Now that it is more air tight I would carry my gasoline in the back of the truck, never know when a can will spring a leak. Before they had plenty enough fresh air to offset that before the glass
I also was thinking of carrying oils and gas, any nonlife friendly items in the back of the truck. Also I would consider chainsaws in the back of the truck. But I know Jim wants convenience and easy access. Either way , I know Jim will do it in a sensible manner, but yes, this is my thought also. The horses get upset if smelling spilt gas but I yield to Jim. :-)
It looks great. Mice will get in, unfortunately. You could use a metal garbage can for your feed, and just pour it in. If you had the boards all the way up, he might not have enough room. It might be a little clostraphobic for them.
Jim, I think you have been very through and detailed on getting your new horse trailer set u. Great job😀👍. Can’t begain to tell you how much I have enjoyed watching and sharing this with you. The screws are surprisingly strong but like you, I would put bolts through sigh a washer n but on the outside as I know that would hold . Thanks for sharing and hope you have many hours ahead to enjoy n use the trailer. With three horses in the woods will you keep the third inside the trailer or tied outside - probably depends on the weather
Noise reduction with glass rattle could u use sponge inbetween the upright and glass , would still move but not rattle , putting wood to the top I think would restrict Bill's view out as he seems to look more out the door glass than the side, other than that I think where you have stored table and chairs I would have made a sleeping area aswell for nights out ??
On the GOOSNECK portion of the storage that you’ve made. I would spray the bottom portion with Bed Liner. Or line it with a plastic mat. It will toughen up the bottom. Quite the awls from rattle and slide around . It’s hard to keep mice out. But, the comment about the metal trash can with lid sounds good. Good luck with your decisions. I enjoy watching
It makes me happy to see how happy Jim is. You've done a great job with your mobile office and you should be proud! The horses are patient and gentle, with a patient and gentle leader. A great team!
the trailers certified now There's that green environmentally friendly manure. That top board there maybe I'd sand it and make it more round on top so maybe no splinters just a thought.
That's what we used. It also had the advantage of being lockable to keep our escape artist horse from getting into the grain. We actually caught him pawing the locked hasp off the feed room door!
I would use a large plastic container with a good lid it’s light when empty and no mice can get in. It’s a great trailer it will make a big difference when you are working in the woods.
round metal trashcan = smaller foot print and mouse proof. Hang harness on door that swings out? any excess line or harness falls into a box attached to bottom of door? permanent camera to monitor horses, looking good Amigo!
For hauling your third horse on your wooden wall, I would consider upsizing your boards to the full 2 inch thickness because in emergency braking, he may hit that wall hard enough to break the top three boards. Just a thought I would use full sized 2 inch if it was mine. Also, your screws I think bouncing down the road over a period of time your chainsaws are going to pull loose, but I wouldn’t change until they do. Good job
Jim my only suggestion I would leave the grain in its bags but I would definitely put a cover on the tote or you will be feeding a lot of mice. I want to thank you for the bailing twine idea, that stuff is a lot like duct tape with all the possibilities it has. The horse all look at home in the new trailer, i might put 1 more board in the bulkhead just so Bill can't get into any mischief
On the partition wall, you might want to router the top board so no splinter can't get lodged in the horses neck. Also,,,, Bill's looking at all that grain & hay and thinking,,,, is all of that mine?
2nd Note: From my years of work in show jumping ... I always installed lights (2) on the rear roof close out panel and also high on the passenger side (tie downs). These were invaluable for operating at the show grounds. I also had a dressing room / tack room and installed a light above that side (like your big side door). If you install these, you will see they are magnificent for backing up at night and for loading and unloading the horses in the dark (which I assume happens even in the woods). When you have these lights, they quickly transition from "nice to have" to "have to have". They don't have to be expensive lights. Just a broadcast light fixture available at Tractor Supply and online. Also, you don't have to wire the backup lights to the truck backup circuit, or even inside the truck, however that's a great convenience. Just remember ... all those lights (while easily operated by your alternator) are powered by your truck battery which should be left running until you're ready to power down.
@@sueupham2519 WARNING: One evening, I actually had a lady as me to stay a little longer at the showgrounds so she could put all of her equipment away while using my lights (she was next to my trailer). Also, a word of caution, if Jim mounts these lights he needs to consider guarding them from branches and the like. He will never regret installing them.
hahahaha that was a quick trott,, Bill...all was well done, we're all proud of you guys,and your parents would be too...#1,,garbage can for grain,box for paper pad and pen, paper towels,tissues,and a 5gallon pail all up in the back.with garbage bag,,I would probably shave off the hickory board smooth for bill's neck..they rode so good and your tools too..might wanta put some parts in cubby for skid steer,extra tires for trips...in all we love how you got the windows done for winter warmth.everythings looks great even mats cut perfectly...NICE !
Looks good. Great organizing. 🙌🏼 A couple of concerns . At the 7:51 time, the hook/handle to open the middle partition is right beside the tie latch ; concerned horses might catch their halters on it if they try to rub up against it to give themselves a scratch. 2nd concern; couldn’t tell if you had a low tote or tray under the oil/gas containers, easier to pick it up to clean it if you have a tray/tote. Not sure if I would carry the gas containers in the trailer because of the fumes, might agitate them. I don’t remember in any of the other videos I have seen you put the gas containers in the trailer. Nice for the horses to see out🙌🏼 Enjoy your new trailer, the convenience and comfort it is going to bring you folks and the horses. 🤠🐴🇨🇦
Mice and rats get into everything, it is said that a mouse can get through any gap as small as the diameter of a pencil ! If you are concerned by the strength of the screws in the aluminium, you can mix up some epoxy glue and apply that to the threads of the screws and then screw the screws in and they should remain nice and tight. I think you did a great job with the trailer and the baling twine is sufficient for the job.
I like how you have it setup for Hauling the Horses. And how you have all your equipment set up on the board wall. And all the water and Feed Also Very Nice Setup You have There Plus see through Windows 👍 As the Smile on your face dictates you Like it Too Awesome Job Jim . Glad the test Drive Went Well. It doesn't sound That awful Loud Too Me Either. ✌️
Is it just me, I think Jim is very pleased with his new trailer. Jim you did a great job with the trailer. And Brenda as always another great video. Thank You both.
