I can clearly see how much love and detail you put into this recording and edition. You deserve many more followers, subscribing for support, great job!!!
This is down to your personal preferences. There are many posts online i.e. reddit, where people got responses from NVIDIA saying that it won't void the warranty unless they can prove that you damaged the card. In the event of an RMA or Repair during the warranty period, they want you to put the stock cooler back before sending it back to them. However, you can contact NVIDIA support directly to be on the safe side.
@@d7logic thanks buddy! How is the torque on this one? I read that the ones powered with alkaline batteries have low torque and this one seems to be Lithium battery.
Various Tool Kit - i.e. 117 in 1 Magnetic Precision Screwdriver Set and Acenix Opening Pry Tool. You can find these on eBay. The electric screw driver is from Amazon called "wowstick Precision Electric Screwdriver" - www.amazon.co.uk/gp/product/B07JHZK9RW
@@d7logic Thank you sir. This is a great video, although I have one suggestion you should have emphasized a higher degree of accuracy when you take off the leaf spring. How it popped quite dramatically seems like something could be damaged if you don’t drive them completely out by hand very slowly until it pops then slowly take it them off. I was honestly quite shocked.
@@Bertis87 Thank you for your suggestion. I agree it may look like that, but please be assured that I removed the 4 screws in cross-pattern very slowly to ensure the spring doesn't pop off with force. The last screw was simply stuck and the video is fast forwarded. But you are absolutely right, taking off the leaf spring requires a higher degree of accuracy to avoid possible damages. Glad you pointed that out.
Hey, once you get everything hooked up, does the top of the gpu lightup? Like the 4 square by the Corsair Logo and where it says Geforce RTX? Thanks man!
Hi, I just checked and no it doesn't light up. Seems like there aren't independent LEDs on the 4 squares. The light comes slightly through the main water block - it's stronger on the left side than on the right. I did not notice that since I have the GPU mounted vertically.
@@d7logic Same thing here, just wanted to make sure mine wasn't defective. Kind of looks like it is the same independent LEDs as the Dominator RAM. KK Thanks for the info! I loved you install video!
Thos video is fantastic, very clean and well done. I'm really surprised it doesn't have more views. I really appreciate it as a reference
Thank you for the teardown. You helped relieve a lot of anxiety for me when I go to swap my FE into a water block
Thank you - Glad to hear this video helped you :)
I can clearly see how much love and detail you put into this recording and edition. You deserve many more followers, subscribing for support, great job!!!
Thank you!
Great video. It made things so easy. I had no idea how to break down this card until I watched this
Dude what an amazing, high quality video, thank you!
This
Great video dude, this will help me a lot with my build! 👍👍👍
Wondering if is worth it voiding warranty by water cooling the GPU.
This is down to your personal preferences. There are many posts online i.e. reddit, where people got responses from NVIDIA saying that it won't void the warranty unless they can prove that you damaged the card. In the event of an RMA or Repair during the warranty period, they want you to put the stock cooler back before sending it back to them. However, you can contact NVIDIA support directly to be on the safe side.
Great video! Helped me put together an RTX 4080 FE together easily!!
Thank you, glad to hear that :)
Hi what did you hook the rgb cables up to?
@@deeezuz I haven’t been able to connect the RGB’s yet. Still trying to figure that out
What are temps like with how many radiators?
2 Radiators: 1x 360mm, 1x 420mm
Watch our RTX 4090 Upgrade Video - th-cam.com/video/4njGOi55Wzk/w-d-xo.html
IDLE -
GPU: 29-33 °C (Stock Clock, non-OC)
CPU: 34-39 °C
Coolant: 29-33 °C
GAMING (Shadow of the Tomb Raider, Cyberpunk 2077, AC Valhalla) -
GPU: 47-52 °C (Stock Clock, non-OC)
CPU: 64-67 °C
Coolant: 37-39 °C
BENCHMARK (Furmark) -
GPU: 57-59 °C (Stock Clock, non-OC)
GPU Hot Spot: 69 °C
GPU Memory: 50 °C
GPU Power: 434 Watts
Coolant: 40-42 °C
@@d7logic Not bad, pretty much the same as my overpriced EK 3090 blocks for a Strix 3090 running at similar TDP.
@D7Logic what is the electric mini screwdriver?
This one here: wowstick Precision Electric Screwdriver - www.amazon.co.uk/gp/product/B07JHZK9RW
@@d7logic thanks buddy! How is the torque on this one? I read that the ones powered with alkaline batteries have low torque and this one seems to be Lithium battery.
@@fernanzgz You sometimes have to twist it manually but that's not a big problem. I use this daily for laptop repairs and would highly recommend it.
Thanks for this guide!
Tool kit? That you use for dissasemble?
Various Tool Kit - i.e. 117 in 1 Magnetic Precision Screwdriver Set and Acenix Opening Pry Tool. You can find these on eBay.
The electric screw driver is from Amazon called "wowstick Precision Electric Screwdriver" - www.amazon.co.uk/gp/product/B07JHZK9RW
@@d7logic thanks bro
Amazing video angle and everything 😊
Thank you :)
Great video. thank you.
Nice video!
Thank you :)
Hey what electric screwdriver and what kit is the one your using in this video ???
It's the wowstick Precision Electric Screwdriver - www.amazon.co.uk/gp/product/B07JHZK9RW
@@d7logic Thank you sir. This is a great video, although I have one suggestion you should have emphasized a higher degree of accuracy when you take off the leaf spring. How it popped quite dramatically seems like something could be damaged if you don’t drive them completely out by hand very slowly until it pops then slowly take it them off. I was honestly quite shocked.
@@Bertis87 Thank you for your suggestion. I agree it may look like that, but please be assured that I removed the 4 screws in cross-pattern very slowly to ensure the spring doesn't pop off with force. The last screw was simply stuck and the video is fast forwarded. But you are absolutely right, taking off the leaf spring requires a higher degree of accuracy to avoid possible damages. Glad you pointed that out.
@@d7logicdo you have a reassembly video? I need to put it back into the graphics card now
@@Bertis87 Unfortunately not, sorry.
Hey, once you get everything hooked up, does the top of the gpu lightup? Like the 4 square by the Corsair Logo and where it says Geforce RTX? Thanks man!
Hi, I just checked and no it doesn't light up. Seems like there aren't independent LEDs on the 4 squares. The light comes slightly through the main water block - it's stronger on the left side than on the right. I did not notice that since I have the GPU mounted vertically.
@@d7logic Same thing here, just wanted to make sure mine wasn't defective. Kind of looks like it is the same independent LEDs as the Dominator RAM. KK Thanks for the info! I loved you install video!
@@MDog_FPV Thank you! Yes it's quite odd but I am glad you pointed that out, otherwise I would have thought the same, it being defective :)
very good
Thanks for the vid! Now make a video of you taking it apart and cleaning the fins, etc. the entire waterblock.
Запилы от фрезы зачетные, корсарам респект )))
I have this water block. I'm looking for the original Cooling fan kit for a Nvidia Founders Edition 3080 ti if anyone wants to trade?
Why?don't like the block?
4090 is dead now with the new 5080, very hard to sell it for more than 500$