Toyota Sequoia,Tundra, land cruiser, lx470, lx570, gx460, gx470 blower motor replacement
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This video shows blower motor replacement on Toyota. Blower can be purchased from here amzn.to/2pWnTyd
Best motor oil money can buy.
I am independent AMSOIL dealer. bestautofluids....
Tags; ford, chevy, gmc, dodge, ram, toyota, honda, nissan, subaru, F250, F350, sierra, canyon, denali, 2500hd, 3500hd, savana, terrain, acadia, yukon, ss, camaro, corvette, tahoe, suburban, colorado, silverado, city express, express cargo, express passenger, tundra, camry, sequoia, cummins, caterpillar, navistar, duramax, powerstroke, tacoma, mobil, valvoline, castrol, pennzoil, amsoil, havoline, shell, royal purple, liqui moly, quaker state, lucal oil, motul, peak, kendal, 6.7, international, freightliner, kenworth, volvo, peterbilt, mack trucks, western star, bmw, mercedes, sprinter, transit connect, e150, e250, e350, f150, focus, fiesta, fusion, mustang, escape, edge, flex, explore, expedition, excursion, super duty, landcruiser. U660E, AB60E, AB60F, A750F, A750E, U151F, U151E, U660F, A340E, A760E, A760F, U140F, U241E, U340E
This video may contain affiliate links, which means that I may receive a commission if you make a purchase. This video is not sponsored.
Thank you for making the detailed video. This saved my family some money and time taking the vehicle in.
You are welcome
Let me add my thanks as well. My wife went over a bump in our 2012 Tundra, and then the fan started making a noise. I followed the video (and can confirm that it is the same procedure for a Tundra), and the fan/motor assembly was easy to remove as described.
I turned it upside down, and about 5 acorn shells fell out. Put it back together, and now is just as quiet as before.
Thanks for taking the time to post this video.
You are welcome. I have many other videos on my channel that I have done for 2012 Toyota Sequoia with 5.7 engine. Also, they apply to Toyota Tundra.
Much appreciated. I was able to replace the blower motor in about 10 min. thanks to the video. Otherwise I would have struggled to figure out how to get the fasteners off and may have broken them.
Thank you so much for making this video! I will now be able to do this myself for my 2013 Toyota Sequoia platinum.
You are welcome. Please subscribe.
Thanks, Dude!! Had an airplane propeller type noise when the fan was on high. Followed your video. Other than a difficult work position, your instructions were spot on. Mine is a 2016 Tundra, but worked virtually the same. Cleaned out the acorns from mice or chipmunks and it works fine now. Thanks again for posting the video!
You are welcome. Consider subscribing.
I already bought a new assembly, if I can find something stuck in the old one, I'll return the new one. I just didn't want to have to crawl up under there, take it out, find out I can't fix it and then find out they don't have one in stock.
Thanks a lot for the excellent video instruction. I am an 73 year old, occasional mechanic and was save over $200 on the dealership price for replacing a blower motor on a 2012 Sequoia. I took my time, used the video, a flat head screw driver, a stationary flash light, and inexpensive socket screw driver to do it. In less than 2 hours, it was done in spite of my inexperience with repairs of this type.
Bob Bretz, no problem.
Thank you very much for doing this video! My blower started making noise after I replaced my cabin air filter. With the help of your video instructions, I was able to pull the fan out and remove the dried out leaf that fell into the blower with very little cursing! :-)
You are welcome.
Just changed my blower motor on a 2008 and didn't have to do any of this glove box and trim removal. I just looked up from underneath it, unhooked the harness and unscrewed 3 t-25 screws, about 5 minutes. Then reverse the process approximately 5 minutes. Simple and saved hundreds of dollars
Someone must have removed the trim in the past and never put back
@@repairvehicle Might be. But it doesn't have any slots like the one in this video. It's definitely OK because I don't need a dust collector hanging under the dash anyway.
Man I love easy it is to work on this truck. I’m so glad I got a 2013 tundra
True!
I have ton of maintenance videos for your truck on my channel
Just for anyone looking LX570 and Land Cruiser part number is 87103-60481 and you have to remove the 3 screws on the parking computer to get it out of the way
Some additional info.. had the vibration for a long while, as people have talked about. When it got REALLY bad it would sound like gargling rocks for about 5 sec then stop. If I turned the ventilation off and then on again, it would repeat. I think it somehow overloads and then locks out till the system is reset. I was probably a year from the start of vibration till it finally died.
Can't wait to pull it to see how bad it is.
