buget I guess.
Hi Johan,
Thank you for your comment.
Yes indeed it'll work with a 5V power supply. Otherwise, you'll need a voltage regulator.
Have a nice day!
Can u please provide me the design of bluetooth module or can you make a video on that too..
Can we burn the microcontroller frist in the Arduino uno board itself and then use the same microcontroller for the following PCB will it work?
Yes, surely it will work! :-)
Thankyou for the tutorial. I was looking to add USB to the custom Arduino can you please share some tutorials on that too to make HID devices
You probably dont care at all but does any of you know of a method to log back into an instagram account?
I somehow lost my account password. I would appreciate any assistance you can offer me!
@Zane King instablaster ;)
@Otto Tobias i really appreciate your reply. I found the site on google and I'm in the hacking process atm.
Takes a while so I will reply here later with my results.
@Otto Tobias It did the trick and I now got access to my account again. I am so happy!
Thank you so much, you saved my account !
@Zane King Happy to help =)
How to print schematic on paper? is it sufficient to have inkjet or do we need to print it through laser printer?
It requires a laser printer, inkjet printer would probably not work. But you can give it a try and tell me how it went. :-)
Hi sir, how can i put an led for status in this design? Thanks
th-cam.com/video/z8SVXHxCeW4/w-d-xo.html
led in pin 13
Really nice! But do i need glossy Photo Paper to make it work? The toner is on normal paper also, isnt it?
Thank you sir!
Unfortunately, normal paper won't work. You will need either photo glossy paper or transparent paper.
Have a great day, sir! :-)
Thank you Sir for your fast answer! Transparent means some plastic film? Have a great Day Sir, too. Sir!
Yes sir, exactly! :-)
Thank you Sir!
You're welcome sir!
Hello friend I want ask something, 1) U don't use any Regulator on Arduino isn't this dangerous(So maybe your Adapter won't send 5V )
2) And you didn't put AREF, SDA, SCL aren't they necessary
Hi Cebrail, for the first question, you’ll probably want to use a regulated power supply, however, the ATmega328 chip supports a voltage range from 1.8 to 5.5 volts, so I believe you’ll be good to go with any 5v adapter.
For the second question, pins like SDA & SCL are indeed analog pins A4 & A5 respectively, so please refer to the ATmega328 pinout diagram.
Please if you still have any doubts, feel free to reply back or email me at: admin@basseltech.com
Have a great day! :-)
@@BasselTech but there is also a 3.3v output which would require one but that was also missing
Voltage divider
can i use it for any project after programming by arduino uno??
Yes you can
Very nice tutorial. Thanks!
Thank you sir for your nice comment! Have a great day! :-)
thats a realy nice video.though you should learn how to solder
Thank you for your comment and for the advice! Have a great day! :-)
Very good job thanks please how can I be able to make arduino and h bridge driver to run a 24v 48amp motor thank you
How much voltage power supply it requires ?
how will you take analog inputs or give analog outputs without a ADC converter ?
Can someone give me the item that he use to build and how the process for this arduino..i cant access to their website..idont know why
Hi Shahrul,
Can you check the link again?
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
This doesn't have a serial to usb IC. It can't communicate using Serial.print command, can it?
Yes it doesn't, and to program it I used USB-To-TTL as illustrated in my video (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Have a nice day! :-)
How much cost that u spend for this Arduino ?? Reply fast and thks....
This project costs around 4$ (excluding the etching solution FeCl3).
Very helpful bro thanks
You're welcome, Shukla. Stay tuned for more!
If you have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
Did you use a voltage regulator?
tell me which usb to ttl are you using , CH340,FT232 ???????
Usb-to-TTL CP2102
Is it possible to run sensor related complicated codes in this board ?
Yes sure! It’s the same as an Arduino Uno! :-)
sir there is no circuit diagram please give me circuit diagram
Please sir re-check the blog post now:
basseltech.com/watch?v=1r0--O7nvpQ
I've added the circuit schematic that is in the eagle CAD project.