You were talking about your 'd' rings inside the trailer for tying g your horses to . Here is what I would do if it was my trailer. I would take a small piece of mild steel flat stock drill a hole through it so a bolt would fit , drill through an upright stay where you want to tie off. Then using a large washer on the outside , that way there is enough structure so if something should happen the metal should not fatigue as easy. LOVE your show I learn LOTS
My 4-H years showing cattle, we found packing the show animals together, side-to-side, fairly tightly, made for a more stable ride. Even in a large truck, a loose load that shifted on the turns resulted in a dangerous ride. I agree with the metal garbage can. I keep my dog food in one, in my garage, and never a problem. The excitement in your voice, Jim, was like a youngster with a new toy. 😁😁
Nice job on the trailer. I finally have a suggestion. When I was very young, maybe five or six, my dad taught me how to braid baler twine. ( 3 strands). I spent a lot of time in the barn, making “baler twine rope”. As you said, baler twine is very strong and when it’s braided, it looks really nice. We used it for everything. Once in a while, we even twisted two together and put a little tape on each end. They look really nice. I know what you’re thinking Jim, “ as if I had time to spend braiding baler twine “. 😊😊😊
I did the same thing, @Henry DeYoung. Sometimes they were very long when finished. In the last 8 inches or so braid the next pieces in with your current three and keep going. Very strong. Once I braided three long braided ropes together. Made a strong tow rope. 😁 Baler twine and duct tape, fix lots of things.
Being able to hang his head over that top board gives the horse a firm point to aid in keeping his balance while on the road so I see it as beneficial. Aluminum screw threads are always a background concern since they're so weak, and you could use toggle bolts instead as a more secure fastener for the pad eyes, but I agree that the baling twine will break before the screws come out unless they get loose and wallow out over time (that's probably the time to install toggle bolts). Of course mice would get into an open bin to eat the grain and also soil the bin. They're relentless.
1 horse in the back and 2 in front of your wheels will give you better weight distribution. That's the only thing I would do different. Looks great and may God continue to bless you.
Yes put a cover over the grain container. Mice will get into it. I'm not sure but you might want to be able to take some of the plexiglass off or open some how to allow air to vent out in warmer weather. Otherwise your trailer looks great 👍 Looks very comfortable for the horses. Great rig.
I think mice will get in but ince you find that lid it will be easier having your grain loose in the tote. Brenda, he does love his set up doesn't he :D very tidy and well organized. I love spending my morning coffee with you guys have a good day! PS: I like the thinner rope in the trailer...they likely already know how to behave in the trailer and don't need the strongest tie and I agree, in an emergency you'll more quickly get them out
Hello from Australia. I love your show. I have 2 Clydesdales. One is harness trained. An old mare called Jess. She's 22 and tough. Lady is like her, reliable and steady. I use an a small forward facing float. I only carry one horse at a time. She fell over on the slippery floor. Her head was jammed on the front bar and I was able to loosen the rope to quickly release her. Fortunately I had greased all the pins holding the chest bars and partition so I was able to remove them easily. Unfortunately she couldn't stand in the small space. She was facing the side door that is less than a metre wide. Her feet were half over the door way so I decided to see if she could get though. She managed because her hips are narrow. Her belly is fat but her ribs are flexible so she managed to bounce her way side to side. No injuries. After this I glued carpet to the floor which works well. The whole incident made me realise you have to imagine this happening to your horse and come with a plan. Including carry a good knife and tools.
You need a lid for the grain, the darn mice will find. The twine is just fine and I think your smaller tie rings in the back will last along time, all of your horses are tied a lot and none should sit back enough to damage them. I think the partition is good the way it is. Looks great
You definitely need a cover over the oats. I would leave the oats on the bags that way it’s easier to fill them and put them in the tot. Very nicely done!
Fine job. Not excessively noisy. The horses seemed quite comfortable and relaxed. I agree with the comment on mice. Use a galvanized container with a tight top. I'd keep the feed in the bags and put the bags in the metal garbage can. Raccoons and squirrels will chew throughput plastic and rubber and get in. I suppose mice could also. However, metal cans can collect moisture and develop mold in the bottom of the can. As long as you keep them clean I suppose it doesn't matter, however, I have always had trouble with plastic or rubber containers. Maybe Michigan squirrels and raccoons are more hungry than out east? LOL
Wow!!! You’ve done a great job on remodeling your horse trailer!!!!!! You are loving it, and the horses ride so easy, have a good evening with your family
For your horse tires on the inside the Braided Hay twine, will do an adequate job because your horses are so well mannered. I have Belgians also and I use the five eights cross ties and we break him all the time because sometimes my horses are bad, but your hay twine on your clip will probably work better than anything on the market
A metal garage can sounds fine, but make sure that you use everything out of it, before you add more, since that definitely attracts the mice. On your inside brackets, I wouldn't be concerned about the mounting, but the small triangular pieces. I would make that they were welded and just pressed together. The jerking or movement of the horses while riding in the trailer could open that little triangular piece. Jim, my wife usually comments on here, but I thought I would after watching this video. You have done a great job, and you obviously care deeply about your horses. They will love their new chariot. Take care, you all are great!
I had fun getting to ride in back with the boys!!!❤ I think they enjoyed getting to look out at the scenery! You can have a camera put inside your truck that monitors inside the trailer. Kinda like the backup cameras on new vehicles and some people get them installed even on older vehicles. But you can have cameras inside the trailer too so you can monitor the horses. Love how you arranged your tools in the front of trailer! Be sure to put a first aid kit in there...hopefully won't ever need it, but nice if you did. Extra gloves and safety goggles maybe. When I had my Dobermans, I stored their 50-lb bag of dog food in a round container especially made for pet food I'd ordered online, but somewhere like Tractor Supply probably has large breed food containers with snap-on lids (may be in their large dog supplies).
Good idea, also maybe a fire extinguisher. Does not sound important unless you have ever needed one handy, which I have..., in my life, more than once. 1st aid kit, great idea. Otherwise, looks good.
Love the new trailer, regarding the mats, I had trouble keeping them in place, so I put a few screws in the rear mat. Really nice set up. I think I would build a feed box, with a lid that can be locked, I know you are very Proud of your new rig. And I really like the windows. Thanks for Sharing. 🐴🐴🐴
Just for your consideration ... On my Race Cars and UTV's, I place a thin layer of neoprene about 3/4" to 1" wide between the polycarbonate (good choice) and the metal. Left against each other, the polycarbonate (expensive) will chafe and sometimes crack, especially with cold weather. Unfortunately using the product (3M in roles is awesome) requires you to place it on the entire periphery of each panel. If you elect this, you won't be disappointed.
If they crack, you have acrylic, not polycarbonate. Polycarbonate will not crack. Even hitting it with an axe on the side you cant break it easily....I tried
@@Nordic_Mechanic I'd heard that too so I produced my own polycarbonate windshield for my Yamaha Rhino. It cracked from the mounting holes. Adhesive foam resolved the problem. I have a poly carbonate windshield on my AC Cobra made by a manufacturer that warrants against cracks. So far, so good.
@@richardgreen7811 I know a polycarbonate windshield manufacturer and get off cuts pieces. Never had one break even folding them in half and into a press break to make brackets and such. I like to warn people that a lot of inferior material is sold as polycarbonate and it`s a safety hazard.
