ขนาดวิดีโอ: 1280 X 720853 X 480640 X 360
แสดงแผงควบคุมโปรแกรมเล่น
เล่นอัตโนมัติ
เล่นใหม่
I used 1" and I am 100% happy with the fitment.
The spacers helped out a lot. Looks good 👍👍
Thnks for this video question: what is the offset ET form the back wheel ....thnks
Looks good ,Hey where you get these and would they fit a 2005 C6. Thanks
I found them on eBay, generic Chevrolet 5 lug axle spacers, they should work for C6, Corvettes and beyond, as well as pickup trucks lol
I won't have to worry about the protruding lug nut issue if I use these with C6 wheels? I'm new to spacers.
No issues with this setup
Either your center bore is different or they stopped making it cause I got the ones that were 66.9mm and they didn't sit flush. @@4KMotoring
Hi, just wanted to know if you are still using the spacer and if have you had any issues. I'm getting ready to do the same for my 02. Thanks!
Still running strong. Tight hubcentric fit, no issues
Were the rims installed without any problems or friction in the fenders?
No problems at all!
What's the torque spec when installing the tire??
Between 90 and 100 foot lb according to most of the literature
Any chance you can share the ebay link or seller for these spacers?
www.ebay.com/itm/161973670572?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SosrAXuGSsO&sssrc=2349624&ssuid=aAaGtBwOSrm&var=&widget_ver=artemis&media=COPY
@@4KMotoring link not found. can u post a new one?
What’s the size of the rear and fronts ?
Wheels or spacers?
@@4KMotoring wheels lol sorry I should’ve been more specific
Lol the C6 base rims are: front 18x8.5 +56mm offset- rear 19x10 +79mm
@@4KMotoring gotcha looks like I’ve got the same rims ! Did you have to do anything to the fronts or did they fit just fine ?
Fronts were about perfect. The rears just tucked in a little too far for my liking. A 3/4 in spacer would probably be about perfect
I got a front and back set from a friend and didn't like them, I got a weird vibration from the wheels, took them off and it stopped, now I only put something on that will help performance not looks Great video
Did you get a set that wasn't hub centric?
@@4KMotoring my friend took them off from his C5 , he got them at our Chevrolet dealership new! Hope you have better luck than I did
Nice vette
Thanks!
and who needs jackstands anyway?
I'm willing to take my chances if I'm only removing one wheel and not getting under the car
What's with the Pac-Man Music ?
Early attempts at video editing
sry i read it already..Good luck
I used 1" and I am 100% happy with the fitment.
The spacers helped out a lot. Looks good 👍👍
Thnks for this video question: what is the offset ET form the back wheel ....thnks
Looks good ,Hey where you get these and would they fit a 2005 C6. Thanks
I found them on eBay, generic Chevrolet 5 lug axle spacers, they should work for C6, Corvettes and beyond, as well as pickup trucks lol
I won't have to worry about the protruding lug nut issue if I use these with C6 wheels? I'm new to spacers.
No issues with this setup
Either your center bore is different or they stopped making it cause I got the ones that were 66.9mm and they didn't sit flush. @@4KMotoring
Hi, just wanted to know if you are still using the spacer and if have you had any issues. I'm getting ready to do the same for my 02. Thanks!
Still running strong. Tight hubcentric fit, no issues
Were the rims installed without any problems or friction in the fenders?
No problems at all!
What's the torque spec when installing the tire??
Between 90 and 100 foot lb according to most of the literature
Any chance you can share the ebay link or seller for these spacers?
www.ebay.com/itm/161973670572?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SosrAXuGSsO&sssrc=2349624&ssuid=aAaGtBwOSrm&var=&widget_ver=artemis&media=COPY
@@4KMotoring link not found. can u post a new one?
What’s the size of the rear and fronts ?
Wheels or spacers?
@@4KMotoring wheels lol sorry I should’ve been more specific
Lol the C6 base rims are: front 18x8.5 +56mm offset- rear 19x10 +79mm
@@4KMotoring gotcha looks like I’ve got the same rims ! Did you have to do anything to the fronts or did they fit just fine ?
Fronts were about perfect. The rears just tucked in a little too far for my liking. A 3/4 in spacer would probably be about perfect
I got a front and back set from a friend and didn't like them, I got a weird vibration from the wheels, took them off and it stopped, now I only put something on that will help performance not looks
Great video
Did you get a set that wasn't hub centric?
@@4KMotoring my friend took them off from his C5 , he got them at our Chevrolet dealership new!
Hope you have better luck than I did
Nice vette
Thanks!
and who needs jackstands anyway?
I'm willing to take my chances if I'm only removing one wheel and not getting under the car
What's with the Pac-Man Music ?
Early attempts at video editing
sry i read it already..Good luck