How to Replace Starter 2007-2010 Chrysler Sebring
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2022
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AEST00508
This video shows you how to install a new starter on your 2007-2010 Chrysler Sebring. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oe3/1AXAA00013
• 13mm Wrench 1aau.to/oa2/1AXAA00010
• 15mm Wrench 1aau.to/oa2/1AXAA00010
• 13mm Socket 1aau.to/oeE/1AXAA00015
• 15mm Socket 1aau.to/oeE/1AXAA00015
• Ratchet 1aau.to/ofj/1AXAA00016
• Socket Extensions 1aau.to/oeE/1AXAA00015
• Torque Wrench 1aau.to/ocG/1AXAA00044
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/oB/1AXAA00280
Subscribe: / @trq
Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation: • Chrysler Sebring 2007-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
There is access to the ground from under the hood, by the driver's side strut tower.
Why not unhook the negative cable from the top. Strut tower area..
1. With a new battery starting is still sluggish.
Thinking of replacing the starter and have been watching a few of these videos. Thank you for this. Very informative. I watched a couple that didn't involve removing intake. Any thoughts?
I found out I really didn’t have to remove all the intake stuff but the tube from the filter and I could maneuver the starter
Very Informative Video, I have a 3.5L. Do you know if the process is the same?
thanks and wish you can do mine for me lol
I hope I don't have to do all that
you don’t; this is the hard way to do it
I replaced it but my car just clicks repeatedly, not fast clicks but slow. what do i do?
You could have a bad fuel pump my guy. I'm not a mechanic by any means but I know that can cause it to not start. Check out Chris fix's video on how to fix a free car that won't start. Very helpful
mAKE sURE bATTERY iS fULLY cHARGED. nOT eNOUGH pOWER iN bATTERY tO sTART tHE cAR
There a easy way it's a Mexican guy lol he doesn't take all this stuff off and I just traded my start out to my car would just keep clicking I could boost it to turn on but it wasn't my battery Chrysler sucks for mechanic stuff it always has something wrong lol but anyway this guy shows you a hard way to do it but if you like this better than you can do this I liked not having to take the manifold off or throttle body
You can disconnect the battery under the hood. The wires just come right up and connect in wow.
You're making videos.
bro, i have a Sebring 2008 flex fuel converter, so this video is bs
Thats why you dont buy American cars. Even replacing the battery is a pain in the @ss.
+jackchan04 Thanks for watching our video! 1aau.to/m/Shop-TRQ