Nice video Jim and Brenda, Jim I would cover the grain , I would use a metal grain bucket or trash can for sure, love the trailer and the way you set it up . Oh nice mats for the flr. I am sure the horses will love 💘 there new trailer. Jim just my thought, but I was thinking about a little air flow in the trailer.
Foam pipe insulation will tuck into the gap the narrow wall boards have left in the slot to keep them from moving or rattling around - and easy to remove when you want to take them out.
It all looks well done. The feed tub, you might make a utility storage wood box, hinged lid, sit in the corner, then place 1 or 2 metal trash cans on top ofutility box. . Hooked to wall and corner. Bungee the metal lid. It’d elevate the feed barrel’s a little, less bending down . And a bit of Mouse proof storage. Great window viewing for horses. 🙋♂️🐈🐈
The feed bags - keep in tote. Use a strong clip(s) to keep them closed. Mice will go wherever they fit - so it wont be mouse proof, unless in metal bin with lid. About the tie-ups. A well trained/calm horse would do just dandy. Those look like (for those big Draft Puppies) They will break or tear off during an extreme situation. Maybe good....maybe not. Horse First Aid supplies (people too) Maybe an EDC bag stashed someplace. And perhaps pad, or round off the edges of the top of the Partition where Bill goes in the trailer - Its throat height. Those straight edges look sorta sharp. Me, Id put Shipping Helmets on - But Not everyone does. Beautiful trailer. 👍
Jim at the 21:43 min mark in video the horse you put up front can stick his head above the top board of your wall. Maybe you should take top board out incase you hit a bump in the road and the horse hits his bottom jaw on it and could get hurt pretty bad. Or put one more board high so he or she can not stick there head over it. Good job fixing up trailer by the way. notice the gate the trail company put in they can not stick there head above it. After seeing him trying to move you may need to take a board off or he will be to big to move around in the little space you have him in
I like the setup. Opens door 3 nice Husky saws. 😍. Maybe a hook for your work gear to hang up unless you leave it in the truck with your lunch and first aid kit. Great video again 💪
I would suggest insulating the roof of the trailer. In the summer it really helps with the heat and moisture. I agree with the binder twine. The insulation might also cut down on the noise. Great job on the arrangements in the front. I like it very much 👍👌
Have you ever tested the trailer for carbon monoxide from the truck exhaust? Now that you have the windows covered, there may not be enough fresh air for the horses. It is just a consideration. I remember when I was in high school many moons ago, when I rode in the back of the school bus, I would get headaches from the CO in the exhaust seeping into the bus. You might be able to get a battery operated CO monitor for the trailer. Keep in mind that CO is lighter than air and will collect in the upper part of the trailer where the horses breathe. Since CO is odorless, it may not be noticeable. I wonder if other have had any experience with this.
This is serious business and very dangerious because not understood. I know many, or at least a few People that have died from unforseen circumstances related to this, always good to consider these things. Life of death! Very good. . Yep, the horse head up high! Well said my friend.
Horses enjoyed looking out thru plexi glass ...maybe Bills halter lead a little longer so he can stretch out...seemed a little tight...other wise happy horses ...nice work..👍
I knew a guy back in the day who used to braid the twine in to all kinds of stuff. I have used it to lead a hard to catch one or tie I off into reins on the halter and go bareback. I have used it to make temp repairs on a whole lot of things
Use the grain bags in your tote Jim. That way you will never be dumping fresh grain onto the remains of old grain in your tote. With my alpaca grain, I open a new bag and tip the remains of the old bag on top so it gets used first. Really enjoy your horse and equipment explanations.
Very nicely done & efficient on saw and tool storage. I agree with the others on covered grain storage. A metal trash can will hold your bag of grain or smaller container with a lid to pour a few days worth of grain into. Use your twine to tie them. Breakaway ties in a trailer is a good idea.
My thoughts on the trailering. In general, I think it’s such a nice improvement over what you had before. It looks so great. I just have a few comments and suggestions. About the wood partition up in the front where you have Bill. I’ll think you need that extra room for the horse to be able to put their head over. Don’t extend it to the ceiling. Otherwise that horse up there is going to be so cramped that they won’t even be able to stand straight with their head out in a normal position. That will make them pretty sore. You are absolutely correct in thinking about what you tie them with being able to be cut quickly or simply break if they get in a bind. The last thing you want is to have a thrashing horse down or if you get in a trailering accident and flip the trailer. And then have a horse that you can’t get close enough to without getting hurt yourself. You want them to be able to break whatever they’re tied with if there’s a wreck of some sort. I still think it’s a little risky trailering with two big horses in the back and no horse up front where Bill was today. Once you get up to any kind of speed, I think it’s going to be really easy for that trailer to get fishtailing and cause some trouble. I think you’re going to have to put some snug fitting cover on that grain bin or you’re going to attract rodents. Great set up. I’m so happy that you have a trailer that will make your life easier.
Watched this with my sister. We both liked what you have done. But she noticed the roughness of the top edge of your top board. She suggested you sand it a bit to prevent splinters for you and the horse.
Looks like a real nice setup for what you're doing!👍 The only suggestion I have for you is to pull the floor mats at least once a year to clean the aluminum floor. I have a Feather Light and wish someone had given me that warning ⚠️
On the side where you are keeping the extra cant hooks and wedges, you could put a hook on the wall for Brendas' hard hat. The sawdust on the floor will make it sooooo much easier to keep the floor clean after the apples fall. Big horses have big butts, it is a fact of life, not to worry. My only other though was that the side access door should have been on the passenger (right) side of the trailer.
That's a fantastic trailer! I like the idea with the boards, so if needed you can snap in another one. Before you started driving around I was thinking that your chainsaws will swing around and that the windows will be quite loud, but it turned both out to be quite calm. If it is still too loud maybe you can use sponge rubber strips between the glass and the aluminum. With screws in aluminum I have always made bad experience, I would make a bolt through the whole wall. Is there a light in the trailer? If not that is something I would suggest to install. For the grain, a good idea might be some kind of metal box that can be closed, to avoid the mice and rats go into the trailer. The explanation with the yarn and that you can cut it in an emergency is really plausible. I think I'll take over that for myself! -Chris
The low wall looks great and it seams like Bill gets a little more room when he puts the head over it 😍 Hooks on the grainbuckets makes it easy to hang then. Great job!
Look forward to each video. Each video is quiet unique. Love what you did to the horse trailer. Now a pooper scooper, bucket. Save the fertilizer. Maybe add some removal windows to plexiglass so in the warmer or hot days they have the wind on their faces. Maybe set up a camera all the time you could check on them for long trips. Live stream Horses like the truckers in their convoy to DC, on long trips. Hours long they got a lot of super chats, people loved it. Do they need snow shoes? Good practice run. The whole time I was wonderful where will you put their harnesses, Bridles, and blankets when you don't need them until you get some where. Maybe you won't need them for a couple hours? Like pulling contest. Thank You!
