no me parece tan buena la contruccion deverian poner doble madera otro tornillos de encarne metalicos porque los tornillos que ponen van directamente a la madera y con la vibracion de pueden soltar y provovar axidentes puede caer el parlante
The finishing quality is very poor. Some of the screws were crushed when I hit them. There's a scratch on the screw, and there's a wooden case, and there's a scratch on it. The finishing quality looks terrible.
Hola, me pareció muy interesante la elaboración del cajón. Quisiera mayores detalles del mismo, como las dimensiones, donde puedo adquirir los soportes de metal, las agarraderas y la base para colocar los conectores de entrada, ya que en país me es defisil Conseguir.
The "I" in ISO means international??!!?! Then what does it mean at my local IHOP???? Or any IHOP?? It cannot mean the same. I have traveled to 49 different countries in my lifetime. And the US of A, is the ONLY country on this planet with IHOP's. Therefore......
What makes a speaker a LINE ARRAY speaker? These can probably work fine as individual speakers but I wouldn't stack them as line array modules because from what I see, they can't really seamlessly connect above 5-6 kHz... too big gap between the horn waveguide and the side of a speaker.
Isso parece caixas do tipo Line Array mas não são. São caixas comuns colocadas uma em cima da outra e penduradas como line array. As caixas line array possuem direcionadores de som bastante sofisticados e elas direcionam o som como se fossem canhões de luz.
I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.
If you want to save money, a good alternative to Durex coating is first spray your primer coat then take some thin rubber strips and throw it in a blender. Mix the rubber grains in black paint then..ta da you have poor man's Durex. Playground sand works too but then you end up with sandpaper cabinets that scuff everything you come in contact with ,like vehicle doors ect.
I know Im asking randomly but does anyone know a method to get back into an Instagram account? I stupidly lost my password. I would appreciate any tips you can offer me!
@Brooks Salvador thanks so much for your reply. I found the site through google and I'm in the hacking process atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
Where Can I Get Those Rigging Brackets To Purchase ? Im Building Some Dual 15' For Myself. I'm Intrested In Getting A Couple Sets , Also Whats The Dimensions Of The Brackets so ill know if it will work . Thanks
Why don’t they invest in a programmable CNC machine for woodworking. They obviously sell a lot of those PA speakers so it would cut down production time by a lot. I worked for Quantum fine case works in Weston Florida. We built custom shelves and islands for businesses. We had programmable CNC machines that wouldn’t waste any wood and cut with razor sharp precision. These guys look like they are doing very well financially speaking so why not invest in a CNC machine
Tem como me passar as medidas dessas caixas de son pra mim por favor esse eo meu fece (elielson silva) manda la so maior fã de caixas de son curto muito ...
oh I've seen these guys before. They know absolutely nothing about speaker design. Hell, I know more than they do and what I know is a drop in the bucket.
Good sounding speaker but id say ud want to b in your health to lift them , Done that for years with yokes that were really a 2 man job, paying for it now with back trouble ,Good thing we can get very good sounding light weight speakers now ,Brilliant job though with minimal tools...
I built speakers professionally for years. I would not have accepted that as "Pro Audio" level of quality on the cabinets or the design. Ports are not tuned, no wave guide, two way only....scale of 5 I give them a 3.5
Ha ha ha, On a scale of 1/100? I'll give them a "-13". The HVAC guy called. He wants his filter covers back they stole off of his AC units! Those Line-arrays? Are that in name only. It's an "array", alright. An array of what? I don't think that we'll ever really know.......
на столько не окуратно все делают при сборке куча слидов сколов и так далее сплошная халтура у меня сын бы собрал на много лучше! Не срывая грани на винтах.... Положили звуко поглатетиля очень мало и даже в отверстия не вставили фазо излучаители ))) колроче ХАЛТУРА!
СТОЛЯРКА ПРОСТО НИЗШИЙ УРОВЕНЬ САМА КОНСТРУКЦИЯ КОЛОНКИ РАЗМЕРЫ ОТ ПОТОЛКА ДИЗАЙН МИНУС 5 НЕ СТОИТ ПОКАЗЫВАТЬ ВАМ КАК БЕЗ ФОРМАТНИКА НАРЕЗАЕТЕ ДЕТАЛИ.....