Thanks for the nice video. My 2010 Sequoia Limited had a weird vibration in the passenger side of the dash that I suspected to be the fan or an airbag issue. It made a strong vibration when the key was on even if the fan was set to off. The fan seemed to blow fine and turning up the fan didn't seam to increase the vibration. The vibration would actually continue for 20 seconds or so after the key was turned off. Being that I couldn't fix an airbag. I hoped for the easier fix and decided to try removing the fan motor per these instructions. Once removed I turned the key and the vibration was gone. I ordered a new motor and installed and it's as good as new. Vibration gone.
Note that my original motor had blue writing on it as well just like the one you removed.. My suspicion is that it's done in the factory, not that it's a replacement or used part.
No problem. Consider subscribing and share my video with others.
By the way. I have a lot of videos on my channel about Toyota Sequoia maintenance.
Very nice. Was a little concerned about working around the air bag. Guess it's not a concern. Going to do it tomorrow on my 2010 Sequoia Platinum.
Please subscribe and thank you for commenting.
Thank you very much for this video I Will change it Mayself in my 2010 Toyota Sequoia Platinum.....GOD bless you.
Thank you.
Thanks! Just fixed my 08 Tundra after watching. Something was caught in the fan and making lots of noise/stopping the fan.
You are welcome. I have other maintenance videos on my channel that will apply to your tundra. Please subscribe and click the bell.
Thanks man! On the dot and easy to follow!
I have more videos for this vehicle on my channel
Excellent video, I have a 2012 venza with less than 20,000 miles and the fan stopped working, cheap parts so disappointed in Toyota for this..
+Remember_Alf , thank you for commenting. These days every car manufacturer cuts corners so that they can make more money.
Great work. Fine video. Was very easy to do.
Thanks. Please subscribe.
Where is the resister on this car !! Please help been looking for hours
its not built into fan?
Well done. Is it the same part number for LX 570?
It should be, but double check
Hi buddy, my car is the LX570, 2011. My problem is that the accordion/Curved trap door that allow switch between outside air and re-circulation, is not working, it does not lift up when pushing the re-circulation button. How should I fix that?
Small servo motor might not be working
when i tried to replace mine. something shorted out and now the new motor does not work. could it be the resistor that went out and where is the resistor located??
Check fuses and if resistor failed it’s parts of motor assembly
@@repairvehiclethank you but where is it exactly?
@Erick-or3ot search for this “toyota sequoia fan resistor” and it will show you pictures of it
Great video! Thanks
Great, straight-forward video. Was afraid I'd have to pull the dash to get to it. Thank you!
Слава Украине!
Героям слава!
🌻🇺🇦🌻
От США с любовью и надеждой.
One thing never use tundras motor it is black with the same electrical fitting it will blowout your fusible link, I learned that the hard way
Why?
two. one in front and other in the rear.
Thanks so much for posting this video. Super helpful!!
Superb Seats, you are welcome. Please share my videos with others if you don't mind via Facebook or any other means.
Great video, thanks for sharing!!!
very good job thanks
спасибо
thanks to you brother
Thank you helped a lot
Thank you for this video.. excellent video...made my fix go very easy..thanxs again.
You are welcome. Were you doing this for tundra or sequoia?
repairvehicle 2014 Tundra
+USA Go RV , please consider subscribing. I have 2012 sequia which is same thing as Tundra except for the body. Same 5.7 engine, transmission and transfer case. I have done many videos on maintenance and are available on my you tube channel. If you don't mind please share my videos with others. Thank you.
repairvehicle I will subscribe and by the way what cost me $8.00 would have cost me $325.00 at the dealer when I explained the problem.
it works great and the A/C at high sounds like a faint hum. Thanxs.
+USA Go RV , good. Glad to hear that I saved you money. Thank you for sharing.
0n my 2012 Sequoia. The fan only runs on low for everything but defrost then it runs on high. What part do I need to replace. I cannot find the blower motor resistor. Where is it located?
Have you tried turning fan manually instead of Auto?
Is ki cost kia hogi
Thanks for the useful video. I am going to try it
You are welcome. Please subscribe and share my video with others.
What do you have, tundra or Sequoia?
repairvehicle I have a 2010 Seqouia. Yesterday I made it. Success!!
Thanks again
repairvehicle Done!
You are welcome. You saved yourself a lot of money by doing it yourself. By the way, I have other maintenance videos for Sequoia on my channel.
how many plower in seqouia
Is this the same for a 2007 Toyota Tundra as well
Should be? Double check with the link in the description.
Blower motor can be purchased here amzn.to/2CWFFTL