I use two 4 1/2 grinders older Dewalt model to take 5" cutting and hard disk then the other grinder had a heavy duty wire wheel permanently. But I always have two 4 1/2 grinders because the 4 1/2 can take a 5" disk and can be used with one hand. Iv had my high pressure pipe tickets for 15 years and welding for 25 years and still love it.
Excellent information as always, totally concur on the Miller respirator fitting perfectly under the hood. Protecting your lungs is about as high a priority as it gets. I wear mine when grinding knives as well.
in Lincoln for a air vantage 600 the manual stated for pulse welding needs 4/0 cable and a combine length of no more then 60 ft. . i should have stated in early post.
Safety equipment safety glasses and a respirator from miller or 3m highly highly recommended protect your lungs 🫁 and eyes you don’t wanna breath that stuff
Thanks I got those knee pads, feel like the bionic man. Good one on those slots in the hood I'll work on that tomorrow. I use a 20$ jackson head gear in that fiber metal hood. 👍
Excellent. Thanks for posting. All useful info. I know your intention was to cut down on questions, but I've had an equipment question for a while now and this seems like the place to post it. I'm basically happy with all my safety equipment with one exception: my helmet. Helmet works great except that ambient light, sunlight, ceiling lights often shine in from the rear and produce glare on the inside of the lens. Sometimes, it's REALLY annoying. For this reason, I've been thinking about a pancake because it eliminates that problem. But I see that you use a conventionally shaped helmet and you work outdoors in the sun. What am I missing here? Any suggestions or thoughts?
One option for a lightweight flipup lense, is the lense fitted to a "Protoshell standard" lid, sold in the UK, not sure about that side of the pond? Not all that good as a shield tbh as made from some sort of fibre that doesnt like getting wet. But the flipup cartridge to hold the lenses is great. Fitted one into a pipeliner years ago, for squeezing in and around tight spools and heating coils. Still use it today
what's you're auto lens? I use a Jackson journeyman adjustable 9-13. 2×4 1/4 really clear.My older one has a bluish tint that you can't find in any auto lens out there.I also use Phillips safety Gold lenses with magnetta insert for fixed by far the best viewing clarity in my opinion after 26 years.Give it a shot.Regards Augie
Hey what's up brother it's Augie.I have the same thing and I love those gloves!! I personally wear the Roscoe FR Shirts they are awesome.I'll try the bibs. later Augie
Excellent welding because it’s my passion good morning my schools Times thes morning am just working real hard to get my dreams 📝📝🥽🌎🐕🐕📝📝📝📝📝🌎🌎🇨🇦🇨🇦🐕🐕🥽🥽🇺🇸🇺🇸📌📌🐕🐕🏃🏻♂️🙃
@@xAZAZELx13 ya something in my spirit doesn't trust any of these shots. And for something so deadly we gotta test to see if we have it?. I believe Jesus is coming back very soon and is not happy with all this stuff going on. Stay healthy and don't do anything for any price that may cost you. To bad they never came up with real medicine for cancer. They just wanna see what they can get away with . Pretty soon the rubber band is gonna snap
I use two 4 1/2 grinders older Dewalt model to take 5" cutting and hard disk then the other grinder had a heavy duty wire wheel permanently. But I always have two 4 1/2 grinders because the 4 1/2 can take a 5" disk and can be used with one hand. Iv had my high pressure pipe tickets for 15 years and welding for 25 years and still love it.
Your choices are on the mark Dude, put a tire patch on your boots !!!!
I'm not going to be any pipeline welding but having the best equipment to avoid injury as a hobbyist is important too. Thanks for making this video.
are you use the pipeliner hood ont your hard hat ? thats not the same size to the tiger hoog .maybe fit the pipeliner hood with the speedy loop?
Do you mount your hoods to your hard hat? If so, how do you mount them?
Been watching your videos for years...by far the best on this one... thanks... Florida Paul
Great vid! You should do a walk around of the welding rig
A sugar scoop and grinder must have a grinder is a must have weapon in your arsenal
Excellent information as always, totally concur on the Miller respirator fitting perfectly under the hood. Protecting your lungs is about as high a priority as it gets. I wear mine when grinding knives as well.
Nice insight. It's always interesting to see the different gear that people use.
in Lincoln for a air vantage 600 the manual stated for pulse welding needs 4/0 cable and a combine length of no more then 60 ft. . i should have stated in early post.
stick also
Safety equipment safety glasses and a respirator from miller or 3m highly highly recommended protect your lungs 🫁 and eyes you don’t wanna breath that stuff
I went and got the Dunlop’s because of this video, going pipelining Up in vanderhoof BC in mid November. Hopefully they are the cats ass!