It's very fantastic what they do with the primitive tools. But the quality of the speakers is horrible. Cheap parts everywhere you look and the soundtest at the ende is a joke. Maybe the speaker are interesting for bands with low budget
How crap. Talk about some horrible shop practices. At one point even grinds his table saw blade into an aluminum guide fence. You can hear it hit and then a cut shot to where they changed out to a wooden guide. Honestly not sure how the project turned out so good. I was honestly waiting for an ambulance to be called
Awesome video. Just a couple of nitpicking things: 1. The shop looks like it's a mess. Trash everywhere, especially outside. And in the background you can see lots of half-finished/ disassembled speakers. What's up with that? and 2. It looks like the input plate was installed upside down. With any speaker, and especially line arrays, you want to the cables to be going UP into the box and not down. This is important for water run off etc.. for outdoor shows. 3. I didn't see any "loctite" in the video. Some of those bolts on the rigging hardware were hand-tightened, which wouldn't be a big deal if you used some type thread locker like "loctite" or some generic brand. Safety is #1. But overall, great video!
There was a BUNCH of sketchy stuff: watching the drill slip and mark the sides of the grill. The wiring putting pins 1+ & 2+ together?! Really? Not a great cabinet finish, needs a much better coat, that will scuff off quickly. Line array horn has to be the full height of the cab to couple with the cabs on either side otherwise comb filtering. And then there's no ventilation in the shop, tools from 1960, just basic homemade speakers.
Not how he sound checked them they aren't. Those are designed to lay flat and stack several in a vertical array, connected by the sturdy metal frames on the ends of the cabinet.
nice job on the cabinet. but audio wise, this is trash. line array speakers can't be set up like this since their beam is now 90 degrees off. the ports are just triangular cut holes but nothing more. not sure if you just bought those parts or actually saved it from an actual line array speaker but this is no line array speaker.
This is cool! I have some custom hand made speakers that was made 27 years ago and they still sound great better than anything you can buy from a store. Mine are 18" Woofers, Midrange Horn & Tweeters. The only thing I had to replace was the Midrange in 27 years. A friend of mine built them for me. I treated the wood with polyurethane with about five coats to bring the details of the wood out.
If the speakers perform just like "the high quality finish", I'm afraid I'll have to say " pass" to these. I can see it's a long, hard and detailed work but, judging by the way these guys are handling their " instruments", that is a "no-no".
I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.
Two men army. Working for their livelihood. Don't complain their hard work just because you have seen automated manufacturing in TH-cam channels. All the best.
Hervorragende Arbeit ? Keiner Verzahnung der Platten, keine Lamellos? Schlechte Holzqualität ist an den Schichten zu erkennen. Um Himmelswillen und dann sollen noch mehere Lautsprecher geflogen werden.
Every time a screw head slips an angel dies. carnage!
L
20:42 dislike (((((((((((((((((((
@Jerk Of All Trades 😛😛😛🤣🤣🤣🤣🤣🤣🤣🤣
Do cabinet ki price kya hogi please bataiye home delivery ho jayegi Uttrakhand m liner please
no me parece tan buena la contruccion deverian poner doble madera otro tornillos de encarne metalicos porque los tornillos que ponen van directamente a la madera y con la vibracion de pueden soltar y provovar axidentes puede caer el parlante
Good project Brazilian here like video
Hình như là quả bút bi thiên long thần thánh. Hàng việt nam sao ko có chữ việt vậy
Mấy ông hưng yên giỏi lắm
If they clean the protective grills before putting them on, they would look better.
th-cam.com/video/uRq1niFODGE/w-d-xo.html
if you give me a pair for free i can clean grills for you.
Or video bhejo bhaiya
Bahut achi lagi aapki video bhai and nice work
The finishing quality is very poor.
Some of the screws were crushed when I hit them.
There's a scratch on the screw, and there's a wooden case, and there's a scratch on it.
The finishing quality looks terrible.
arte mo
Its ment for hard use being moved around a lot. It will be full of scratches after the first few jobs.
Parabéns pelo excelente trabalho... ficou maravilhoso!!!!
Good video
Hola, me pareció muy interesante la elaboración del cajón.
Quisiera mayores detalles del mismo, como las dimensiones, donde puedo adquirir los soportes de metal, las agarraderas y la base para colocar los conectores de entrada, ya que en país me es defisil
Conseguir.
Mình muốn đóng mới một cặp loa bát 40 chắc thùng giá bán bao nhiêu tiền
3 triệu 1 cặp bạn nhé
Just enjoy the attention to safety in these businesses.
@João Maverick yes, occupational health Safetey does not seem to be a priority.
However, life appears to be cheap in many eastern countries.
The "I" in ISO means international??!!?! Then what does it mean at my local IHOP???? Or any IHOP?? It cannot mean the same. I have traveled to 49 different countries in my lifetime. And the US of A, is the ONLY country on this planet with IHOP's. Therefore......