We enjoy watching the horses work.They are beautiful.I think they like the new trailer.It's a real nice trailer.Maybe to quiet the noise with the plexiglass, you might put small amounts of silicone around the top and bottom of the plexiglass.we can't wait to see what you and the horses do next.
Do you carry spare halter(s), lead lines, double ended snaps, hoof pick with you that can be kept just for the trailer? When I pleasure drove competitively we carried what was called a spares kit. A hole punch, either a spare rein or rein splice, leather laces - so if a rein, trace or other part of the harness broke, we could repair, wheel wrench, pliers, pocket knife. I think there were a couple of other items required for pair & 4-in-hand turnouts. I had all the tools secured in a small kit, with the halter, lead line & a light weight horse sheet as well. I kept a kit in each my carriages all the time, as I loved driving on the road & on trails in local parks & it gave me peace of mind knowing I was prepared for most any situation. You might consider a first aid kit, with you chain sawing in the woods, it would be a good idea. I like what you’ve done with the trailer. If you or a friend does any aluminum welding maybe consider welding large “D” rings to the inside post for securing the horses. There are trailer ties available that have a quick release snap that is great for an emergency, slight tug & horse is free, without cutting the line. Most are adjustable in length so the horse is safe & comfortable. I love watching your videos & how you train your horses! I’ve not been able to drive since ‘09, different medical issues keep happening, which have made even being in the barn a challenge. I’m down to my last Norwegian Fjord - a 23 yr old mare, she’s a sweetie , that I would love to drive again. But for now she’s a out to pasture. Thank you for all you share. God bless!
Thanks for sharing your tralior, Jim ,Brenda, it's looking good , a couple off things you need a tube with a lid on it for your grain , those rats and mice with love the open bags , the set up with all your tools and fuel , oil ect looking great , good idea easy to get too , iff you have trouble with those bolts screwed it the wall were you hook those horses too ,maybe try drilling them out and put nutserts and screw threaded bolt into them , they tralior ride was good the horse were looking around , good they can see out Jim , if you have trouble with the perspeces making to much noise put a dob off silicone between it and the metal, ok have a good day too you all cheers from Australia 🇦🇺
I had to chuckle at your video mishap and us viewing the backside of Ken…of course he has a big butt Jim because he’s a big horse. All kidding aside, I so enjoy watching all the different personalities of your horses but I do have to say I’m thinking Bill wants to do EVERYTHING in one speed…FAST! Seeing him bolt out of the trailer was quite a display of that need for speed. I hope he survives being mated with other horses during Lady’s “maternity leave” because I’ve heard and seen how he handles the separation from her when she was being pared with Baron. How do you feel all the horses will respond to a new colt on the farm when Lady foals? I’m anxious to see how Lady takes to mothering too. Exciting spring coming! And just a quick comment on your new horse trailer…I’m as happy for you as you are Jim!!!:):):)
That was fun! and I think the idea of leaving the top boards off the patrician is a good idea. Bill kept his head over it most of the time and it gives him a little more room head wise to gawk around and look out the window etc. So looks like everything is working out the way you have it planned. right now. The only thing that comes to mind is for summer hot temps is there any fresh air coming in to keep them a little cooler.? maybe design some kind of window to open where the plexiglass is? or in front where the over hand and tools are to get some air in there etc. that's my 2 cents worth great job Jim and Branda thanks for shairing ECF>
If you look back on some of Jim's videos from during the summer months when he had the old trailer and the horses out and about, you can see that he had the top boards out of the side windows of the trailer to get air flow for the horses. I bet he will do the same thing in this one as well. Seeing how he said that it was really easy to install the plexi-glass, should be easy to pull out for airflow in the hotter months.
Good planning Jim. You are right about the mice. Wherever there is grain there will be mice. The more secure the grain the better. Thank you for sharing.🐴🐴🐴
I think the additions you made to your trailer are great. Nice use of available space for your supplies and the needs of your horses. Very impressive all the way!
Just enjoy your videos with horses so much. So descriptive and the camera in the trailer..well I love the smell of fresh manure and horse. Lol. Keep up the good work.
When I worked with beach donkeys, the owner used a cattle trailer, the donkeys did not like the partician gate in between them and would not even go near it,so it was never used, but we had one donkey if you told him to push the others up in the trailer he would do, so that we could get them all in.
Love the set up, the placement of items, the baling twine break away ties, and I must say, a metal can is more better than a plastic tote and you can dump your grain in it without any issues. Now with you being active in pulling contests, you might want to get some harness hooks that you can take off when not in use and put it back on when you do go to events. Other than that, great idea. Be sure to give a bit of gap in some of the windows since horses during cold weather would create condensation inside the trailer unless you do have vent slots.
Foam strips between plexi and aluminum will make it quieter yet .
Now that it is more air tight I would carry my gasoline in the back of the truck, never know when a can will spring a leak. Before they had plenty enough fresh air to offset that before the glass
I also was thinking of carrying oils and gas, any nonlife friendly items in the back of the truck. Also I would consider chainsaws in the back of the truck. But I know Jim wants convenience and easy access. Either way , I know Jim will do it in a sensible manner, but yes, this is my thought also.
The horses get upset if smelling spilt gas but I yield to Jim. :-)
Inflatable mattress for multiple day horse pulls...
A bumper over the top board to protect in an emergency stop.
It looks great. Mice will get in, unfortunately. You could use a metal garbage can for your feed, and just pour it in. If you had the boards all the way up, he might not have enough room. It might be a little clostraphobic for them.
Jim, I think you have been very through and detailed on getting your new horse trailer set u. Great job😀👍. Can’t begain to tell you how much I have enjoyed watching and sharing this with you. The screws are surprisingly strong but like you, I would put bolts through sigh a washer n but on the outside as I know that would hold . Thanks for sharing and hope you have many hours ahead to enjoy n use the trailer. With three horses in the woods will you keep the third inside the trailer or tied outside - probably depends on the weather
Noise reduction with glass rattle could u use sponge inbetween the upright and glass , would still move but not rattle , putting wood to the top I think would restrict Bill's view out as he seems to look more out the door glass than the side, other than that I think where you have stored table and chairs I would have made a sleeping area aswell for nights out ??
On the GOOSNECK portion of the storage that you’ve made. I would spray the bottom portion with Bed Liner. Or line it with a plastic mat. It will toughen up the bottom. Quite the awls from rattle and slide around .
It’s hard to keep mice out. But, the comment about the metal trash can with lid sounds good.
Good luck with your decisions. I enjoy watching
first aid kit for you and the horse's
It makes me happy to see how happy Jim is. You've done a great job with your mobile office and you should be proud! The horses are patient and gentle, with a patient and gentle leader. A great team!
the trailers certified now There's that green environmentally friendly manure.
That top board there maybe I'd sand it and make it more round on top so maybe no splinters just a thought.
