WING & P16 - How to use Ultranet through AES50 - Quick WING Tips
ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2023
- #Behringer #Ultranet #P16
Join this channel to get access to perks:
/ @guillaumelortie
To support the channel please become a Member or a Super Member or Paypal : paypal.me/GLortie
Email : info@guillaumelortie.com
Main Gear List and amazon.ca affiliate links : amz.run/6ahU
Behringer WING : amz.run/6ah9
Midas DL 251 #Stagebox : amz.run/6ahB
my live microphone : amz.run/6ahD
In-Ear Monitor : amz.run/6ahE
Headphones : amz.run/6ahF
Audio Interface : amz.run/6ahJ
#StageConnect #DP48 #Live #studio #IEM #monitor #stagebox #inearmonitors #midas #audio #AES50 #P16M - เพลง
Excelente video!!!
Hi Guillaume, love the channel, love my wing! Just a point for clarification. The tap point for the Ultranet feed is between the Gain and the Trim and is fixed. This means that once you have set the gain for a channel, and the rehearsal has begun, you can adjust the trim, without affecting the IEMs. Please correct me if this is not the case... In your video on Tap points you said that the tap point changes what is sent to monitors and in ears - this is only the case if you are feeding them from a bus and not using Ultranet. :)
Short but sweet
I have a similar problem, I have an MR18 table trying to connect to the P16M and the Ultranet signal doesn't arrive, I'm using the cable and even though it comes from Behringer, I ordered it but it doesn't work, I've already tested the P16M on an XR18 and it's working perfectly but my MR18 The ultranet signal doesn't come on, could you help me please? thanks !
Hi !!! We have a question about a connecting trouble we had, the p16m do not receive signal from aes50: There is 2 sd16 connected to the wing and 1 p16m it’s connected to one of them, but it do not have signal. There is something extra we have to do on the sd16..some to set it up??
Greetings from Colombia.
Hi 👋
I need to ask, did you connected the AES50 on the side and then connected the P16 on the top Ultranet ports?
Are you sure you send something into output 33-48 on the good AES50 port of the console?
@@GuillaumeLortie we connected the p16m to the sd16, and the sd16 to wing’s aes50 port
@@CURIOSOSAUDIOPRO it should work wort outputs 33-48
@@GuillaumeLortie we are going to try again. Thanks 🙏
Hit me up if anything
Hi, i am from INDIA, Plz tell me how to connect behringer xtouch to wing? For more faders. I have a x32, m32, xr18. This 3 console connect easily with xtouch.