Hi again, when you have taken the DB killer out, you said there is a small piece of metal that you can see in your video. Is this small piece of metal in the Titanium silencer part or is it in the round tube with all the holes in it, that you first install in the motorbike ? I look forward to your reply.
When you have taken the DB killer out, you said there is a small piece of metal that you can see in your video. Is this small piece of metal in the Titanium silencer part or is it in the round tube with all the holes in it, that you first install in the motorbike ? I look forward to your reply.
So how much louder would you say it is with the db killer in it? I really want to get one of these cause they look and sound so good but I work shift work so sometimes I'm leaving for work at 10pm and don't want to be loud as hell.
there are 2 db killers, one on the outside, and one between the line and the can. With both on, it's a little bit louder than stock, but it's acceptable. I personally removed the one inside, but didn't dare remove the one outside, because the noise was too loud
Hi there, when you take the end cap off / baffle out, can you look straight through the exhaust, it looks as if there is some thing in the centre on your exhaust ? Do you still have a smooth throttle and no flat spots in the fueling ? Look forward to your reply
Bonjour, il suffit d'enlever la vis six pans, ensuite j'ai pris une pince multiprise avec un torchon autour pour pas rayer puis plus qu'à tirer dessus .
Damirre 68 après avoir enlever la vis, j’ai beau tirer dessus comme un dingue ça ne sort pas. Je me demande s’ils n’ont pas changer la dispo des pots Pr éviter de se dechicaner 😓
@@vincentcollomb1131 fait faire chauffer un moment le pots et après tu tape sur la chicane avec un marteau et un chasse pour débloquer la chicane et après elle sort difficilement en tout ca dans mon cas wd40 ou autre lubrifiant ca n'a en rien aider
Awesome sound! I could not decide. I know now :)
Excelente video. Solo has cambiado el purito? La cola? o has tocado algo más
Bro does SC Project recommend remap with this SC1R? I am looking into SC1R and Scorpion RP1GP which doesn't require any remap as per them.
Hi again, when you have taken the DB killer out, you said there is a small piece of metal that you can see in your video. Is this small piece of metal in the Titanium silencer part or is it in the round tube with all the holes in it, that you first install in the motorbike ? I look forward to your reply.
When you have taken the DB killer out, you said there is a small piece of metal that you can see in your video. Is this small piece of metal in the Titanium silencer part or is it in the round tube with all the holes in it, that you first install in the motorbike ? I look forward to your reply.
Avec le DB killer c'est raisonnable , mais le S1R même avec le DB killer les oreilles saignent ! :)
Salut. Est-ce que tu as fais une cartographie et si oui laquelle ? J'avais le street r 675 avant avec carto arrow pour mon sc project. Merci
Salut, non aucune cartographie et la moto tourne nickel.
So how much louder would you say it is with the db killer in it? I really want to get one of these cause they look and sound so good but I work shift work so sometimes I'm leaving for work at 10pm and don't want to be loud as hell.
there are 2 db killers, one on the outside, and one between the line and the can. With both on, it's a little bit louder than stock, but it's acceptable. I personally removed the one inside, but didn't dare remove the one outside, because the noise was too loud
@@maxwell9999999 you basically sawed off the db killer that is attacthed to the link pipe right? Did it get a lot louder?
I dont see on the web of sc project that this exhaust comes with db killer do you know Why? Its euro 4?
Yes, it's a Euro 4 . It comes with the dB Killer .
Hi there, when you take the end cap off / baffle out, can you look straight through the exhaust, it looks as if there is some thing in the centre on your exhaust ? Do you still have a smooth throttle and no flat spots in the fueling ? Look forward to your reply
Yes, there is a small piece of metal in the bottom of the exhaust, but I have no hole in the acceleration. I am satisfied.
on ya la chicane sa fait cb mm 60 mm de entre non
Tu en es content de cet échappement ?
Niveau esthétique ça rend bien ?
Niveau sonore en roulant ça donne quoi?
Merci a toi
J'en suis très content, perso je trouve qu'il va super bien sur cette moto
T'as pas les oreilles qui sifflent apres un long trajet même avec la chicane?
Non le bruit est juste bien avec la chicane .
It’s the same Exhaust for 660cc?
ye i got it for my 660s, love it
Is it possible to remove the db killer?
Screw or Weld?
It's removed in the video. It looks like it screws in, and that's what someone else on another video said.
Yes you can remove the db killer, it is fixed with a screw.
Many Thanks
comment a tu fait pour enlever db killer ? je galère pour l enlever !!
Salut , si tu as trouvé comment faire je suis preneur. merci
Met un peut de wd40 autour de la chicane et ca viens tout seul
Bonsoir je viens de mettre se pot sur ma ST Rs également, comment as tu fais pr dechicaner stp j'ai énormément de mal a enlever la chicane ?
Bonjour, il suffit d'enlever la vis six pans, ensuite j'ai pris une pince multiprise avec un torchon autour pour pas rayer puis plus qu'à tirer dessus .
Damirre 68 après avoir enlever la vis, j’ai beau tirer dessus comme un dingue ça ne sort pas. Je me demande s’ils n’ont pas changer la dispo des pots Pr éviter de se dechicaner 😓
@@richardloureiro934 j'ai le meme probleme mais sur un z650 😓
Wd40 autour de la chicane et ca viens tout seul
@@vincentcollomb1131 fait faire chauffer un moment le pots et après tu tape sur la chicane avec un marteau et un chasse pour débloquer la chicane et après elle sort difficilement en tout ca dans mon cas wd40 ou autre lubrifiant ca n'a en rien aider