Reinstalling the Headliner On 2010 Mazda 6 GH
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Step-by-step, how to reinstall the headliner in my estate Mazda 6 GH.
Disclaimer:
Due to factors beyond the control of Klavs, I cannot guarantee against improper use or unauthorized modifications of this information. Klavs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I, Klavs recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Klavs, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Klavs.
Hi Klavs! Your videos are really good and help a lot! Most recently I changed the belt in the engine compartment. Thanks for the information that the belt has to be 2300mm and not 2885mm. That saved a lot of nerves! Please keep up your videos! Would like more of it! I've watched every video about the Mazda so far! I love her! Make a few tuning videos or just a driving video! Best regards! Michael from Germany
Hi Michael. Oh Germany, nice.
Glad they can help. 👍 Oh , that video. Yeah, to many people are driven insane by that, glad you could escape.
I do what I can, driving videos i could do, need to learn new tricks on editing.
Wish you all the best
Klavs, my man 😃 Nice video! Something that would be really cool would be to install like starlight effects under the headliner, while you already had it out, like Rolls Royce has on their car 😂 You just need to drill out 350-400 holes for the star effect 😅 I'm gonna be honest with you, i am considering doing it on my new Mazda 6, for our child 😂
And for me.. 🤭
😏 IF that wouldn't be on my Throne list. 🤔 Ready to go and rock and roll. Only they are expensive, and the amount of time you have to put in.... Damn.
That would be a special edition Mazda 6 for sure ✌👌
@@KlavsX_ Well yeah it is a whole day worth of project indeed. I found a kit on Amazon for around 110$, not saying it's cheap at all, but the results would be worth it , in my opinion 😁 Only downside is that you would need to figure out where to place the light projector, but that's probably not a big deal.
Day's project, I hope so.
Only problem with the cheapos are how bright the lumens will be. Fiber optic strands should do the job, but brightness at day time is questionable.
@@KlavsX_ Fiber optic strands! That's what i am talking about. Forgot the name for them in english 😆 They usually come with a traditional thin LED controller with options for colours, effects and brightness, and some are controlled via applications on your phone 😄 If they are too bright, you could always turn down the brightness, or choose a warmer colour.
for me it's if the LED is good / bright enough, as it's a car / day time , + driving around so it doesn't blind or distract the driver xD
hey klavs! Your videos have been such a big help, would you happen to know how to remove/replace the rear seatbelts?
Hey. Glad the videos could help. Yes, you should be able to unbolt under the seat and then pop the cover off at the top.
If you can wait, I can make a video this weekend on this.
@@KlavsX_ funnily enough that's exactly where I'm stuck, I don't know how to get the reel out from inside the seat haha. I'll happily wait for a video. You're a legend
I will try to film the video this weekend, lets see when I finish editing it.
Hey Klav this was very helpful next on my list 🫡. And also make us a video how to change the rear number plate lights . And….
There’s a few problems which I want to fix and the first one is that the clutch pedal is squeaking .
The second problem is that after Driving for maybe an hour or after the car heats up the gearbox won’t go into first gear and reverse . or should I say it will go but I’ll struggle with it. Any advice or could give a hand or just help me with this it would be much appreciated thank you
Hey Andrei. The channel should have a video about replacing/upgrading the number plate lights.
Ah, the clutch pedal problem is the rubber surrounding the clutch rod going into the firewall is all dry. A bit of silicon grease will do the trick. (I had the same problem.)
Gearbox problem, hmm. I need loads more information as if you aren't there in person or driving the car, it will be a guessing game.
Any noises? were services done? Has the clutch been changed? Loads more I need to know, before trying to throw a guess
@@KlavsX_ there’s no noise and yes car had new clutch fitted few months ago ago but also after that car has been sitting for around six month be I bought it .
You have been told for 300 - 500 km or few hundred miles you have the wear in the clutch?
If it's only 1st and rear gear then something could be in gearbox, sensor, or other...
But it could be that the clutch isn't aligned properly, without driving the car myself it's really had to tell.
Hellooow! I really appreciate your videos and help! I have a question for you! Do you know why my headlight suddenly are aiming very low? I have xenon headlights and one night everything was perfect, and next night, ops, they aim very very low, if you can tell me what to check first? Thank you in advance!
Hello. Glad the videos help.
Sadly over time, Mazda lost their calibration on the beams. It all depends on the type of headlight and xenons you have, a few versions of them headlights have an adjustment screw at the back.
A couple of people have emailed me with the headlight level sensor being broken and the headlights don't adjust anymore.