Idea and videos are very very good..thank you.. but actually with last video you fu**** up everything.. 17/24 min was repeating, whyyy??? Then in last 2 min most important part and when I expected to see final proces, you just skiped to show how and where and just said I removed everything and problem is graphic card. I came here to see, not just to hear problem is this.
Go here 17:00 if you watched the other videos. Good video like how thorough you are, it's a shame the first 17 minutes are the same as the previous videos. Quick question in the end you say you have to remove the inductors and check the components around each inductors, couldn't you just check the capacitors around each inductor and see if they are shorted? If non is shorted than it's the graphics card but if you find one capacitor shorted you can remove that one and avoid removing all the inductors, or am I wrong?? Cheers.
Thanks for the video, however the first 2 set of video looks alike to the 3rd❤ and I was expecting you to minimise your explanation and fixed the fault itself rather you only explain the senmatic to us .please pick customer faulty board and explain how you fixed it. Thanks ❤
Amazing !!! Great TS workflow sir, tank you for sharing of your knowledge ! That would be fantastic if you share how you approach the failure without schematics, if there are some hints using PCB rails and layout to grasp the architecture and the logic in between?... For sure it won't never be as easy as with diagram but still hope there are some tricks which can ease it up a bit... Great if you find a time to launch some tutorial series on that as well. Thank you !
Informative guide showing how to isolate short circuits to find the cause. It's unfortunate that the problem was the graphics card which can neither be repaired easily nor economically. For average people, buying a new laptop will be the only viable option. And like someone said from other comments, 2/3 of the video was the excerpt from the previous videos which are redundant and time consuming.
Hi new subscribe here really like your videos especially this one I want to ask you in the case that you don't have the (pad) section my ges is that you will pull the coil out right to isolate the area . I have a Issue on a msi labtop Short it . and I got to Isolate the short to 2 coils but I not ben able to find the short they both have mosfet and catalyst capacitor 3 mosfet were bad and also the capacitors but the short still there both coils are grounded and the positive were the capacitor were is short it to. Now i learned buy your video that there is a chip that will control the 2 coils if you can confirm all this I will appreciated. I am a old hobbyist of electronics but allways a big inner Thank you and thank you for your videos I find 3 MOSFET bad
Thanks for subscribing and for your detailed comment! It sounds like you’ve done some thorough troubleshooting already. Isolating the coils is a smart move, and yes, there’s often a controller chip involved. Keep at it, and I’m sure you’ll find that short
Bonjour, merci pour vos vidéos c 'est très claires, j' apprends beaucoup., merci. Je voudrais faire un don mais je n'ai pas de compte PayPal, comment faire ?. Bonne continuation.
Idea and videos are very very good..thank you.. but actually with last video you fu**** up everything.. 17/24 min was repeating, whyyy??? Then in last 2 min most important part and when I expected to see final proces, you just skiped to show how and where and just said I removed everything and problem is graphic card. I came here to see, not just to hear problem is this.
See this is why I always say..
This guy does not show the important process
The best class that I have seen. Thank you very much!!!
Wow.... We moved down the rabbit hole till we got our culprit. Thanks so much for the knowledge. We highly appreciate.
You are very welcome
you are very welcome
Go here 17:00 if you watched the other videos.
Good video like how thorough you are, it's a shame the first 17 minutes are the same as the previous videos.
Quick question in the end you say you have to remove the inductors and check the components around each inductors, couldn't you just check the capacitors around each inductor and see if they are shorted? If non is shorted than it's the graphics card but if you find one capacitor shorted you can remove that one and avoid removing all the inductors, or am I wrong?? Cheers.
Sei un grande professionista. YOU ARE NUMBER ONE! .................Thank you so much!!!!
Excellent video! I can tell you took time to create this presentation and the quality shows. Very easy to understand. thank you sir!
Wow, thank you!
Thanks for the video, however the first 2 set of video looks alike to the 3rd❤ and I was expecting you to minimise your explanation and fixed the fault itself rather you only explain the senmatic to us .please pick customer faulty board and explain how you fixed it. Thanks ❤
Your efforts for teaching are commendable.
Glad you think so!
Amazing !!! Great TS workflow sir, tank you for sharing of your knowledge ! That would be fantastic if you share how you approach the failure without schematics, if there are some hints using PCB rails and layout to grasp the architecture and the logic in between?... For sure it won't never be as easy as with diagram but still hope there are some tricks which can ease it up a bit... Great if you find a time to launch some tutorial series on that as well. Thank you !
Great suggestion!
I really admire your lessons! I admire the clarity and simplicity of her lessons! I follow her from Puglia southern Italy her is great!
He/his not she/her..
Hello sir have a good day i'am kepp watching all your videos upload in video i've learned a lot thank you. I'am from philippines.
You are very welcome
You are the best teacher. 😊
Thank you! 😃
Many thanks and grateful for this explanation..you are super teacher😊
Thank you! 😃
You make it look simple coz I had failed to understand diagnosis until I landed on your video thand bro👍🥳
You are welcome
It was a great job my friend. I learnt a lot useful points!!