If you have any further questions concerning the schematic or any other topic, feel free to email me at: admin@basseltech.com
Thank you sir! :-)
where is usb-B port ??? how u can program it without usb port ??? PLEASE REPLY
Dear sir, there are several ways to program Atmega328p chip. The method I used was programming it using USB-to-TTL.
For more info, kindly check my tutoria (How to Program ATmega328p Using USB to TTL?): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Thanks! For further questions feel free to ask me here or email me at: admin@basseltech.com
Have a great day, sir! :-)
how much voltages are needed to run this pcb arduino
You need a 5v dc power source for this arduino version. :-)
كيف برمجته
How to programming and upload code
أخي العزيز، لقد برمجته باستخدام (USB-To-TTL)، وهذا فيديو يوضح كيف تبرمجه بهذه الطريقة:
th-cam.com/video/tiETAwkxnmw/w-d-xo.html
nice soldering skill you got there lol
Thank you sir! :-)
th-cam.com/video/z8SVXHxCeW4/w-d-xo.html
Good but how i will uplode programme in it
Hi Ratnajit,
I have two tutorials showing how to program the ATMEL ATmega328p-pu chip.
(Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
(Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
شكرا جزيلا thank you very much
Hi Abd Al-Halim, thank you for your sweet words! Wish you all the best! :-)
How will u upload program in this
Hi,
I have two tutorials showing how to program the ATMEL ATmega328p-pu chip.
(Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
(Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
Hi, what's the difference between 328p and 328p-pu? Is pin mapping different?
Hi Mehmet, if you mean the dip package ICs then both are the same.
i can't get your component design.could you please put another site..........
Dear sir, you can reach the downloadable files from this link:
basseltech.com/watch?v=1r0--O7nvpQ
If you're having any troubles kindly contact me on my email: admin@basseltech.com or comment on the video.
Thanks!
where is the pushubutton to resect the arduino
أخي فيديو رائع, أريد أن أعرف ما إسم المحلول الدي وضعت فيه البوردة, لو سمحت الإسم بالعربي و الفرنسي وهل يوجد بديل له, سؤال ثاني ما هو دور الكحول الدي إستخدمتة لتنطيف البوردة , و أخيرا هل البوردة قابلة للتعديل كمثال - منظم الجهد- , -مدخل يو أس بي - , أخي بارك الله فيك على ماتقدمه في قناتك شكرا
th-cam.com/video/Qt-P9uVAYGs/w-d-xo.html
اسم المحلول: كلوريد الحديديك. إستخدام الكحول كان لتنظيف البوردة وإزالة الحبر الناتج من عملية النقل الحراري للحبر من الورقة إلي البوردة. أما بخصوص النقطة الأخيرة فمن الممكن تعديل البوردة كما تشاء يمكنك تحميل النموذج المستخدم من الرابط في صندوق الوصف وتعديله بإستخدام برنامج Eagle CAD. أتمني أكون أجبت عن جميع أسئلتك، وتقدر تتواصل معي في أي وقت عن طريق البريد الالكتروني: admin@basseltech.com
Good day Sir,
can i have your connection in arduino to TTL?
One way is to program the ATmega328p using USB to TTL, kindly check my video (How to Program ATmega328p Using USB to TTL?):
th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Thanks! :-)
th-cam.com/video/z8SVXHxCeW4/w-d-xo.html
Circuit diagram cannot open
what does this code mean ( w10647Asz113 ) ???? i read it on a pcb board under the ATMEGA328P-PU
+husamhsuam Can you please specify at which time did you see this?
I'm troubling in boatloading process..
