i use a lot of car polishproducts nowadays, but this Meguiars system is AWESOME! One of my trusted "go-to"s.t from pakistan thanks to show its work and how to use
you all probably dont care at all but does someone know of a method to log back into an Instagram account..? I stupidly forgot my password. I would appreciate any help you can give me!
@Terrence Arturo Thanks so much for your reply. I found the site through google and Im trying it out now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
Dale you are brilliant I wish I could bring my car to you I have a lot of scratches on my bonnet but I'm going to use the cutting disc and compound and see if I can get it as good as you 😀
Is the second step just to add protection? Does it add any further correction at all? If I were to use the first step then apply a ceramic coating do I not use the second step?
I currently use the ultimate compound, polish and paste wax, I take this is a step up, so with the two step method is there a need to polish ? in-between correction and finishing wax
So just wondering, on soft paint like a Nissan would you use the finishing pad with the compound? I have a black 350z which I would like to remove etching and swirls from but I know the paint is a lot harder the BMW Z4 I corrected.
Awesome. Question: benefits of using this over compounding and polishing?? Is this primarily for swirl removal whereas compounding is for both paint rectification and refining?
I really appreciate your great videos. However, I’m always looking at techniques to evaluate how I can detail better. Sometimes it’s difficult to understand your technique due to the slow motion editing of the RO polisher passes. I can’t tell if you’re taking your time on the surface or going faster.
Can i use the ultimate compound product whit this Cutting pad, and after to use ultimate polishing product with new microfiber Cutting pad? Or i just need the correcrtion compound d300?
Great job on your many videos. I am learning alot on the steps you take to prep a vehicle before compounding & polishing. I am wondering what you use to remove the residue after claying? Do you just wipe it away then start to polish or do you use a prep solvent to clean the detail spray residue off ? You don't show it so l am wondering. Most other detail channels use some type of IPA spray or other prep solvent to clean before starting to polish. Great job by the way, enjoy all of your videos. How about more on the Detail products line.
I did my car last week with ultimate compound, ultimate polish, and gold class wax, but I still have some deeper scratches left on the bonnet and roof. Would this system get rid of those scratches? I think it's from the previous owner taking the BMW trough the carwash.
@@meguiarsuk and another question, when i remove the residue from polishing i can see very light wipe scratches from my microfiber, any tips on how to prevent them?
There are many ways to touch up, key thing to remember is touch up is only to protect the paint and not to make perfect although one can get pretty close. 1. Use a paper clip to clean rust out of the chip. 2. Apply a rust converter. 3. Apply touch up paint using an ultra fine brush or cocktail stick. For clearcoat fnishes always mix 50% base coat with 50% clearcoat and apply that. As it's difficult to apply clear over the base coat in a stone chip and have a level surface. Then use a cotton bud with a dab of thinners on it and finely brush against the chip until it's smooth and level against the paint be careful not to remove too much paint or you will have to re touch up, one can also use 3000 grit wet and dry sandpaper to level the stone chips. Once smooth and level use ultimate compound on a dual action polisher to blend the chips into the paint and or to remove sanding marks.
How come there is no need for a polishing stage when using this product? And also, what’s the difference between using these two products compared to the ultimate compound and polish?
I recently used the 2 step process for the second time, this time was on my red mustang but I thought I would go one step further and lay another coat of wax by hand by another brand that I had for hand application only, its not come out as planned and wish I had never touched it so can I just hit it again with microbibre and megs wax or will I have to strip all other wax back off to allow just the new megs microbibre wax be the only finish again on the surface ? Is there any other megs waxes you would suggest for adding for future maintenance rather than megs micro wax stage or should I just repeat
Ive been using this system as amateur for 5 years. I really would do 3-4 passes with the finishing polish, rather than just one - especially if you halve soft paint.
Hi.. this is Alagu from (tamilnadu state ) India, Am having 4 years experience in this field. I just follow up all of your products through your TH-cam channel. Am impressed and willing to do this job at my native place. Could i get ur product? If yes, shall i get your contact or mode of contact. Plz..Thank you.
@@meguiarsuk hi ya, what's the difference between these to products to the ultimate compound and ultimate polish?? And do you haft to be very careful with the microfiber pad because of heat build up? I'm extremely new to detailing and iv only just got the ultimate compound and ultimate polish plus the liquid wax using the red meguiars cutting disc, I'm yet to get the other to pads, yellow and black i believe?? Thank you and great video, the car looked like a mirror once finished lol well done
@@tonylyons1274 The biggest difference between the Microfibre system and the Ultimate range is you can apply the Ultimate by either machine or by hand, making it more accessible to the enthusiast or someone new to detailing like yourself. Both will give fantastic results, the microfiber system in 2 steps and the Ultimate in 3. The microfibre system must be applied via a DA machine in order for it to cut efficiently.
