วีดีโอ

😅 Yeah, that will work too. Oh the Scotch tape is a beast, but for my application would be a total pain in the rear. Easier to unscrew 2 bolts than deal with that mess Every time I go to the airport I have to switch to standard, no 4D license plate. ( The automatic barrier doesn't open and you have to ring the support)

😅 Had the same idea. It doesn't fit anyhow. Not at the bottom or the side/ back of it. The hub is to big

You are welcome. I wouldn't bother painting if the rims aren't damaged or looking ugly. 😅

@KlavsX_ in my case the rims, as in Mazdas, the original paint on the alloy wheels has degraded and looks poor

Then yeah, it's time to refresh them. Just a tip, Do sand off the old paint from the rims, as there could be problems if you shoot new paint on top of the failing paint.

Noted. Thank you for the info. It will be very useful to all of us 👍👌✌

Glad this video could help 👍 No, it didn't make any sounds, the gear changes felt weird, that's all. I have a Haynes manual, (a book you can buy). Many bolts need specific torque and forums are a mismatch of numbers most of the time.

Yes just looked, surprisingly the Haynes manual is still available as book, not the new autofix online rubbish. Thanks

You are welcome. 👍 There is a digital version of the Haynes manual, but I prefer a hard copy

Hi. Glad the videos can help. 👍 Suspension rebuild is in the plan. Once I have all the parts and the tools then I will record. I'm not really sure if they would work. You need to be careful how thick the struts are. There needs to be clearance between the tailgate and the strut. Electric tailgate sounds good, but research and measuring must be done. 😅 Wouldn't want to waste money on a kit that doesn't work.

The Aliexpress sellers ask for photo measurements, so it's irresponsible to order without nearly 450$. The only thing holding me back is how to program the remote to work with the factory remote. I would link to a shop(mikstoreph) that is not aliexpress, but youtube won't let me :( The one you find there I think would work with the GH.

😅 Yeah Links are banned on TH-cam. I would go for a 2020 to 2023 Mazda CX-5 electric struts, as they could be more compatible than random aliexpress. But as I mentioned, loads of measuring and researching has to be done.

Glad you like the videos 👍

👍

👍

You are welcome

If you are in a rush, check out the headline removal video. After that there are 4 bolts that hold on the roof racks. For me to make a full video I need extra materials and bits, to do it properly so the car looks standard

@ hey, could you drop a list of things ill need to cover the holes please?

cover what holes?

You are welcome. Hope they help you out with your car. Oh, nice, greeting from UK.

👍🎊

Thank you. Actually tomorrow I will record the 1 year latter video. Showing how it looks now

Thank you

😅 I thought it would be like 12 or 14 like BMW's. Oh... how I was wrong 😂

The link should be in the description

That port never worked.

Glad this could help. 👍 I was going for 2 months w/o knowing this) 😅

No problems with the 2300 belt. Runs like a champ. 👍 You can use a 2305, as long as the belt doesn't slip or make squeaking noises 🤔

You would, apart from living in UK and having to pay for all that. 😅

Plenty of space for a engine swap. But that would cost a lot 😅

Glad the videos could help you 👍 It's all planed in the future. ( front shocks, timing chain, front and rear seals, new clutch, new subframes) It all is in planning

😅 Don't worry, I did. Even tried WD-40 specialist penetrant after the normal stuff didn't work. Had to edit almost all of that struggle out. 😂

Pazinai, pardevu. Masina joprojam iet un kalpo, pagaidam nekads briesmigs servis nav bijis.

👍 Awesome. Enjoy the car. I do hope it has, as that was the only downfall of the car. You can't cruse in autopilot 😅

it ''feels'' smoother. Going in gear easier. It's hard to explain it without experiencing it 🤔

The roof rail video removal is in the resource assembling stage, to a full roof rail delete video will be coming out in future. I don't see a reason why they wouldn't fit, only problem you will need to splice in one of the turn signal wires to activate the side mirror bulbs

@@KlavsX_ Excited for that video! I meant if the connector on the GH without side mirror bulbs would be ready for side mirrors with bulbs, without any splicing needed. Might disassemble and check it with a multimeter to find out (I have no idea what type of connector is even on there though)

The only problem is, the mirrors and how they attach to the doors '' should be'' identical. Only extras would be 2 or 1 wire for the turn signal. That is concerning the mirror itself. To power the turn signal on the mirror is a different story.

😅 It is pain. Sadly not, the newest /2015 as far I know, is almost the same. But I could be wrong.... 🤔 I hope I am

🤔 That's why cruise control exists? 🤔

😅 it all depends how old and mailable are the lines. IF they are hard and don't wanna bend, you can break them or split them. Best way is a fast swap, from old to new caliper, so you lose minimum amount of fluid

😏 You win some, you lose some, this BMW lost a lot. Mostly all the tension in the chain xD

Thank you for the info, that will explain most of the things I didn't catch. Awesome, I wanna a panoramic glass roof that is cool.

Nice. For me I had to buy and splice in a separate module, that the head unit did come with

@@KlavsX_ Ok, thank you very much for the information. 😊 Dare I ask which splice you're buying?

You are welcome. I can't find the right one I bought, I searched on ebay DAB + amplifier box for android head unit. Should be a USB plug at 1 end and a antenna you can attach to the A pillar at other. The brand I got works really well

Great ! Thank you.😊

👌

I usually have a fan blow on me / on the part I work, so all the ''crap'' flys away. ( As long as the fan isn't in the way for recording) 99% fan is in the way and doesn't help at all. 😅 100% correct rust, dust and w/e flys off the car parts isn't good for you or your lungs.

Thanks' for the PDF's they saved me from destroying the covers fully :D

👌

Good luck and hope the plastic tabs will be kinder to you 😅

Thank you for the info. 👍 This video will be useful for more people than just wagons owners 👌

😅 They did over-engineer the estates

Hi. I don't know about the GJ models, but you should plug in a scan tool to see the actual problem. ( trouble code) Keyless system have multiple sub-systems ( receivers, antennas, sensors, and more). Can be as simple as: the key battery is low to 1 antenna has gone bad. Without a scan tool, it's a guessing game

👍 That shouldn't be to hard

Most modern cars have a EGR, that are petrol or diesel. EV and maybe older cars without emissions control don't have EGR's.

You can use the same, but make sure that No tabs are coming in contact with the piston. The tabs can damage the piston and you will need to replace the piston

100%, if I'm not wrong only Estates / wagons have the rear seatbelts in the seat

😅 Can't lie, that did happen a couple of times for me, before I got to this situation.

Ah, so yours is damaged or just full with debris. I got you 👍