I like the metal trash can best. Strapped it in the corner -lid stays on better, it won’t break if bumped in cold temps. No rodents get in.
It’s been really nice following Jim, all his videos are amazing and full of useful information
I’d love to know you better John, thats only if you dont mind cos you seem to be a very nice person with a great sense of humor
terrific job Jim, a small chest freezer that no longer works for grain might be something to look at their light and no mouse problem
agree
might not want that extra weight though...can is lighter
That's what we used. It also had the advantage of being lockable to keep our escape artist horse from getting into the grain. We actually caught him pawing the locked hasp off the feed room door!
I would use a large plastic container with a good lid it’s light when empty and no mice can get in. It’s a great trailer it will make a big difference when you are working in the woods.
@@ellencarver5575 mice can chew through plastic with no problem
Some people use a metal trash can for their feed. I think you should put a big "Working horses with Jim" decal on the front side of trailer...lol
round metal trashcan = smaller foot print and mouse proof. Hang harness on door that swings out? any excess line or harness falls into a box attached to bottom of door? permanent camera to monitor horses, looking good Amigo!
Those horses have so much trust in you, great handling Jim..
Billy Boy seems to like the windows.
U should have a place for the harnesses
I think they really like the new windows
For hauling your third horse on your wooden wall, I would consider upsizing your boards to the full 2 inch thickness because in emergency braking, he may hit that wall hard enough to break the top three boards. Just a thought I would use full sized 2 inch if it was mine. Also, your screws I think bouncing down the road over a period of time your chainsaws are going to pull loose, but I wouldn’t change until they do. Good job
Jim my only suggestion I would leave the grain in its bags but I would definitely put a cover on the tote or you will be feeding a lot of mice.
I want to thank you for the bailing twine idea, that stuff is a lot like duct tape with all the possibilities it has.
The horse all look at home in the new trailer, i might put 1 more board in the bulkhead just so Bill can't get into any mischief
On the partition wall, you might want to router the top board so no splinter can't get lodged in the horses neck.
Also,,,, Bill's looking at all that grain & hay and thinking,,,, is all of that mine?
2nd Note: From my years of work in show jumping ... I always installed lights (2) on the rear roof close out panel and also high on the passenger side (tie downs). These were invaluable for operating at the show grounds. I also had a dressing room / tack room and installed a light above that side (like your big side door). If you install these, you will see they are magnificent for backing up at night and for loading and unloading the horses in the dark (which I assume happens even in the woods). When you have these lights, they quickly transition from "nice to have" to "have to have". They don't have to be expensive lights. Just a broadcast light fixture available at Tractor Supply and online. Also, you don't have to wire the backup lights to the truck backup circuit, or even inside the truck, however that's a great convenience. Just remember ... all those lights (while easily operated by your alternator) are powered by your truck battery which should be left running until you're ready to power down.
we feel like a trip to Tractor Supply today..😄
@@sueupham2519 WARNING: One evening, I actually had a lady as me to stay a little longer at the showgrounds so she could put all of her equipment away while using my lights (she was next to my trailer). Also, a word of caution, if Jim mounts these lights he needs to consider guarding them from branches and the like. He will never regret installing them.
hahahaha that was a quick trott,, Bill...all was well done, we're all proud of you guys,and your parents would be too...#1,,garbage can for grain,box for paper pad and pen, paper towels,tissues,and a 5gallon pail all up in the back.with garbage bag,,I would probably shave off the hickory board smooth for bill's neck..they rode so good and your tools too..might wanta put some parts in cubby for skid steer,extra tires for trips...in all we love how you got the windows done for winter warmth.everythings looks great even mats cut perfectly...NICE !
Looks good. Great organizing. 🙌🏼 A couple of concerns . At the 7:51 time, the hook/handle to open the middle partition is right beside the tie latch ; concerned horses might catch their halters on it if they try to rub up against it to give themselves a scratch. 2nd concern; couldn’t tell if you had a low tote or tray under the oil/gas containers, easier to pick it up to clean it if you have a tray/tote. Not sure if I would carry the gas containers in the trailer because of the fumes, might agitate them. I don’t remember in any of the other videos I have seen you put the gas containers in the trailer. Nice for the horses to see out🙌🏼 Enjoy your new trailer, the convenience and comfort it is going to bring you folks and the horses. 🤠🐴🇨🇦
I would definitely cover the grain. As a full time RVer I can attest to how invasive mice are when they want to nest or find food.
Are the bags themselves rodent-proof? Don't know what they're made of.
Mice are like superman, batman, spiderman, and any other man when it comes to getting into things!
Mice and rats get into everything, it is said that a mouse can get through any gap as small as the diameter of a pencil !
If you are concerned by the strength of the screws in the aluminium, you can mix up some epoxy glue and apply that to the threads of the screws and then screw the screws in and they should remain nice and tight. I think you did a great job with the trailer and the baling twine is sufficient for the job.
should think about putting in some roof vents for fresh air for the horses ?
I like how you have it setup for Hauling the Horses. And how you have all your equipment set up on the board wall. And all the water and Feed Also Very Nice Setup You have There Plus see through Windows 👍 As the Smile on your face dictates you Like it Too Awesome Job Jim . Glad the test Drive Went Well. It doesn't sound That awful Loud Too Me Either. ✌️
Is it just me, I think Jim is very pleased with his new trailer. Jim you did a great job with the trailer. And Brenda as always another great video. Thank You both.
I agree to cover the feed. I wonder it you may want to pad the wood divider to help with the neck of the middle horse, like Bill.
You were talking about your 'd' rings inside the trailer for tying g your horses to . Here is what I would do if it was my trailer. I would take a small piece of mild steel flat stock drill a hole through it so a bolt would fit , drill through an upright stay where you want to tie off. Then using a large washer on the outside , that way there is enough structure so if something should happen the metal should not fatigue as easy.
LOVE your show I learn LOTS
My 4-H years showing cattle, we found packing the show animals together, side-to-side, fairly tightly, made for a more stable ride. Even in a large truck, a loose load that shifted on the turns resulted in a dangerous ride. I agree with the metal garbage can. I keep my dog food in one, in my garage, and never a problem. The excitement in your voice, Jim, was like a youngster with a new toy. 😁😁
Nice job on the trailer. I finally have a suggestion.
When I was very young, maybe five or six, my dad taught me how to braid baler twine. ( 3 strands). I spent a lot of time in the barn, making “baler twine rope”. As you said, baler twine is very strong and when it’s braided, it looks really nice. We used it for everything. Once in a while, we even twisted two together and put a little tape on each end. They look really nice.
I know what you’re thinking Jim, “ as if I had time to spend braiding baler twine “. 😊😊😊
I did the same thing, @Henry DeYoung. Sometimes they were very long when finished. In the last 8 inches or so braid the next pieces in with your current three and keep going. Very strong. Once I braided three long braided ropes together. Made a strong tow rope. 😁 Baler twine and duct tape, fix lots of things.
