How to Replace Fuel Injectors 01-06 Chevy Suburban
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- For More Info visit us at: 1aau.to/h/gU/
In this video, 1A Auto shows you how to repair, install, fix, change or replace a dirty, dusty or clogged fuel injector. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, Chevy Suburban, Tahoe, or Silverado pickup truck; or GMC Yukon or Sierra.
This process should be similar on the following vehicles:
2000 Chevrolet Suburban 1500
2001 Chevrolet Suburban 1500
2002 Chevrolet Suburban 1500
2003 Chevrolet Suburban 1500
2004 Chevrolet Suburban 1500
2005 Chevrolet Suburban 1500
2006 Chevrolet Suburban 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ofi/1AX...
• Pry Bar 1aau.to/oa8/1AX...
• 10mm Socket 1aau.to/oeg/1AX...
• 8mm Socket 1aau.to/oeg/1AX...
• Slip-Joint Pliers
• Ratchet 1aau.to/ofx/1AX...
• Cloth Rags 1aau.to/oae/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Suburban 2000-06 9th Gen: • Chevy Suburban 2000-06...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/gU/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Just a heads up, I've preformed this a number of times on this same 5.3 platform and there a alot of nuances that were left out.
1 Lube the injector o rings bc you'll tear them easily.
2 pull the entire rail side lube and inspect all in injectors (test as well) 12 to 17 ohms i believe
3*
And very important I might add!
Be sure you push down evenly across the rail to seal the o rings so they do not cock sideways..
When back together cycle the key (do not start) and in spect while key on engine off that there are no fuel leaks.happens often and they can be VERY slight leaks.
4
Not out if the woods just yet.
Bc they. An still vacuum leak and not leak fuel.
This can be a major stumper.
Spay carb cleaner around the injectors and base of the intake and listen for idle stability to change.
Best done if you have a scan tool to watch short and long term trim values while starting for the vacuum leak.
Hope this actually helps someone.
Took me a while to learn these methods (another words I screwed up alot bc I didn't kw the details) got it down now though and so can you.
Read up on trim values buy a cheap scanner and you can diagnose most newer car issues with your brain and that trim data.
✌🏽🇺🇸💯
+T Wizz Thanks for the feedback!
Great vid. However, all should be replaced, not just one. And, one thing no one mentions is how important the o-rings are. A thin film of oil should be put on the o-rings. Helps with install, and lengthens the life of the o-rings.
What kind of oil for the o ring
After having my Yukon hooked up at car dealership they told me it was my #6 injector that was out. I couldnt afford to have them to fix it and was dreading doing it myself. After watching this video it was a snap. So, thank u guys. You made it so simple and easy to follow.
+Floyd Thacker Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Fr y'all have given me confidence to work on my own car so many time thank you guys for making it short and simple no gimmicks with you guys 👍👍
Did you have to bleed air out or just plug in new injector and everything will be ok
Great video, as always. Love that y’all simplify it and don’t add a bunch of unnecessary info 🤙🏼
You guys make it look easy. I know the ones on the right side are harder. Any tips?
Please show how to change the other 7--the one you chose looked pretty easy. I want to know how to do the ones that have everything in the way.
The 05s to about 09 chevy vortec v-8s are the same as this 04 when replacing a fuel injector
You definitely need to tell people to inspect for a fuel leak after the repair!
"best service on the internet "😂 good stuff tho
Thanks for the video was expecting it to be a bigger chore but went smooth 👌thanks again!
my 05 suburban in the auto pc ck up it came out that #4 was showing up I replace wirers, coil and spark plugs (replaced coil @#4 and still showing up on the computer. Replace #4 spark plug again and found some wetness on the spark plug. Can this be due to the fuel injector at #4?
what its the cylinder number 5 on 2000 Chevy suburban 1500 ?
Does the fuel injector have to be installed in a specific order on the engine ?
Nope
I have Denso fuel injectors on my Flex fuel 2002 Suburban. Aren't the fuel injectors coded to match individual cylinders? Looking at mine and I see alphas and no numbers designations.
Thanks, makes it simple and quick. You should do a close up of prying the clip off that way if you mess it up we'll see it and not feel so foolish if we do it.
+Don Lute Thanks for checking us out! 1AAuto.com
what's the torque spec on those 4 bolts?
Don’t break them
Thanks A-1 for all your videos so helpful
1aauto should you replace all your fuel injectors at once
yes, considering how cheap they are.
Jack Winand cheap? They go for about 100 each thats 800$ 🤣
Being that they pulled both fuel rails, they probably did. Why film the same process 8 times?
