Wow, couldn't believe the amount of flexing with the stock servo in the stock mount. Reefs made a big difference. I'm starting to collect up my electronics for the when I get the roller. Thanks, informative little video.
I have been looking forward to seeing videos on the treal servo saver before i buy one. I upgraded my upper links to treal stock ones seems to go sloppy fast
Update on my Treal saver: I used the screw to cinch it down all the way onto the Raw 500 and it went all the way. Almost too far! It didn't take much effort to screw it down but I'm not looking forward to taking it back off!
yeah mine was not going on with the screw, it was like not feeling right and was afraid to strip the screw head. I used it and it did not hold up so I have to figure it out before my race this weekend. Thanks for the update.
I've got the same setup (almost). Waiting on the Treal servo saver to get delivered. It got to California from China faster than its getting to my house. USPS is getting slower and slower. I sure hate you had trouble getting the correct fitment. Mine will either fit all the way or I'll figure something else out. Reply back with any new developments on this issue. Thanks!
Yeah it is keeping me up at night lol. I think I could tap it on with a hammer, but really a hammer to a nice servo horn and servo. Not something I am keen to do. I def need to figure it out. Thanks for watching.
Tell us you raced the kid on the bike!? Been thinking about picking up a Reefs servo. I have one of the nicer savox (forgot the model number) in my rustler it was a big steering a big improvement. Looking at putting a Reefs in one of my crawlers. Keep up the content.
lol he was super focused and he was learning so I stayed away. Reefs servos have been my go to now. I like savox but reefs are quiet and have held up for me. If something goes wrong I will for sure report on it.
@@cwatson42785 I ordered a treal for mine bad landings will snap the Kimbrough I run them on the ryft now the bigger tires and weight of the lmt is murder on those savers lol
Do you have stickers or anything with your rc name. I got into crawling because of your channel. I started by just buying a scx10 chassis slowly building
@@cwatson42785 wrong buddy my lmt is a rave truck. Runing nitro pro servo that's bulletproof! And the stock plastic arm acts as a servo saver with a metal servo arm
With a plastic tie rod and drag link you don’t really need a servo saver fyi. I run a pro modeler 630oz/in brushless servo and it’s great without a saver and has steel steering links.
Thanks for sharing your experience with the Treal servo saver.
Wow, couldn't believe the amount of flexing with the stock servo in the stock mount. Reefs made a big difference. I'm starting to collect up my electronics for the when I get the roller. Thanks, informative little video.
Yeah really love the reef's servo's
The stock servo was filmed with only half the screws installed...
I have been looking forward to seeing videos on the treal servo saver before i buy one. I upgraded my upper links to treal stock ones seems to go sloppy fast
yeah something I will upgrade as time goes on
Update on my Treal saver: I used the screw to cinch it down all the way onto the Raw 500 and it went all the way. Almost too far! It didn't take much effort to screw it down but I'm not looking forward to taking it back off!
yeah mine was not going on with the screw, it was like not feeling right and was afraid to strip the screw head. I used it and it did not hold up so I have to figure it out before my race this weekend. Thanks for the update.
Did you have the servo? maybe 23T instead of 25T?
🤙🤙🤙🤙🤙
🍻🍻
Looks good that is a nice servo and saver
🍻🍻
I've got the same setup (almost). Waiting on the Treal servo saver to get delivered. It got to California from China faster than its getting to my house. USPS is getting slower and slower. I sure hate you had trouble getting the correct fitment. Mine will either fit all the way or I'll figure something else out. Reply back with any new developments on this issue. Thanks!
Yeah it is keeping me up at night lol. I think I could tap it on with a hammer, but really a hammer to a nice servo horn and servo. Not something I am keen to do. I def need to figure it out. Thanks for watching.
Tell us you raced the kid on the bike!?
Been thinking about picking up a Reefs servo. I have one of the nicer savox (forgot the model number) in my rustler it was a big steering a big improvement.
Looking at putting a Reefs in one of my crawlers.
Keep up the content.
lol he was super focused and he was learning so I stayed away. Reefs servos have been my go to now. I like savox but reefs are quiet and have held up for me. If something goes wrong I will for sure report on it.
Hello bro
New subbie from Indonesia👋
Greetings one remote from Indonesia👋
Nice video bro very informative 😍😍
sweet. 🍻🍻
That’s all as far as mine goes on too, I’ve had no issues
I did wind up getting it one right. I bent a screw and then decided to just bang it down so it was on all the way.
What servo do you recommend for a LST2 NITRO??
Not sure what specs you need but look at speedtekrc.com
@@RCPropaganda thx
A Kimbrough 124 heavy servo saver all plastic never a problem
This set up is still going strong. Used it all race season. I did bend the servo in a serious burn it down free style. Thanks for watching.
@@RCPropaganda cool
@@rcjoe406 I have the Kimbrough too and was thinking of getting the treal saver but maybe I'll wait for the Kimbrough to wear out before I upgrade.
@@cwatson42785 I ordered a treal for mine bad landings will snap the Kimbrough I run them on the ryft now the bigger tires and weight of the lmt is murder on those savers lol
@@rcjoe406 Ah I see! OK treal is getting ordered tonight lol. You were so confident in your Kimbrough saver too! 😆 jk bud!
Do you have stickers or anything with your rc name. I got into crawling because of your channel. I started by just buying a scx10 chassis slowly building
Yes I do.
@@RCPropaganda I’m stationed in Georgia
What’s a contact number
Is that a 25 tooth servo saver?
Yes
U don't need a servo saver for racing just a regular servo arm
You need a servo saver when running a $100+ dollar servo bud. You're not gonna risk the servo to save 20-30$
@@cwatson42785 wrong buddy my lmt is a rave truck. Runing nitro pro servo that's bulletproof! And the stock plastic arm acts as a servo saver with a metal servo arm
With a plastic tie rod and drag link you don’t really need a servo saver fyi. I run a pro modeler 630oz/in brushless servo and it’s great without a saver and has steel steering links.
👍👍