12V UPS for router WiFi and Camera | UTsource

[@PhdHung]

This video has subtitles.

[@CR7n322]

Box size??

[@jeffersonsinoy2913]

Does it needs a BMS? or does the module has built-in overcharge and overdischarge protection ?

[@pinokio514]

I understand it is not quite a UPS. Is constant power of the router from batteries and they charge constantly? UPS is always running from electricity and switches to batteries only when electricity is turned off. This is the difference. But it is still useful - if there is no electricity to connect the router to this UPS (it will be more correct to call it powerbank) and there will be the Internet. I have long wanted to do this, thank you)

[@PhdHung]

It is UPS. the power from the adapter will charge the battery and supply the load, only when the power is off, the boost circuit will work.

[@pinokio514]

@@PhdHung it's change case =). But it is better to show with a multimeter.

[@rnbeat]

ihave this board actually it's a ups bro

[@shundhem_electrick]

amazing video

[@gurkanaytekin7752]

Good work

[@RixtronixLAB]

Creative video, thanks for sharing :)

[@adesuyisunday4287]

Hi, you are doing great. It's a beautiful project from you. Thanks. Please do you have open source stm sinewave inverter which have so many features like : menu buttons, LCD, charging battery?, etc

[@lord0ver]

I made a UPS just like this. Do you know what it means when the green LED flashes two, three or four times?

[@charliemenpedegloio3053]

Part number of the charge and boost module please?

[@gsupleo]

18650 Battery Charge Discharge Converter UPS Protection DC 9V 12V Charging Step Up Booster Module for Lithium Voltage

[@David_11111]

yay very cool

[@cartfredo4782]

sir does it charge the battery?

[@rahuanjalraaz1982]

In se bust kiya aur out se router load and battery charge kese kaha conect karke charge kare sir?

[@valtersouzaribeiroribeiro9534]

Bom dia parabens muito bom

[@Smartproducts_pk]

Hi Sir, I am a TH-camr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.

[@claudiocovaci6059]

Por favor dama un link para compare este charge bost module

[@huutinhnguyen8733]

Sử dụng pin laptop ok không bạn?

[@PhdHung]

ok mà

[@MarinhoSolarOffGrid]

Top parabéns

[@hadipinghan5805]

Pada sistem BMS Input output jadi satu apakah saat PLN mati arus dari baterai terbuang ke adaptor?

[@aliabbas3351]

I was made 18650 lithium battery 3.7v 2200mah with three batteries ups I put charger 12v with 1A but it's battery drain so fast like 10 mints work only ??

[@rakauwais987]

Mau tanya bang, semisal batre terkuras habis, kenapa ya saat pln nyala ga bisa nyala otomatis routernya? Harus cabut tancap baru bisa. Mohon bimbingan.. 🙏

[@MikeSilanin]

What about BMS?

[@Infinity-electronic]

No need BMS

[@ZahidAli-bo9jc]

Kia ye 9v Kay rautor ko Chala skta hai

[@MsWs-kh8zo]

Bang pake batre 21700 apa bisa ?

[@CR7n322]

Why u dont use a switch??

[@AbidAhmed-Pranto]

i need 2 output 9v and 12v. can i get 2 output on this board ?

[@SYED_VAI]

No use tow modiul,

[@ltd2807]

Router onu ak sate colbe??

[@luaanfx]

Please, how to convert 110V ac to 30V dc 10A
It will be useful for an 30v power supply

[@KPNShortVideos]

Adaptors easily available. But 10A is high

[@michellsantossbd139]

Nice

[@rahuanjalraaz1982]

battery charge kese kare sir?

[@electronic7979]

👍

[@JAMEsAMTECHCHANNEL]

tamsak mster

[@sadayaupdate2597]

Untuk cctv knoa gk bisa ya

[@nnboknoy6118]

How many hours working ?

[@Infinity-electronic]

Depending on your battery mAh and power consuming of wifi router or CCTV

[@forhadhossain7933]

HOW
USE 9 VOLT AND 12 VOLT ANU AND ROUTER

[@pb11u9859]

PRICE

[@g7mks383]

No circuit diagram or battery BMS

[@digital210921]

How much backup time for WiFi router?

[@PhdHung]

5-6h bro

[@Analyzer82]

From where did u buy that plastic box? link pls.

[@83Crackerman]

name of modulo

[@haiidol4301]

anh ơi làm mạch mppt 60a đi ạ

[@aayanafridi9860]

ভাই ১২ ভোল্ট এর অনুতে জদি ১২.৯৫ ভোল্ট ইনপুট দেই তাহলে কী কোন সমস্যা হবে অনুতে

[@himeltfr]

কোন সমস্যা নেই।

[@jazasleman2479]

Sir pleas do 120vdc to 12vdc 3amps buck converter

[@poli4926]

0.2 thôi anh

[@mianwaleed6547]

Location

[@quanghoang04]

👍👍

[@myathtwe1221]

5v.. IMOU cameraအတွက်ဘယ်လိုလုပ်ရလဲ..

[@aamiaudios2125]

First

[@tiffyck8401]

มันทำไรได้

[@Smartproducts_pk]

Hi Sir, I am a TH-camr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.

[@forhadhossain7933]

HOW
USE 9 VOLT AND 12 VOLT ANU AND ROUTER

[@tariq_9094]

Use 7809 mosfet

[@Smartproducts_pk]

Hi Sir, I am a TH-camr of an Electronics Chanel. Sir I have PWM Charge Controller its load Automatically Turned off after 24 hour daily But When I put on this 00 after 24 hour it was not turn the load On by automatically.
Please Tell how can i Use Continue load by Changing internal software or put out its Timer option from Controller.