How to build a Cheap DIY Vacuum Chamber
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- In this video I show how to build your own super cheap DIY vacuum chamber. You need just a glass jar for food canning, a lid, a piece of plastic tube, hot melt glue and some hose. Combined with a vacuum pump, this homemade vacuum chamber allows for a lot of interesting experiments. You can also add a vacuum gauge to indicate the level of vacuum. I connected the vacuum gauge using a "T" splitter from a broken blood pressure meter.
You can support me on Patreon:
/ diodegonewild
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
I could listen to this man speak all day 😌😴
Lilboh Beat 😂😂😂😂😂
me too lol
I hated his voice it drove me to cut the video short, his idea here is very dangerous someone is going to get hurt bad! 😞
it's pumpingggggggggggggggg.. even more saaaaAAAAaalt!!!
Omfg Lolololol 👍
Whole room is vibratiiiiing...
Hmm, this might be useful for degassing of silicone. It's important to get the bubbles out before casting.
It can also be used to degas epoxy for composite construction. Mixing the epoxy invariably adds a tons of bubbles, which then become trapped between layers of fiber when used, weakening the build.
that vacuum gauge looks like a stimpak from fallout 4
I have no idea what fallout 4 is but I googled images for stimpak and it really looks similar :).
nice pattern of baloons at the end! thanks for the tricks!
You baloon torturer :D
That is such a pleasing effect, i really like your use of ordinary items in your experements, the old compressor is the only special item, but not hard to find one.
The tubing and connectors could also be found at a tropical fish shop.
Expansion and compression of gasses, i imagine the density of the gas would also make a difference.
Very nice Video! But I would not use glas for a vacuum chamber :) But you are DiodeGoneWild so it is okay :P
Nice. I use car tire valve which has nut tightening. I have an old compressor from vintage 2” video tape recorder where you had to make vacuum which sucked the tape against the head drum guide.
Next level
10/10 accent would watch again.
He sounds like Arnold Schwarzenegger had a kid with Borat's Mother!
Most commercial containers are built to resist internal pressures pressing outward not opposing forces. They are excellent at designed function ie can bottle soda champagne outward inward pull. Please use a shield or plastic coated glassware steel vacuum pressure designed or pipes. Good on you to be curious, same and been injured not from this. 👍🏻
That was really interesting to watch ,I need a small vacume chamber to treat the cracks in my gems ,but can't afford to buy an extensive chamber ,I need enough pressure to help force resin intovthe cracks in gemstone s ,thank you. Brian 🙏
Could you do a comparison of the pump and home pasteurization vacuum?
Pump from an old fridge. :D
If you wrap the jar with clear tape like cellotape or any clear packing type tape it would be much safer in the event of an implosion. I have seen it doneand there was very little if any escaped glass. :) Al
That's really nice!
Maybe wrap clear vinyl tape around the jar, to stop shrapnel, should it implode? I've seen bell jars a bit thinner, so I know you were adding to the excitement.. OK, back to electronics!
It's probably as good a vacuum as needed to degas resins and silicone when casting, so they don't form bubbles and make a good surface.
What other uses for it are there? How about upgrading the ZD-211 desoldering iron into an automatic one?
Could the same compressor be used for airbrushing? Not sure how much airflow it needs, probably not all that much. Or does it not have that much of an intended duty cycle? Would be nice to have one compact silent compressor that you can use for all kinds of light workshop tasks, electronics projects related, cosplay and decoration, arts and crafts related etc, not one of these bulky loud units from home improvement store.
These days i no longer collect useful little plastic bits, i 3D print them, and since it only costs less than 20€/kg, i can just throw them away when not needed, keeps my home so much neater. But that's an aside.
yes, you only needs 15 bar i think it was to degas silicone but lower helps heaps
also for spraypaintign it might not be good, as it also outputs oil , and you dont want the oil mixed into paint XD
I put 3 in tandem all pressurizing an 11 gallon tank with pneumatic electric cut off solenoids, an over pressure pop off valve, in tank check valve with a release to relieve head pressure in the lines when the solenoid reaches set pressure of 130psi and the 3 pumps takes about 3 mins to reach that.. super quiet and good for small shop use.. airbrushing or painting with em you need a desiccant filter and oil/water separator before the gun and need to change out the pag oil in the compressor cuz it contains freon and other junk that can react and form some very powerful acids ad pag oil is hygrophobic so change to hydraulic or compressor oil and keep eye on the oil separator to see how much it will spit out so can refill with same as they’re built to push a little oil through the closed refrigerator system to lube stuff.. but that said theyve been working great for years.. recently got an a/c unit 240v hermetic and that booger is faster than the 3 combined so would like to try a vac test with it... be interesting..