Being able to hang his head over that top board gives the horse a firm point to aid in keeping his balance while on the road so I see it as beneficial.
Aluminum screw threads are always a background concern since they're so weak, and you could use toggle bolts instead as a more secure fastener for the pad eyes, but I agree that the baling twine will break before the screws come out unless they get loose and wallow out over time (that's probably the time to install toggle bolts).
Of course mice would get into an open bin to eat the grain and also soil the bin. They're relentless.
Good point about Bill being able to put his head over the board to help with balance. It seems like a tight fit if he has to turn his head.
Jim, I think your horses like your new trailer as much as you do..🐴
1 horse in the back and 2 in front of your wheels will give you better weight distribution. That's the only thing I would do different. Looks great and may God continue to bless you.
My thoughts too. However that's the where the gate is mounted.
Trailer is made for cattle to be loaded loose, not tied
Maybe add a push broom.
Yes put a cover over the grain container. Mice will get into it. I'm not sure but you might want to be able to take some of the plexiglass off or open some how to allow air to vent out in warmer weather. Otherwise your trailer looks great 👍 Looks very comfortable for the horses. Great rig.
Might get condensation too . just a little ventilation is good especially with bigger horses
I think mice will get in but ince you find that lid it will be easier having your grain loose in the tote. Brenda, he does love his set up doesn't he :D very tidy and well organized. I love spending my morning coffee with you guys have a good day!
PS: I like the thinner rope in the trailer...they likely already know how to behave in the trailer and don't need the strongest tie and I agree, in an emergency you'll more quickly get them out
You put felts where the plexie glass is. Or cut straps from those pool noodles work great. Water proof of course.
Beautiful new rig! We have a camper, yes mice will get in trailers. Don't ask me how I know this. 🥴
Hello from Australia. I love your show. I have 2 Clydesdales. One is harness trained. An old mare called Jess. She's 22 and tough. Lady is like her, reliable and steady. I use an a small forward facing float. I only carry one horse at a time. She fell over on the slippery floor. Her head was jammed on the front bar and I was able to loosen the rope to quickly release her. Fortunately I had greased all the pins holding the chest bars and partition so I was able to remove them easily. Unfortunately she couldn't stand in the small space. She was facing the side door that is less than a metre wide. Her feet were half over the door way so I decided to see if she could get though. She managed because her hips are narrow. Her belly is fat but her ribs are flexible so she managed to bounce her way side to side. No injuries. After this I glued carpet to the floor which works well. The whole incident made me realise you have to imagine this happening to your horse and come with a plan. Including carry a good knife and tools.
You need a lid for the grain, the darn mice will find. The twine is just fine and I think your smaller tie rings in the back will last along time, all of your horses are tied a lot and none should sit back enough to damage them. I think the partition is good the way it is.
Looks great
You definitely need a cover over the oats. I would leave the oats on the bags that way it’s easier to fill them and put them in the tot. Very nicely done!
Great ! The mice will have a fun time in your grain ! You must have a tight container 😊
I think you did an awesome job with the trailer. So happy for you. The horses are lucky to have you.
Jim is like a kid in a candy store! 😂❤️
Fine job. Not excessively noisy. The horses seemed quite comfortable and relaxed.
I agree with the comment on mice. Use a galvanized container with a tight top. I'd keep the feed in the bags and put the bags in the metal garbage can. Raccoons and squirrels will chew throughput plastic and rubber and get in. I suppose mice could also. However, metal cans can collect moisture and develop mold in the bottom of the can. As long as you keep them clean I suppose it doesn't matter, however, I have always had trouble with plastic or rubber containers.
Maybe Michigan squirrels and raccoons are more hungry than out east? LOL
Wow!!! You’ve done a great job on remodeling your horse trailer!!!!!! You are loving it, and the horses ride so easy, have a good evening with your family
For your horse tires on the inside the Braided Hay twine, will do an adequate job because your horses are so well mannered. I have Belgians also and I use the five eights cross ties and we break him all the time because sometimes my horses are bad, but your hay twine on your clip will probably work better than anything on the market
A metal garage can sounds fine, but make sure that you use everything out of it, before you add more, since that definitely attracts the mice. On your inside brackets, I wouldn't be concerned about the mounting, but the small triangular pieces. I would make that they were welded and just pressed together. The jerking or movement of the horses while riding in the trailer could open that little triangular piece. Jim, my wife usually comments on here, but I thought I would after watching this video. You have done a great job, and you obviously care deeply about your horses. They will love their new chariot. Take care, you all are great!
I had fun getting to ride in back with the boys!!!❤ I think they enjoyed getting to look out at the scenery! You can have a camera put inside your truck that monitors inside the trailer. Kinda like the backup cameras on new vehicles and some people get them installed even on older vehicles. But you can have cameras inside the trailer too so you can monitor the horses. Love how you arranged your tools in the front of trailer! Be sure to put a first aid kit in there...hopefully won't ever need it, but nice if you did. Extra gloves and safety goggles maybe. When I had my Dobermans, I stored their 50-lb bag of dog food in a round container especially made for pet food I'd ordered online, but somewhere like Tractor Supply probably has large breed food containers with snap-on lids (may be in their large dog supplies).
Good idea, also maybe a fire extinguisher. Does not sound important unless you have ever needed one handy, which I have..., in my life, more than once. 1st aid kit, great idea. Otherwise, looks good.
Love the new trailer, regarding the mats, I had trouble keeping them in place, so I put a few screws in the rear mat. Really nice set up. I think I would build a feed box, with a lid that can be locked, I know you are very Proud of your new rig. And I really like the windows. Thanks for Sharing. 🐴🐴🐴
Just for your consideration ... On my Race Cars and UTV's, I place a thin layer of neoprene about 3/4" to 1" wide between the polycarbonate (good choice) and the metal. Left against each other, the polycarbonate (expensive) will chafe and sometimes crack, especially with cold weather. Unfortunately using the product (3M in roles is awesome) requires you to place it on the entire periphery of each panel. If you elect this, you won't be disappointed.
If they crack, you have acrylic, not polycarbonate. Polycarbonate will not crack. Even hitting it with an axe on the side you cant break it easily....I tried
@@Nordic_Mechanic I'd heard that too so I produced my own polycarbonate windshield for my Yamaha Rhino. It cracked from the mounting holes. Adhesive foam resolved the problem. I have a poly carbonate windshield on my AC Cobra made by a manufacturer that warrants against cracks. So far, so good.
@@richardgreen7811 I know a polycarbonate windshield manufacturer and get off cuts pieces. Never had one break even folding them in half and into a press break to make brackets and such.
I like to warn people that a lot of inferior material is sold as polycarbonate and it`s a safety hazard.