Thanks a lot.
From iran
I'm so glad you found the video helpful!
Informative guide showing how to isolate short circuits to find the cause. It's unfortunate that the problem was the graphics card which can neither be repaired easily nor economically. For average people, buying a new laptop will be the only viable option.
And like someone said from other comments, 2/3 of the video was the excerpt from the previous videos which are redundant and time consuming.
شكرا جزيلا لقد استفدت كثيرا من دروسك.
You are very Welcome
i am so amazed that i wish i could subscribe 2 times! thank you for sharing this Sir!
So nice of you abdoulaye
Thanks Sir! Please post link for laptop schematics or state how/where to find it.
Nice to see you back. Thank you so much for all your valuables videos
you are so welcome David
Just a question. What is the purpose of all these coils?
It's purpose is to control the current in circuits (increase the current)
@@electronicsrepairbasics_erb thank you. Can’t wait for next video.
U ar really good at what u do, nice one sir🎉
Thank you Ridwan
Your explanations are terrific!
Thank you
I have no words just wow you really are a teacher thank you 🙏
Thank you
WOW, This is great lecture, I love it, I enjoyed it, Very clear, Thank you very much more making out time for this great lesson
Glad you enjoyed it!
Educative lessons ever seen thank you sir I appreciate it
So nice of you
You are a born teacher. Thank you!
thank you Maks.
inclusively clear and understanding, keep it up
Thanks, will do!
Very informative thank you very much
Thank you
Thank you teacher👍
Any time
Thank you very much!
You are most welcome
Excellent tutorial keep up the good work.
Thank you
Thank you for make detail video with image.
So nice of you
Have watched many times still not getting it😢 the schematic diagram even confusing me the more am a novice
I really want to learn this
what did confuse you?
Yeaaa! MORE MORE MORE!
Always more and more
Thank you so much : it's useful +++
Glad to hear that!
Thankyou For Sharing this great Video. Sorry Mr. How can I get Schematic, can you give me link for download Schematic ? Please.
Hi there,
You can Join me on Patreon Page where I upload schematics for free
Very Very Good... Thanks .
thanks dear freinds good job
Welcome
Please, sir, would you please give us a explain about LAPTOP BOARD S5/S4/S3/S0 STATES
Noted Mr Khaled. Soon
Thank you so much l learned to you ❤
Where did u get the schematic?
You can use Google to search for free schematics, or you can join me on my Patreon Page and I will provide you with any schematic you want
Excellent tutorial
Thanks
Great video
Thanks for the visit
i learn a lot thanks
Happy to help
Good lesson
Thanks for watching
Excellent sir 😊
Thank you Usman
العطل هذا le panne معقد مكانش عفسة تقولك مباشرة بلي VGA محروقة؟؟
amazing tutorial
Glad you think so!
All 3-video should have been under 10 minutes.
Very Good. Thx!
Thank you
Great job ,wILL YOU SHOW US HOW TO VOTAGE INJECT.
Hi new subscribe here really like your videos especially this one I want to ask you in the case that you don't have the (pad) section my ges is that you will pull the coil out right to isolate the area .
I have a Issue on a msi labtop Short it .
and I got to Isolate the short to 2 coils but I not ben able to find the short they both have mosfet and catalyst capacitor
3 mosfet were bad and also the capacitors but the short still there both coils are grounded and the positive were the capacitor were is short it to.
Now i learned buy your video that there is a chip that will control the 2 coils if you can confirm all this I will appreciated.
I am a old hobbyist of electronics but allways a big inner
Thank you and thank you for your videos
I find 3 MOSFET bad
Thanks for subscribing and for your detailed comment! It sounds like you’ve done some thorough troubleshooting already. Isolating the coils is a smart move, and yes, there’s often a controller chip involved. Keep at it, and I’m sure you’ll find that short
Hello can you pls give link for free or paid schematic diagram of kost laptops?thnk you
You can join me on my Patreon Page where you can upload many laptop schematics for free
thank you sir
Please shematic diagram HP one pro 400 G1
bravissimo!
These 3 videos were way too repetitive and drug out.
It's some kind of click-bait))
Bonjour, merci pour vos vidéos c 'est très claires, j' apprends beaucoup., merci. Je voudrais faire un don mais je n'ai pas de compte PayPal, comment faire ?. Bonne continuation.
C'est gentil Gaby, merci. Vous pouvez supportez la chaine en utilisant THANKS bouton sous les vidéos ou en participant au Patreon Page.
Merci
ThankyouSir...
All the best
Video 3 is the same as 2
Go to 17:15 min
awesome
🥰
Thanks
Sir please I want to help me to be fact in laptop repair please
Join me on Patreon Page, you are so welcome
Your audio!?!?!
Amazon video master
your are repeated shots ... Very bad . And finel desigin explen ( mothboard on or off). Videos very good.