The 3 in 1 has paint cleaners to help brighten paint so it works brilliantly on a white car. At the same time polishes and waxes. It can also be hand applied! If you've got some already don't make the change. It's fantastic!
Why all the stupid names call it what it is; cutting compound and polish.. Ffs. Lol you dont need thousands of bottles of diferent crap and hundreds of different tools,
I dont use a lot of Meguiars products nowadays, but this microfibre system is AWESOME! One of my trusted "go-to"s.
It's ACE!
i use a lot of car polishproducts nowadays, but this Meguiars system is AWESOME! One of my trusted "go-to"s.t from pakistan thanks to show its work and how to use
D300 is such a great product. Works so well on all paint types
Always a pleasure to watch your work guys. Keep up the good work 🙏🏻
Thanks!
you all probably dont care at all but does someone know of a method to log back into an Instagram account..?
I stupidly forgot my password. I would appreciate any help you can give me!
@Terrence Arturo Thanks so much for your reply. I found the site through google and Im trying it out now.
Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
@Terrence Arturo it did the trick and I now got access to my account again. I'm so happy!
Thank you so much, you really help me out!
@Grayson Gabriel No problem xD
This is my ultimate go-to for correction
Dale you are brilliant I wish I could bring my car to you I have a lot of scratches on my bonnet but I'm going to use the cutting disc and compound and see if I can get it as good as you 😀
After completing this. Could we then use either Last Touch or X-Press Wax over the whole car and trim for extra wow factor?
What would be your advice for the best way to clean wax out of the finishing pad?
Thank you and Best Regards
Hello guys can you get a 3 inch backing plate for the mt320 polisher ?? Love the demos from Ireland 🇮🇪
Is the second step just to add protection? Does it add any further correction at all? If I were to use the first step then apply a ceramic coating do I not use the second step?
Oooo, Dave's an OG.
Nice job,the finish is well impressive.
Great video. I love Meguiars products, never disappoint
An excellent mirror finish 😎 👌
=D
Which is better ? Correction compound or ultimate compound??
I currently use the ultimate compound, polish and paste wax, I take this is a step up, so with the two step method is there a need to polish ? in-between correction and finishing
wax
hey! guys why dont u use ironX spray system to save some time? :D
So just wondering, on soft paint like a Nissan would you use the finishing pad with the compound? I have a black 350z which I would like to remove etching and swirls from but I know the paint is a lot harder the BMW Z4 I corrected.
Nice work guys looks amazing
Where can you buy the 3" backing plate? I can't see it on the website. Thanks.
Hi meguiars when will there new ceramic products be available for sale in the uk
Where is the close plan to see the removed swirls?
The wax...does gives protection? For how long it last?
Awesome. Question: benefits of using this over compounding and polishing??
Is this primarily for swirl removal whereas compounding is for both paint rectification and refining?
The Microfibre System is formulated to have a heavier cut, this is why it sits in our professional range
I really appreciate your great videos. However, I’m always looking at techniques to evaluate how I can detail better. Sometimes it’s difficult to understand your technique due to the slow motion editing of the RO polisher passes. I can’t tell if you’re taking your time on the surface or going faster.
What's better to use on a metallic white paint? Ultimate compound and then 3 in 1? Or the 2 step microfibre system?..
Can we use a sealant after the finishing wax ?
Yes hybrid ceramic liquid wax is favorite.
How would you compare this to the M105??
Professionnal detailer 👍👍👍👍👍
Easy results to get at home!
Great video great results🤩. Quick question, does the compound you used in the first step have Fillers?
Can i use the ultimate compound product whit this Cutting pad, and after to use ultimate polishing product with new microfiber Cutting pad? Or i just need the correcrtion compound d300?
Great to see the microfiber pads being used...can you use the polishing pad with the correction compound for a finer cut?
You can but you won’t gain the full benefits of it as designed. We’d suggest the Ultimate compound with the polishing pad.
Great job on your many videos. I am learning alot on the steps you take to prep a vehicle before compounding & polishing. I am wondering what you use to remove the residue after claying? Do you just wipe it away then start to polish or do you use a prep solvent to clean the detail spray residue off ? You don't show it so l am wondering. Most other detail channels use some type of IPA spray or other prep solvent to clean before starting to polish. Great job by the way, enjoy all of your videos. How about more on the Detail products line.
I did my car last week with ultimate compound, ultimate polish, and gold class wax, but I still have some deeper scratches left on the bonnet and roof. Would this system get rid of those scratches? I think it's from the previous owner taking the BMW trough the carwash.
This method is certainly for the more deeper scratches so yes you might see further results with this system.
@@meguiarsuk and another question, when i remove the residue from polishing i can see very light wipe scratches from my microfiber, any tips on how to prevent them?
Any links to where I can purchase the Pads and the compound and polish. I cannot find that at the stores.