A poor man vacuum chamber??
I don't agree, it's more like "super genius, cretive man vacuum chamber"
"still no implosioooooon..." *touches glass that may implode in hand*
Lol
It's funny because I was peeking through my fingers over here when he did that XD
Nice! There are other youtubers that buy a vacuum pump for like $1000 and still can't say anything interesting about it.
Also, já chci další video, už mám ten tvůj kanál celej dokoukanej :)
You can also use gas pipes with gas splitter
LOL! The next great singing artist...but smarter!
Vacuum food jars and pumps made for it only do about -20" mercury.
Good Video Now I Can Make Marshmellows explode. Can you please give us a link or info to where we can buy this stuff. :) Thank you if you are reading this comment :)
You are highly intelligent, right? I'm >99,5 ref group German students I like it to see your videos.
cool vacuumcamberrrrrrrrrr
Disappointed, I thought you gonna show us some nice looking discharges. I saw it on your site :)
Discharges may be still coming :).
Amazing
you are messering from 1 you are ment to start from 0 just a minor error anyways nice work! this is very intresting
Do one with various fluids. water, alcohol...
Glasses gloves leaves and logs?? This fall ill be Goodn prepped..
The comedy show I didn't know I was about to watch. So I need to get a all these random items and hope not to have it shatter!?!?!?! Since you have put so much time and effort into making this bomb why not wrap all the glass with duck tape since you have pieced it together will everything but duck tape... BAD IDEA HERE FOLKS!!!!!!!
Nice Video !!
Second !
Ahah! An experiment I can show my kid :)
cool
I'm asking for a friend, can this be used to enlarge a penis and also, how many millibars would you recommend per centimeter?☺
There are vacuum devices for men with erectile dysfunction. I believe that one uses a not-too-tight elastic band to maintain the erection.
Probably less popular now what with Viagra and so on.
especially when its the first lady .......oops i mean boy. god bless america
Hah! The balloon was as accurate as your pressure gauge.
It looks like something MacGyver has made.
We know that outside air is pushing on our bodies and objects. But where is that extra air inside baloon coming from ?
There is no extra air. It's the same amount. The apparent size of the balloon is a balance between the exterior air pressure and the interior air pressure.
Grumpy OldMan so to find out how much air is inside the balloon we need full vaccum ? Im not 100% sure
What if you parallel the two compressors?
IscleGaming | ZefaCraft how do you think the full bridge rectifier was made😂😂
You would still get the same end resulting pressure, but you would get there quicker.
Some high voltage? With low current of course
Prosím ukaž taky nějaký tvoje výtvory
Spoiler alert: it does not implode!
Great experiment!
I have friends that claims rockets won't work in space/vacuum since there is nothing to push against.
So I did a test:
th-cam.com/video/BZGluOB-TJw/w-d-xo.html
Would be fun to see if you can ignite a tiny rocket in your chamber to see if the pressure changes and goes back to the same vacuum after the burn.
Thanks for great videos!
Every action has an equal and opposite reaction, or something like that.
Vacuum has nothing to do with rockets working, Newton's 3rd law always works, rockets don't need anything to push against, your friends are idiots.
in a vacuum it is impossible to light fire but nasa uses a special trick that makes the fire ignite with a little bit of pressure
Nope, if the chemicals in the 'rocket' have enough oxygen present there will be a reaction-an expansion of gasses, so that reaction converts into physical motion.
FRIST
I hope it is not gonna imploooooooooooooooooooodeeeeee
MAMMA MIAAAAAAAAAAAAAAAAAAAAAAAAAAA
Whoops
test some water or alcohol
Ta česká angličtina se nedá poslouchat 😁
04:57 - About 65 mm, not 70.
what's wrong with his accent
Nothing.
thicc
Diode Gone Wild Will Pin My Comment?????
This is fake. The motor from a blood preasure meter is not enough powerfull for this kind of purpose. Hes not even showing the motor.
What?????