I appreciate your comments
Well though out looking like every thing is going to work for you and your use
Nice video Jim and Brenda, Jim I would cover the grain , I would use a metal grain bucket or trash can for sure, love the trailer and the way you set it up . Oh nice mats for the flr. I am sure the horses will love 💘 there new trailer. Jim just my thought, but I was thinking about a little air flow in the trailer.
It looks fabulous Jim buddy,you certainly know how to operate your beautiful horses,the horses love it xxxxx
Foam pipe insulation will tuck into the gap the narrow wall boards have left in the slot to keep them from moving or rattling around - and easy to remove when you want to take them out.
It all looks well done. The feed tub, you might make a utility storage wood box, hinged lid, sit in the corner, then place 1 or 2 metal trash cans on top ofutility box. . Hooked to wall and corner. Bungee the metal lid. It’d elevate the feed barrel’s a little, less bending down . And a bit of Mouse proof storage. Great window viewing for horses.
🙋♂️🐈🐈
The feed bags - keep in tote. Use a strong clip(s) to keep them closed. Mice will go wherever they fit - so it wont be mouse proof, unless in metal bin with lid. About the tie-ups. A well trained/calm horse would do just dandy. Those look like (for those big Draft Puppies) They will break or tear off during an extreme situation. Maybe good....maybe not. Horse First Aid supplies (people too) Maybe an EDC bag stashed someplace. And perhaps pad, or round off the edges of the top of the Partition where Bill goes in the trailer - Its throat height. Those straight edges look sorta sharp. Me, Id put Shipping Helmets on - But Not everyone does. Beautiful trailer. 👍
Jim at the 21:43 min mark in video the horse you put up front can stick his head above the top board of your wall. Maybe you should take top board out incase you hit a bump in the road and the horse hits his bottom jaw on it and could get hurt pretty bad. Or put one more board high so he or she can not stick there head over it. Good job fixing up trailer by the way. notice the gate the trail company put in they can not stick there head above it. After seeing him trying to move you may need to take a board off or he will be to big to move around in the little space you have him in
I like the setup. Opens door 3 nice Husky saws. 😍. Maybe a hook for your work gear to hang up unless you leave it in the truck with your lunch and first aid kit. Great video again 💪
I would suggest insulating the roof of the trailer. In the summer it really helps with the heat and moisture. I agree with the binder twine. The insulation might also cut down on the noise. Great job on the arrangements in the front. I like it very much 👍👌
Have you ever tested the trailer for carbon monoxide from the truck exhaust? Now that you have the windows covered, there may not be enough fresh air for the horses. It is just a consideration. I remember when I was in high school many moons ago, when I rode in the back of the school bus, I would get headaches from the CO in the exhaust seeping into the bus. You might be able to get a battery operated CO monitor for the trailer. Keep in mind that CO is lighter than air and will collect in the upper part of the trailer where the horses breathe. Since CO is odorless, it may not be noticeable. I wonder if other have had any experience with this.
Good idea on carbon monoxide monitor.
This is serious business and very dangerious because not understood.
I know many, or at least a few People that have died from unforseen circumstances related to this, always good to consider these things. Life of death!
Very good. .
Yep, the horse head up high! Well said my friend.
Horses enjoyed looking out thru plexi glass ...maybe Bills halter lead a little longer so he can stretch out...seemed a little tight...other wise happy horses ...nice work..👍
I use a big plastic drum with a water tight spring locking lid for my feed
Beautiful Majestic Horses
I knew a guy back in the day who used to braid the twine in to all kinds of stuff. I have used it to lead a hard to catch one or tie I off into reins on the halter and go bareback. I have used it to make temp repairs on a whole lot of things
Use the grain bags in your tote Jim. That way you will never be dumping fresh grain onto the remains of old grain in your tote. With my alpaca grain, I open a new bag and tip the remains of the old bag on top so it gets used first.
Really enjoy your horse and equipment explanations.
Hell of a job Jim! Looks great and it appears teh horses enjoyed the ride. The manufacturers should be putting in the plexiglass
Again, your care and concern for the horses always touches my heart. I enjoy the looks on their faces, like oh yeah, that's right we are special. Amen
Very nicely done & efficient on saw and tool storage. I agree with the others on covered grain storage. A metal trash can will hold your bag of grain or smaller container with a lid to pour a few days worth of grain into. Use your twine to tie them. Breakaway ties in a trailer is a good idea.
My thoughts on the trailering. In general, I think it’s such a nice improvement over what you had before. It looks so great. I just have a few comments and suggestions.
About the wood partition up in the front where you have Bill. I’ll think you need that extra room for the horse to be able to put their head over. Don’t extend it to the ceiling. Otherwise that horse up there is going to be so cramped that they won’t even be able to stand straight with their head out in a normal position. That will make them pretty sore.
You are absolutely correct in thinking about what you tie them with being able to be cut quickly or simply break if they get in a bind. The last thing you want is to have a thrashing horse down or if you get in a trailering accident and flip the trailer. And then have a horse that you can’t get close enough to without getting hurt yourself. You want them to be able to break whatever they’re tied with if there’s a wreck of some sort.
I still think it’s a little risky trailering with two big horses in the back and no horse up front where Bill was today. Once you get up to any kind of speed, I think it’s going to be really easy for that trailer to get fishtailing and cause some trouble.
I think you’re going to have to put some snug fitting cover on that grain bin or you’re going to attract rodents.
Great set up. I’m so happy that you have a trailer that will make your life easier.
Watched this with my sister. We both liked what you have done. But she noticed the roughness of the top edge of your top board. She suggested you sand it a bit to prevent splinters for you and the horse.
the only thought I had was also about the splinters
Looks like a real nice setup for what you're doing!👍
The only suggestion I have for you is to pull the floor mats at least once a year to clean the aluminum floor. I have a Feather Light and wish someone had given me that warning ⚠️
What happened to the floor without cleaning?
@@ChameshiCorrosion; the rubber mats do a real nice job protecting the floor but the seams let wet material through and hold it against the aluminum.
On the side where you are keeping the extra cant hooks and wedges, you could put a hook on the wall for Brendas' hard hat.
The sawdust on the floor will make it sooooo much easier to keep the floor clean after the apples fall.
Big horses have big butts, it is a fact of life, not to worry.
My only other though was that the side access door should have been on the passenger (right) side of the trailer.
That's a fantastic trailer! I like the idea with the boards, so if needed you can snap in another one. Before you started driving around I was thinking that your chainsaws will swing around and that the windows will be quite loud, but it turned both out to be quite calm. If it is still too loud maybe you can use sponge rubber strips between the glass and the aluminum. With screws in aluminum I have always made bad experience, I would make a bolt through the whole wall. Is there a light in the trailer? If not that is something I would suggest to install. For the grain, a good idea might be some kind of metal box that can be closed, to avoid the mice and rats go into the trailer. The explanation with the yarn and that you can cut it in an emergency is really plausible. I think I'll take over that for myself! -Chris
The low wall looks great and it seams like Bill gets a little more room when he puts the head over it 😍 Hooks on the grainbuckets makes it easy to hang then. Great job!