A manufacturer showing how he scratches metal surfaces and stripping screws... Just wow..
Guys, cut them some slack Geez!!!! At least they are doing something instead of robbing or begging!!!!
What makes a speaker a LINE ARRAY speaker? These can probably work fine as individual speakers but I wouldn't stack them as line array modules because from what I see, they can't really seamlessly connect above 5-6 kHz... too big gap between the horn waveguide and the side of a speaker.
Динамики норм, а корпуса не очем.
Морда колонки в стиле кондиционера "электроника БК 1500"
Акустическое оформление - "Ящик с дЫрками"" ?? Для пляжа наверно ....
Isso parece caixas do tipo Line Array mas não são. São caixas comuns colocadas uma em cima da outra e penduradas como line array. As caixas line array possuem direcionadores de som bastante sofisticados e elas direcionam o som como se fossem canhões de luz.
I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.
Yes, he does have a gig, it's underneath the board he's cutting, the router has an arm that follows the shape
Hola, alguien sabe que relación hay en ahorro con respecto a una caja de fábrica? Vale la pena hacerlas DIY? Saludos 👋🏼
nice speaker,but nextime use a proper sound system to test your speaker, good job bro,,,,
I am very curious
About the quality of
The sound. Please
Let me know
An excellent presentation Mr.E... WELL DONE!!! Nice to see how precise those guys are with the making of those speaker cabinets... 10/10
Wow, what a service pork. In addition to being dirty, you buy the scratched product.
We will learn to work more carefully
If you want to save money, a good alternative to Durex coating is first spray your primer coat then take some thin rubber strips and throw it in a blender. Mix the rubber grains in black paint then..ta da you have poor man's Durex. Playground sand works too but then you end up with sandpaper cabinets that scuff everything you come in contact with ,like vehicle doors ect.
o.
I know Im asking randomly but does anyone know a method to get back into an Instagram account?
I stupidly lost my password. I would appreciate any tips you can offer me!
@Marco Ty Instablaster ;)
@Brooks Salvador thanks so much for your reply. I found the site through google and I'm in the hacking process atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Brooks Salvador It worked and I actually got access to my account again. Im so happy:D
Thank you so much you saved my ass :D
Where Can I Get Those Rigging Brackets To Purchase ? Im Building Some Dual 15' For Myself. I'm Intrested In Getting A Couple Sets , Also Whats The Dimensions Of The Brackets so ill know if it will work . Thanks
Teve uma vacilada, Colocar o dividor de frequencia na lã de vidro! o Resto ficou muito bom
Why don’t they invest in a programmable CNC machine for woodworking. They obviously sell a lot of those PA speakers so it would cut down production time by a lot. I worked for Quantum fine case works in Weston Florida. We built custom shelves and islands for businesses. We had programmable CNC machines that wouldn’t waste any wood and cut with razor sharp precision. These guys look like they are doing very well financially speaking so why not invest in a CNC machine
Tem como me passar as medidas dessas caixas de son pra mim por favor esse eo meu fece (elielson silva) manda la so maior fã de caixas de son curto muito ...
thankyou for knowledge : subscribe ok.
Price ??
Satym sound malsar.
ใบเท่าไรครับชอบๆๆๆๆ
Good Morning ! in Brazil. I could have the project with the measurements of this speaker, thanks
oh I've seen these guys before. They know absolutely nothing about speaker design. Hell, I know more than they do and what I know is a drop in the bucket.
Can you teach me how
Cặp này hoàn thiện, full loa giá sao vậy ạ?
3 triệu
@@MrElectricity1111 sao rẻ vậy thôi ạ? Bác ở đâu thế?
20:40 .... Oh scratch... Daaaaaammmmmmmnnnnn
Good sounding speaker but id say ud want to b in your health to lift them , Done that for years with yokes that were really a 2 man job, paying for it now with back trouble ,Good thing we can get very good sounding light weight speakers now ,Brilliant job though with minimal tools...
I built speakers professionally for years. I would not have accepted that as "Pro Audio" level of quality on the cabinets or the design. Ports are not tuned, no wave guide, two way only....scale of 5 I give them a 3.5
did you catch the boat prop in the background? I wouldn't consider these guys pro either ;)
Ha ha ha, On a scale of 1/100? I'll give them a "-13". The HVAC guy called. He wants his filter covers back they stole off of his AC units! Those Line-arrays? Are that in name only. It's an "array", alright. An array of what? I don't think that we'll ever really know.......