Could a bad fuel injector cause a random misfire on cyl #8? p0308 - can I get away with just changing one or should i change them all at the same time?
merci , cela m'a conforté dans mon effort de démonter la rampe des injecteurs car j'avais un qui balancait un max de carburant dans le puit de bougie , relax pour le travail merci
Do you have to remove the relay and let the vehicle die? I am just trying to get the fuel injection rail out of the way to remove the intake pls help me out
i like the videos just wish they would do the hard ones Like the 7cylinder instead of number 2
Will L59 flexfuel injectors (gonna tune just gas) fit a no FF fuel rail without modifications? The L59 8s 6mm taller
When ordering fuel injectors on your site, it showed me a set of 8 but they are 4 hole injectors. The factory injectors are 2 hole so I would like to replace with the same. How do I specify on the site ?
Looks pretty straight foward. I am not sure of prices at a1auto. But there a "C" note apiece were i am at. Yes makes sence replace all at once. But sometimes if its not broken shouldnt fix it.
I have a 2002 gmc yukon xl 1500 slt 5.3L LS engine with 237,000 miles ("Z") on the eight digit in Vin number. I will be replacing the knock sensors soon and was wondering if I should go ahead and plan to replace my fuel injectors at the same time???? I'm also planning to replace my crankshaft sensor and oil pressure sensor too. I did read the GM bulletin regarding the removal and disposal of the foam insert off the rear side of intake manifold and the RTV around knock sensor seals. Again, thank you for all the videos and quick response.
Please help me William. I have the same issues as you the same exact ones it’s idling really bad up-and-down loss of power bad miles per gallon. I had to knock sensors changed and it didn’t help does your truck have loss of power and idle issues ????
I don't know what else to do. I've tried everything but the fuel injectors and the mechanic charged me 600 to do the knock sensors but it doesn't help at all
Why does every tutorial completely skip over the right side with the massive bundle of harness that makes it impossible to remove the back two injectors
I have a 2002 Suburban 1500. My current injectors do not look like the ones your replacing in this video. Mine have a square area next to the oval plug on the injector itself. My harness would not fit the injectors in this video. Any explanation?
There is so much left out in this video 😂😂😂
Awesome job. Love these videos.
+Mouse Marie Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
How do you push it all the way in it doesn't go all the way in we're the rubber seals go
Is it the same for a 2007 5.3 newer body style?
Why did they take out the fuel pump fuse
What makes the injectors go bad?
very helpful video, thanks
+Norman Ness Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Hi there my truck is missing a o ring from an injector is that bad?
+NationalGuard69 It should be replaced so that the injector does not leak fuel. Thanks for watching. 1aauto.com
Did youbuse any Vaseline to lube the o-rings?
I have Tahoe 2012 LTZ
the issue start from 40 to 60 km/hr and 100/120
vibration in all car and the RPM jumping same as speed
I changed the spark plug and new wires but still the same
Can you reuse those metal clips if you need to? Or once they pop off that’s it? Love the channel
Yes you can use the metal clip over. But be careful not to let it go flying around when you snap it off.
Has anyone used 1a autos injectors?? I’ve read mixed reviews.
On a 2016 Chevy Silverado, the engine light came on. Putting the injector cleaner in the tank made it go away for a little while but it came back on. Taking it to the dealership, they said that cylinder 2 and 6 were misfiring. Any ideas on how to fix it?
+Richard B Did you try swapping fuel injectors to verify the injectors weren't bad?
@1aauto is this the same thing for a 2003 gmc envoy sle I've been looking for a video on my car and black and white pictures aren't helping me out at all can u make a video on this for a gmc envoy sle as a beginner mechanic it will help me out for my truck and impress my boss at the shop I work at thanx like always ur videos have helped me change a lot of parts on my truck thanx again
+Adam Drucker These injectors also fit that application. It should be the same or a similar process. Here is a link to the injectors that we carry on our website. Hope this helps you out. www.1aauto.com/fuel-injector-ac-delco-17113698/i/aceek00002?TH-cam&CTA+Comment&SG6W6t2KgM
Is this the same for a 2004 Chevy Silverado 1500 Base V6? The fuel injectors it calls for don't look anything like the ones in the video
No those are spider injectors . Your gonna be pulling off alot more
How come you didn’t show how to do the fuel pressure regulator side
Hello Sir. I have 2004 GMC Sierra 2500HD. I had codes P0300 and P0455 for over 2 years. I have been trying to fixed the codes ,and replaced all spark plugs and wires. Codes still the same. I replaced all coils. Still the same. I replaced Air flow, still the same. So,I decided to replaced all fuel injectors, still the same but 2 new codes came up on my OD scanner. P0107 and P0200, fuel injectors open. I tried every and could not regain power back. What is? Did I do something wrong?