Can you please help me
Dear sir, I currently don’t have a tutorial on burning bootloaders. But I recommend you to watch this video: th-cam.com/video/g90xb0nNX50/w-d-xo.html
Thanks. And I apologize for my late reply. Have a great day! :-)
th-cam.com/video/z8SVXHxCeW4/w-d-xo.html
What is the max voltage of the board
+Pius NDUKWU This board operates with maximum voltage of 5V. :-)
u r cleaning or making
hello, is this a diy arduino uno?
Which software do you use to design the pcb
+The Genius Guy I use Eagle CAD software, link: www.autodesk.com/products/eagle/overview
BasselTech thank you so much
You're welcome sir! :-)
i m not an enginer but I uderstud little I will try . but what after that pcb any progrme
Hi Arya,
I have two tutorials showing how to program the ATMEL ATmega328p-pu chip.
(Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
(Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
hyee how to burn bootloader using this board
Who to upload program to this board ?????
Hi Shakil,
I have two tutorials showing how to program the ATMEL ATmega328p-pu chip.
(Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
(Programming ATmega328p Using Arduino UNO): th-cam.com/video/EoHD0m3uUhA/w-d-xo.html
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
يتعذر التعليق علىىهذا الفيديو لا أعلم .
can we print the pdf on a4 sheet
Yes sir, as long as it's a thermal transfer paper or a photo glossy paper.
Normal paper won't work. :-)
Which place usb port connect
Kya app mujhe bata sakte hai ki pure kam kitns kharcha aya apko plz reply reply
May you please ask your question in English? Thanks!
Plzz tell me where do I get the single fibre cu board
You can get it from any electronics components re-seller or online from websites like ebay:
www.ebay.com/itm/10pcs-One-Side-Copper-Clad-50x70x1-5mm-Single-PCB-Board-Glass-Fiber-5-7cm-/332341695287?epid=1231417471&hash=item4d611bd337:g:igAAAOSwk6pZgEur
@@BasselTech th-cam.com/video/z8SVXHxCeW4/w-d-xo.html
How much money required for this work
It’s around 3~5 USD.
please give me circuit diagram with components name
Kindly visit our blog post for this tutorial: basseltech.com/watch?v=1r0--O7nvpQ
To view the eagle CAD project (schematic and board), you'll need to download for free EAGLE software: www.autodesk.com/products/eagle/overview
please give me circuit diagram with components name
Thanks....
You're welcome! :-)
thanx for give me circuit diagram
+shiv kushwaha You're welcome sir :-)
Can you send me the circuit diagram please?
Sir please send CAD drawings
Hi Sabir, kindly check this link:
basseltech.com/watch?v=1r0--O7nvpQ
How to burn bootloder
On it
You can use a usb ttl to burn bootloader and to upload program to ic
Plz give circuit diagram gram
There is no safety as Arduino as no regulator IC or icsp ka pins and Arduino board consist of surface mount chip there is nothing like this in this
Thank you for your comment. Well, here I'm supplying a regulated 5V power to the board. Not all Arduino boards have surface mount chip; the Arduino Uno, for example, has a dip package chip. This video is considered as a simple cheap clone to Arduino Uno. Have a great day, and I apologize for my late reply! :-)
how to program it tell
Kindly check my video (How to Program ATmega328p Using USB to TTL?):
th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Thanks! :-)
No pin for programming
Bro I want to buy some how much cost ?
Hi Praful, are you asking about the components’ cost?
I don't think u should say it as Arduino
Where is the reset switch ???
There is no on-board reset switch in this design, however, you can implement an external reset switch.
sir
please provide me circuit diagram and component list. How can we program this arduino without TTL please modify this circuit and design new one from wich we could program our arduino without another circuit. please sir reply me design another circuit with all connection like usb as sama as original arduino........ waiting for our response email me........
The link to the schematic and board design is in the description of the video. Thanks!
nice
Thank you! :-)
Where is voltage regulator
The voltage supplied to this board design is driven from a regulated 5v power source. So I didn't need a regulator.
Naic
How do u program it????????