It's just a Vietnamese workshop, they just copy the design of China speaker, then their products not the best one.
@@scottxfactoraudio8799 is Just a Vietnam workshop, they don't enough tools and knowledge to make a professional one!
на столько не окуратно все делают при сборке куча слидов сколов и так далее сплошная халтура у меня сын бы собрал на много лучше! Не срывая грани на винтах.... Положили звуко поглатетиля очень мало и даже в отверстия не вставили фазо излучаители ))) колроче ХАЛТУРА!
Is Good👍
my "takeaway" from this video.... Chinese labor costs LESS than a CNC router
Sir please I'm from Cameroon a high school student please I wish could teach me sir
СТОЛЯРКА ПРОСТО НИЗШИЙ УРОВЕНЬ САМА КОНСТРУКЦИЯ КОЛОНКИ РАЗМЕРЫ ОТ ПОТОЛКА
ДИЗАЙН МИНУС 5
НЕ СТОИТ ПОКАЗЫВАТЬ ВАМ КАК БЕЗ ФОРМАТНИКА НАРЕЗАЕТЕ ДЕТАЛИ.....
Hello I'm form Indonesia 🇮🇩
Hi
@@MrElectricity1111 hi too
@@MrElectricity1111 Respect From 🇲🇨. Sound System Malang East Java
@@Simegaudio Daerah Mana
aku solo cak... ki sing gawe po yo wong indo? kok suorone koyo wong jowo
It's very fantastic what they do with the primitive tools. But the quality of the speakers is horrible. Cheap parts everywhere you look and the soundtest at the ende is a joke. Maybe the speaker are interesting for bands with low budget
Absolutely amazingly breathtakingly stunningly beautiful 👍👍
Pls.give the it the numbers of phone.....
How crap. Talk about some horrible shop practices. At one point even grinds his table saw blade into an aluminum guide fence. You can hear it hit and then a cut shot to where they changed out to a wooden guide. Honestly not sure how the project turned out so good. I was honestly waiting for an ambulance to be called
Awesome video. Just a couple of nitpicking things: 1. The shop looks like it's a mess. Trash everywhere, especially outside. And in the background you can see lots of half-finished/ disassembled speakers. What's up with that? and 2. It looks like the input plate was installed upside down. With any speaker, and especially line arrays, you want to the cables to be going UP into the box and not down. This is important for water run off etc.. for outdoor shows. 3. I didn't see any "loctite" in the video. Some of those bolts on the rigging hardware were hand-tightened, which wouldn't be a big deal if you used some type thread locker like "loctite" or some generic brand. Safety is #1. But overall, great video!
There was a BUNCH of sketchy stuff: watching the drill slip and mark the sides of the grill. The wiring putting pins 1+ & 2+ together?! Really? Not a great cabinet finish, needs a much better coat, that will scuff off quickly. Line array horn has to be the full height of the cab to couple with the cabs on either side otherwise comb filtering. And then there's no ventilation in the shop, tools from 1960, just basic homemade speakers.
Realmente este sistema con varias piezas se reproduce todas las frecuencias acoplandoce bien las del grabe de 15" con las hight del difusor ?
Is the orientation of that horn correct? Mounted in an array the sound will be mostly spread up and down instead of left and right.
Not how he sound checked them they aren't. Those are designed to lay flat and stack several in a vertical array, connected by the sturdy metal frames on the ends of the cabinet.
th-cam.com/video/uRq1niFODGE/w-d-xo.html
Деду больше не давайте работу. Сорвал саморезы, где только мог. Поцарапал защиту.
Custom made sh!t speakers.......
i mean the cab looks good enough
nice job on the cabinet. but audio wise, this is trash. line array speakers can't be set up like this since their beam is now 90 degrees off. the ports are just triangular cut holes but nothing more. not sure if you just bought those parts or actually saved it from an actual line array speaker but this is no line array speaker.
Товарного вида нет,как будто им 20 лет
Ахаха втащил шуруповертом по боковухе, оставил борозду и даже не вздрогнул. Норм так сойдет, manufacture в гараже ахаха.
IMHO - a hell of a lot of work to make a really nice cabinet only to ruin it by spraying on texture. Why?
This is cool! I have some custom hand made speakers that was made 27 years ago and they still sound great better than anything you can buy from a store. Mine are 18" Woofers, Midrange Horn & Tweeters.
The only thing I had to replace was the Midrange in 27 years. A friend of mine built them for me. I treated the wood with polyurethane with about five coats to bring the details of the wood out.