Ever figure it out?
great video! Very helpful
What did it do when the injector was bad
Thanks for the vid
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
Why do you pull the relay? To take fuel pressure off the injectors?
Yes and prevent fuel from spilling out when replacing
Been trying for 4 hours to push the driver side fuel rail back on smh and I can’t
i Have a 91 ford 350 box truck needs brake lines and has injector issue. does that cost alot to repair ?
Perfect, doing an 04 lol thanks
Put all new fuel injectors in now truck is very hard to start
Glenwood Jenkins
When you change all the fuel injectors and finish all the steps, before you attempt to turn on your vehicle you have to give it a few key ignition turns to let the gas get in the fuel injectors. Otherwise you may have trouble turning on your vehicle. Hope this helps.
i had a misfire in cylinder 2 on my trailblazer i changed my spark plugs in all the cylinders and even changed my coil pack for cylinder 2.. i put my car on my scanner again and now it's saying cylinder 5 is misfiring i changed the coil pack and plugs..and when i step on the gas it shakes...do you guys think my fuel injectors gone bad??
did you get that fixed
Yea i did.. i just cleaned my throttle body
LeMark Wash you change the plug wires too?
No i didn't have to change any wires.. turns out i had to clean my throttle body that was the reason why it was shaking and hesitating to take off.
a lil late answr but yes it is i have same problem
Well this work the same with my 2007 Chevy avalanche
+Rodney Hidalgo This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c
Question,
After changing eight of my injectors just for the heck of it I noticed that for some reason now it hesitates to start sometimes what can this be? Could the fuel filter be clogged?
Replace fuel filter mine was hesitating to turn on I just replaced mine and now it turns on no hesitation or anything sounds strong again
how to install fuel pump and gas switch changer
Excellent video!!
does it have a total of 8 fuel injectors?
+Jesse Rojas Yep, one in each cylinder. Great question. For anyone else who might be doing this job, we carry the parts shown in the video on our website. Order from us and we'll cover the shipping. Here's a link: www.1aauto.com/fuel-injector-ac-delco-17113698/i/aceek00002?TH-cam&CTA%20Comment&ATony
Thanks I'm going to try this method , I've replaced the spark plug + wire+ Coil pack + MAF + air filter , And still getting p0174 p0306 code on #6 cyl
did you replace the intake manifold gasket
Bull mastiff, any luck with your problem?? I have the same exact thing going on right now with my 09 Silverado. I changed all that you changed too, even did a compression check (with a gauge and my fingers) and have great compression.. so any heads up would be amazing and greatly appreciated!!
@@kyleking7318 Did you figure it out?
Thanks for vid.
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
So I took out the fuel pump relay and my 2010 Silverado kept running like nothing happened. Maybe it’s a bad fuel pump? Any other idea what it could be?
Their is no relay for the pump on that model silverado. The fuel pump is controlled by a control module in the rear above the spare tire.
Lmao baby has the egr delete plate
Which side is bank 1 and bank 2 that's what you didn't explain
I don’t recommend wearing your wedding ring while working on cars. I knew I guy that got his finger skinned.
+Chus Papi Thanks for the feedback!
I only take mine off to weld.
no :( it's still sluggish and now hesitation , what can it be ?
huh???????????
you didnt turn it back on DX
+Adam Outlaw You're right, we should have. There's nothing more satisfying than hearing a car run like it should once you've finished a repair on it. Maybe next time! Thanks for watching. 1aauto.com 866-403-3393
good job don. a little slow though
Thanks for checking us out. 1aauto.com +Jessica Galvan
That's 8mm dude !
What clip? Please show the clip? Didn't help one little bit.
could it be #4 fuel injector my problem?
+Carl Zorro This is a really tough problem to diagnose over the web. It sounds like you need to have someone take a look at it since there are so many things that cause a sluggish engine. 1aauto.com?TH-cam&CTA%20Comment&ATony 866-403-3393
This video just confused me even more. Not enough close-up shots and none of the bolts are what you said they were.
Check for leaks!
+brunorosi Thanks for the tip!
@@1AAuto 😊
You only showed the ezest 1
+Robert W AKA Sideboob Thanks for checking us out!
I'll have ta agree, that is the easy one, I just did all 8 on my 02 tonight and 1,3,5,7 are much worse, lol. Lots of fun!
+Joseph Granat Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I can not see how you un clip because your fingers were in the way
+Hold it down Thanks for the feedback! We'll pass this info along to our production team.
Yes, how about ALL OF THEM????? Not just one
Repeat the steps shown for each injector...
Double you tee ef
You was scare to go outside . Lets talk on camera . Loss prevention was gonna put you to sleep sleep .