Kindly check my video (Programming ATmega328p Using USB to TTL): th-cam.com/video/tiETAwkxnmw/w-d-xo.html
give me pcb gaber file please
I want digram
sir please give me circuit diagram and components names
sir this Link is not opened this error is find ( Error establishing a database connection )
sir please send circuit diagram and components names.
send CAD file
Hi Techno Vision,
Kindly follow the link in the video description and you'll find all what you need!
If you still have any doubts, feel free to contact me.
Have a nice day! :-)
Email: admin@basseltech.com
Kik: kik.me/basseltech/
Hmmm wow
diptrace pcb disaining video (am not cliyer plees help[
you stady to video
I am sorry, I can’t understand you. May you please rephrase?
plees help diptrace pcb disaining
Filenya tidak bisa didownload apa anda bisa mengirimnya ke saya
Tolong jawab
Sorry I can't understand, may you write in English?
Thanks!
BasselTech the file can not be downloaded, can you send the file to me
Yes sure. May you please send me an email at: admin@basseltech.com ?
Thanks! :-)
ماهي القطع المستخدمة
برجاء زيارة الرابط الموضح في صندوق الوصف الخاص بالفديو.
إذا كنت تواجه أي مشكلة، يمكنك التواصل معي عبر تطبيق kik أو عن طريق ال Email.
Email: admin@basseltech.com
Kik: kik.me/basseltech
Do you appreciate this comment?
Of course, I appreciate every comment, and reply to every single one of them.
Have a nice day, Drew! :-)
@@BasselTech now that's dedication, keep up the good work!
Thank you bro! Enjoy your day! :-)
شكرا
Sir what is diameter ?
Because ic mounting problem is created
Plzz help what is size of that Circuit
Hi Sabir, you're asking about the diameter of what exactly?
Photo paper per KY design ka diameter
pcb ka diameter
11:45 what is this music
Link to the music video: th-cam.com/video/g2HzEvU1roY/w-d-xo.html
thanks
Cara vc e muito ruim pra soldar hemmm?
Circuit diagram and pcb layouts please give me sir
It's not working
What exactly is not working?
female adapter was not working
@@msl6417 is it working now? Was it a soldering problem?
@@BasselTech can you give your gmail id because I want to ask some problem
@@msl6417 Please feel free to email me at: admin@basseltech.com
Or.........get it printed in China for $2.
Muy bueno una solucion muy practica, saludos y mucho exito. Tal vez quieras visitar mi página, tengo alguas experiencias interesantes que te pueden gustar, por ahora está in ingles. Saludos desde santiago de chile. www.thebytespace.cl o puedes seguirme en instagram instagram.com/thebytespace/
Sir plz send me CAD drawings
Hi Sabir, please follow the link in the video description. Thanks!
Sir pcb per design nhii aarhaa
Iron processing my problem aarhii hyy.
Plz help me
@@BasselTech sir photo paper ki process nhii Ho rhii maynyy iron ki process 1hr Krii but pcb per design nhii aachaa sir plzz help mi
Soldering is very bad!
MusicSucks!!!
Send me a print of design in pdf form plz plz plz I like your design plz send me I request you 🙏
Please follow the link in the description. If you're having any issues, please email me: admin@basseltech.com
Thank you!
so much hassle to save $2
But at least now you know how to make it yourself at home! :-)
True. :) but i don't think I will ever want to save $2
serial port ?? and 5v voltage regulator??
+Debojyoti Ghosh It's using USB to TTL technology not the serial port itself. :-)
Can you give
me the circuit diagram? Please
You can find the diagram on my blog:
basseltech.com/watch?v=1r0--O7nvpQ
And how i programm it
One way is to program the ATmega328p using USB to TTL, kindly check my video (How to Program ATmega328p Using USB to TTL?):
th-cam.com/video/tiETAwkxnmw/w-d-xo.html
Thanks! :-)
you can programme it with arduino droid app