Porno lésbico de monjas
@@carlosrobertosantandergime5905 Que quieres decir con eso mi padre?
Ki understand the morning to you and the other hand the end up being more about this and I will have to
Hj
😊
sir monitor ka kya ret he 300w ka 9724455030 Gujrat se
Parabéns .... Muito bem feita .
БОЛЕЕ ПАРШИВОЙ СБОРКИ Я НЕ ВИДЕЛ ЕЩЁ КРУЧЕ ПОКРАСКА...
Line array with passive filters?
Very inefficient, unprofessional.
колхозная работа. вес в царапинах ))))
Olá parabéns
Tenho 24 line quadra faço rodeio.
Gostei deste projeto tem passar as medidas deste projeto
Dam that polyfill going to catch on fire
please tell me where you ordered your hanging brackets from. de donde tu compra las bracketas
What do they paint from the spray gun? What kind of coverage?
Orange peel texture paint.
Duratex
What can a gun u used regular paint car gun?? Causs i have cuple buy i ready tey qnd the texture not coming out never its to heave i used duratext
Sar ji pura DJ system banana hai 4 15 inch 4 12 inch kitne ka Padega Amplifier machine ke sath main Lucknow se hun 7668476813
If the speakers perform just like "the high quality finish", I'm afraid I'll have to say " pass" to these. I can see it's a long, hard and detailed work but, judging by the way these guys are handling their " instruments", that is a "no-no".
These are how most top end line array and speaker boxes are made. U just don't see how they're made. It is quite a bit less professional than this
I'd say that though it all looks a bit rough and ready, judge them by how precise they are with their tools, not how precise it LOOKS like they are. These guys have done this, many many many times and it shows. I am a cabinet and kitchen builder and I was thinking about making some ply cabinets for a hobby, and I was shocked at first, then amazed by the precision these guys have with simple tools, practice and dexterity. At 6:57 I rewound it many times to see if he had a jig to make it that precise, but no, he does that freehand. Mental.
Lỗ thông hơi sao ko gắng thêm miếng gỗ cho nó.....
Qualidade de áudio excelente, serviço maravilhoso
tell me you don't understand the use or purpose of glue without telling me you don't understand the use or purpose of glue
So what kind of metal parts are these connectors
They're fucking metal parts. What other kind of metal parts are there? Horse hair metal parts? Saltwater metal parts?
@@TempoDrift1480 salvage reply
Người Việt Nam làm ma toàn người nước ngoài bình luận
PERFECTO!!! UN TRABAJO DE PRIMER NIVEL! GRACIAS POR EL VÍDEO! SALUDOS DESDE ARGENTINA
que tiene de pro una guia de cobertura horizontal puesta verticalmente?
the lesson to be learned here is don't bite your fingernails....
So ,Nice ,Projec
can i have a copy of the speaker box plan?
Bao nhiu 1 cặp
Muito bom amigo .quanto custou cada caixa?
90$
Mr.Electricity donde se ubicacan. ?
@@MrElectricity1111 tiền vn là bao nhiêu shop
Me gustaría k fuese separado el medio del harto en el conector a 2 vías separados de diferente potencias
Two men army. Working for their livelihood. Don't complain their hard work just because you have seen automated manufacturing in TH-cam channels. All the best.
I like how they don't give a f** about propper grounding 22:59
Ciri khas indonesia,,kerja tanpa sarung tangan.
Hi I would like to buy some of these how much are they can I get contact info?
Assalamuwalekum selamat pagi Pak,
saya mau tanya line array nya per box kisaran brp hargx Pk.
You just can’t beat China quality and labor costs 😆
What model of the speaker or Line array hardware Sir? and where to buy?
What is the name of the textured paint that you put on the black end? please and thanks
Hola amigo me podras pasar las medidas de las lineales me gustaron tengo unas bocinas de 15" jbl
It looks like heavy voids in the plywood. Never good for speakers
A cho e xin kích thùng loa 30 này nha a, để e đóng thùng loa này nha a. Cảm ơn a
that is not a line array , its a normal full range passive cabinet with linearray horn
Ismain plait ka kyu lagyi aapne bataye
good
can buy brecket pro audio bos.1 array how much it costs??
Tremendo trabajo para escuchar basura de música, una pena.
Hervorragende Arbeit ? Keiner Verzahnung der Platten, keine Lamellos? Schlechte Holzqualität ist an den Schichten zu erkennen. Um Himmelswillen und dann sollen noch mehere Lautsprecher geflogen werden.
கதிரவன்