I agree. It's good that Bill has that little extra room to "stretch out". Good comment.
Look forward to each video. Each video is quiet unique. Love what you did to the horse trailer. Now a pooper scooper, bucket. Save the fertilizer. Maybe add some removal windows to plexiglass so in the warmer or hot days they have the wind on their faces. Maybe set up a camera all the time you could check on them for long trips. Live stream Horses like the truckers in their convoy to DC, on long trips. Hours long they got a lot of super chats, people loved it. Do they need snow shoes? Good practice run. The whole time I was wonderful where will you put their harnesses, Bridles, and blankets when you don't need them until you get some where. Maybe you won't need them for a couple hours? Like pulling contest. Thank You!
The boys seem to enjoy being able to look out the windows! The Gentle Giants!
Very well laid out. A metal garbage can works great for feed that’s what I use. May GOD bless. Larry
Looks like your top board needs sanding looks like slivers on it
We enjoy watching the horses work.They are beautiful.I think they like the new trailer.It's a real nice trailer.Maybe to quiet the noise with the plexiglass, you might put small amounts of silicone around the top and bottom of the plexiglass.we can't wait to see what you and the horses do next.
That was enjoyable thank you jim@brenda. 👍😊🙌🐴🐴🐴
Do you carry spare halter(s), lead lines, double ended snaps, hoof pick with you that can be kept just for the trailer? When I pleasure drove competitively we carried what was called a spares kit. A hole punch, either a spare rein or rein splice, leather laces - so if a rein, trace or other part of the harness broke, we could repair, wheel wrench, pliers, pocket knife. I think there were a couple of other items required for pair & 4-in-hand turnouts. I had all the tools secured in a small kit, with the halter, lead line & a light weight horse sheet as well. I kept a kit in each my carriages all the time, as I loved driving on the road & on trails in local parks & it gave me peace of mind knowing I was prepared for most any situation. You might consider a first aid kit, with you chain sawing in the woods, it would be a good idea. I like what you’ve done with the trailer. If you or a friend does any aluminum welding maybe consider welding large “D” rings to the inside post for securing the horses. There are trailer ties available that have a quick release snap that is great for an emergency, slight tug & horse is free, without cutting the line. Most are adjustable in length so the horse is safe & comfortable. I love watching your videos & how you train your horses! I’ve not been able to drive since ‘09, different medical issues keep happening, which have made even being in the barn a challenge. I’m down to my last Norwegian Fjord - a 23 yr old mare, she’s a sweetie , that I would love to drive again. But for now she’s a out to pasture. Thank you for all you share. God bless!
wow awesome list guy...nice for Jim
Thanks for sharing your tralior, Jim ,Brenda, it's looking good , a couple off things you need a tube with a lid on it for your grain , those rats and mice with love the open bags , the set up with all your tools and fuel , oil ect looking great , good idea easy to get too , iff you have trouble with those bolts screwed it the wall were you hook those horses too ,maybe try drilling them out and put nutserts and screw threaded bolt into them , they tralior ride was good the horse were looking around , good they can see out Jim , if you have trouble with the perspeces making to much noise put a dob off silicone between it and the metal, ok have a good day too you all cheers from Australia 🇦🇺
I had to chuckle at your video mishap and us viewing the backside of Ken…of course he has a big butt Jim because he’s a big horse. All kidding aside, I so enjoy watching all the different personalities of your horses but I do have to say I’m thinking Bill wants to do EVERYTHING in one speed…FAST! Seeing him bolt out of the trailer was quite a display of that need for speed. I hope he survives being mated with other horses during Lady’s “maternity leave” because I’ve heard and seen how he handles the separation from her when she was being pared with Baron. How do you feel all the horses will respond to a new colt on the farm when Lady foals? I’m anxious to see how Lady takes to mothering too. Exciting spring coming! And just a quick comment on your new horse trailer…I’m as happy for you as you are Jim!!!:):):)
That was fun! and I think the idea of leaving the top boards off the patrician is a good idea. Bill kept his head over it most of the time and it gives him a little more room head wise to gawk around and look out the window etc. So looks like everything is working out the way you have it planned. right now. The only thing that comes to mind is for summer hot temps is there any fresh air coming in to keep them a little cooler.? maybe design some kind of window to open where the plexiglass is? or in front where the over hand and tools are to get some air in there etc. that's my 2 cents worth great job Jim and Branda thanks for shairing ECF>
If you look back on some of Jim's videos from during the summer months when he had the old trailer and the horses out and about, you can see that he had the top boards out of the side windows of the trailer to get air flow for the horses. I bet he will do the same thing in this one as well. Seeing how he said that it was really easy to install the plexi-glass, should be easy to pull out for airflow in the hotter months.
he did say earlier that it be only for winter,,,but do you think he might need extended mirrors ( larger ones ? )
Nice setup, metal can for food and mice couldn't get to it.
Beautiful trailer! Watching the horses in it was interesting
Looks great . Well behaved horses . Very nice set up .
Make sure you have 2 spare tires at all times.
Good planning Jim. You are right about the mice. Wherever there is grain there will be mice. The more secure the grain the better. Thank you for sharing.🐴🐴🐴
I think the additions you made to your trailer are great. Nice use of available space for your supplies and the needs of your horses. Very impressive all the way!
You've got a nice set up Jim. I like it.
Just enjoy your videos with horses so much. So descriptive and the camera in the trailer..well I love the smell of fresh manure and horse. Lol. Keep up the good work.
yes you will want to cover your grain them there mice get into everything, where are you going to hang your harnesses when you go to a pull ?
Sounded great jim and brenda, sounded just like hail stones... And tge hirses seamed o k with the ride 🐴🐴🐴🙌
When I worked with beach donkeys, the owner used a cattle trailer, the donkeys did not like the partician gate in between them and would not even go near it,so it was never used, but we had one donkey if you told him to push the others up in the trailer he would do, so that we could get them all in.
Love the set up, the placement of items, the baling twine break away ties, and I must say, a metal can is more better than a plastic tote and you can dump your grain in it without any issues. Now with you being active in pulling contests, you might want to get some harness hooks that you can take off when not in use and put it back on when you do go to events. Other than that, great idea. Be sure to give a bit of gap in some of the windows since horses during cold weather would create condensation inside the trailer unless you do have vent slots.
That looks great 👍!
A big trailer for big horses.
They are beautiful and how calm they are, fantastic!
The trailer looks very efficient. Your horses are blessed to have such a caring owner.
I love the red boots & watching a man shop, even if it’s just a “boy store*.
I absolutely love the organization of the new horse trailer….fabulous 😊