Thanks I got those knee pads, feel like the bionic man. Good one on those slots in the hood I'll work on that tomorrow. I use a 20$ jackson head gear in that fiber metal hood. 👍
Where can I find the scarfs that welders use to keep from not burning up their neck
Здравствуй ,хорошие сварочные маски у нас в России таких нет , где можно купить такие сварочные маски?
Im new to welding. Will those redwing laces catch on fire?
I use black gasket maker sealer for holes in rubber boots.
Is this helmet available in Ecuador market,😁🇩🇿
halo Is this available for a mask?
Could you please tell me, how far the welding trucks are off the pipeline. Reason manufacture limits it leads to 30 ft. and that close thanks
Has anyone had any luck finding Miller respirator filter replacements?
I just go with 3m pancake p100 resperators, but Amazon carries the Miller p100 filters as well as airgas
One more sticker! Just one!
Excellent. Thanks for posting. All useful info.
I know your intention was to cut down on questions, but I've had an equipment question for a while now and this seems like the place to post it. I'm basically happy with all my safety equipment with one exception: my helmet. Helmet works great except that ambient light, sunlight, ceiling lights often shine in from the rear and produce glare on the inside of the lens. Sometimes, it's REALLY annoying. For this reason, I've been thinking about a pancake because it eliminates that problem. But I see that you use a conventionally shaped helmet and you work outdoors in the sun. What am I missing here?
Any suggestions or thoughts?
Had the same issue switched to pancake and I love it I still keep my sugar scoop for back up but I have used my pancake every day since I bought it
I’ve heard that the flip front conversion makes the helmet heavier. It that true?
Obviously
One option for a lightweight flipup lense, is the lense fitted to a "Protoshell standard" lid, sold in the UK, not sure about that side of the pond? Not all that good as a shield tbh as made from some sort of fibre that doesnt like getting wet. But the flipup cartridge to hold the lenses is great. Fitted one into a pipeliner years ago, for squeezing in and around tight spools and heating coils. Still use it today
Tigerhood?
Thats one well used grinder 😂
Does anyone know if you can get the welding gloves on this vid in the UK, or similar?
Is there anywhere else you can buy those gander brand gloves you besides amazon?
Cool. What ADF filter are you using?
Thanks. Did you try the ArcOne lenses?
Love those carharrts.
what's you're auto lens? I use a Jackson journeyman adjustable 9-13. 2×4 1/4 really clear.My older one has a bluish tint that you can't find in any auto lens out there.I also use Phillips safety Gold lenses with magnetta insert for fixed by far the best viewing clarity in my opinion after 26 years.Give it a shot.Regards Augie
Augustine Avila where in the UK can I get the fixed shade auto lenses? I can't seem to find any anywhere?
Tired of telling my kid, told him to watch your vid. NOW he listens. Thx.
Sellstrom makes good stuff. I had an older pair of safety ABS glasses for the longest until they got too scuffed up.
Hey what's up brother it's Augie.I have the same thing and I love those gloves!! I personally wear the Roscoe FR Shirts they are awesome.I'll try the bibs. later Augie
How do I get into a pipeline company in canada?
Excellent welding because it’s my passion good morning my schools Times thes morning am just working real hard to get my dreams 📝📝🥽🌎🐕🐕📝📝📝📝📝🌎🌎🇨🇦🇨🇦🐕🐕🥽🥽🇺🇸🇺🇸📌📌🐕🐕🏃🏻♂️🙃
Great video!!! Thank you very much!
How did you paint those teeth on the Hood?
@@xAZAZELx13 Did you use a template or freehand?
@@xAZAZELx13 thanks that's badass. I just got my pipeliner Hood tonight and was thinking about what designs to add
Really? You need to ask that question? You need help bro😂
@@ajwilson313 Well if I don't know something, it's human nature to ask...
I'm wondering the same thing
I do really like the redwings but I just can't afford them at this point
I heard from people that thorogoods were comparable to Redwing so I got myself a pair and love em. Might wanna check them out
I kept hearing the thorogood pair tongue is oddly long and strange. I'm trying to find some good boots
Thanks for the video man very informative
Schools welding is hards works 📝📝🌎🇨🇦📌💶🌎
Good security
Which covid jab did you get to work pipelines?
@@xAZAZELx13 I had to tell a company today to stick mine in their ass
@@xAZAZELx13 ya something in my spirit doesn't trust any of these shots. And for something so deadly we gotta test to see if we have it?. I believe Jesus is coming back very soon and is not happy with all this stuff going on. Stay healthy and don't do anything for any price that may cost you. To bad they never came up with real medicine for cancer. They just wanna see what they can get away with . Pretty soon the rubber band is gonna snap