Can you use the correction compound with a rotary and if so how many passes do you do on a panel??
you should do a video with a car with rock chips that become rust spots. How do you fix those
There are many ways to touch up, key thing to remember is touch up is only to protect the paint and not to make perfect although one can get pretty close.
1. Use a paper clip to clean rust out of the chip.
2. Apply a rust converter.
3. Apply touch up paint using an ultra fine brush or cocktail stick.
For clearcoat fnishes always mix 50% base coat with 50% clearcoat and apply that.
As it's difficult to apply clear over the base coat in a stone chip and have a level surface.
Then use a cotton bud with a dab of thinners on it and finely brush against the chip until it's smooth and level against the paint be careful not to remove too much paint or you will have to re touch up, one can also use 3000 grit wet and dry sandpaper to level the stone chips.
Once smooth and level use ultimate compound on a dual action polisher to blend the chips into the paint and or to remove sanding marks.
@@protonicstorm7228 hey thanks for the reply but i just bought a new car instead. less of a headache
Can you use m21 synthetic sealant after the finishing wax?
You can use any sealent you like.
Ace works lads
Cheers Mark!
Can i use this to polish my knob
Is this any better or different to the ultimate compound and ultimate polish then the liquid wax?
I've just ordered ultimate compound and hope it does the job. Why is there so many different products 😑
I loved it.
Could do with links to the products 👍
How come there is no need for a polishing stage when using this product? And also, what’s the difference between using these two products compared to the ultimate compound and polish?
Right? They label the video as 2 step but this is a one step. Waxing isn't part of the 2 step correction.
I recently used the 2 step process for the second time, this time was on my red mustang but I thought I would go one step further and lay another coat of wax by hand by another brand that I had for hand application only, its not come out as planned and wish I had never touched it so can I just hit it again with microbibre and megs wax or will I have to strip all other wax back off to allow just the new megs microbibre wax be the only finish again on the surface ? Is there any other megs waxes you would suggest for adding for future maintenance rather than megs micro wax stage or should I just repeat
Colinite wax is the BEST!!! Brb using it for years!!
More cut then the M110?
Can I use this microfibre cutting disc with the ultimate compound and the finishing disc with ultimate polish?
I do
does using clay bar make light scratches?
Shouldn't if done correctly lot of lube and keep checking ya clay just incase really small grit that's what would leave light scratches
Ive been using this system as amateur for 5 years. I really would do 3-4 passes with the finishing polish, rather than just one - especially if you halve soft paint.
How many passes would you do with compound ?
@@detailingbymo4044delayed response. 3 passes on cutting
Hi.. this is Alagu from (tamilnadu state ) India, Am having 4 years experience in this field. I just follow up all of your products through your TH-cam channel. Am impressed and willing to do this job at my native place. Could i get ur product? If yes, shall i get your contact or mode of contact. Plz..Thank you.
How long does the finish wax last for ?
Where can we get these products from ?
Either our website, the Halfords website or Amazon plus more online retailers.
@@meguiarsuk hi ya, what's the difference between these to products to the ultimate compound and ultimate polish?? And do you haft to be very careful with the microfiber pad because of heat build up? I'm extremely new to detailing and iv only just got the ultimate compound and ultimate polish plus the liquid wax using the red meguiars cutting disc, I'm yet to get the other to pads, yellow and black i believe?? Thank you and great video, the car looked like a mirror once finished lol well done
@@tonylyons1274 The biggest difference between the Microfibre system and the Ultimate range is you can apply the Ultimate by either machine or by hand, making it more accessible to the enthusiast or someone new to detailing like yourself. Both will give fantastic results, the microfiber system in 2 steps and the Ultimate in 3. The microfibre system must be applied via a DA machine in order for it to cut efficiently.
nice iam from apkistan
So this wud be better to get a lovely finish on my white car rather than a your ultimate compound and then your 3 in 1 cheers
The 3 in 1 has paint cleaners to help brighten paint so it works brilliantly on a white car. At the same time polishes and waxes. It can also be hand applied! If you've got some already don't make the change. It's fantastic!
Great job, now go out & wash like us noobs and return those swirls.
👕 should read "Better than factory finish" - no ??
Calls himself detailing Dave but his cars paintwork is in that condition 🤔
Probably not his car!!! You see detailers have what they call "customers" if it's his who wants to work on a car after working on one all day???
Probably removing the swirls put in by clay barring 😂😂👍🏻
If you are getting swirls from claying Jason you're probably doing it incorrectly !
Why so much taking you explained clay 3-4 times in three sentences just clay it our eyes work
Why all the stupid names call it what it is; cutting compound and polish.. Ffs.
Lol you dont need thousands of bottles of diferent crap and hundreds of different tools,
What are the mild cleaners in the finishing wax does it actually remove light defects or lightly clay?