nice work on that amplifier, to wire that is admirable! small tip, patience is the difference between a completely smooth surface where to wood meets and not.
This is the second subwoofer featured in this channel with the same issue, the rattling is just absurd. You invest so many time and resources doing this, but you don't give the extra care needed to make an outstanding final result, and yes your job is amazing and your electronic skills as well, but for me is just unbelievable to think that after all this effort you cut on making an acoustic reasonable box
What's wrong with you guys? It's OBVIOUSLY his tin roof rattling. That's very common in his area of the world. I swear, it would probably kill you to just say "Hey man, good job." I would bet $1,000 that neither of you have HALF the skills of this guy. Unbelievable.
@@robertjefferson8275 💯 agree with you. That's definitely not the box or the sub. I'm certain it's the roof or other metal things rattling. It reminds me of exactly how my license plate sounded back when I had a system in my car.
ну ты ничего не понимаешь, они лучше инженеров kef знают какой объем короба и толщина нужны, так же они прекрасно выставили на глаз фазоинверторы! Но по факту этим рестораторам бы руки переломать, восстановители хреновы.
Can you post the name of the stuff you're using for your restoration, like this chemical that removes adhesive and the glue for the cones? And where you get the perfect replacement parts when needed? Thanks!
If you're going to go to all the trouble of fixing it, why didn't you re-paint the speaker base and make it look half decent. Just seems like a lazy restoration to me.
Фазоинверторы 50мм ? Один свист трубы будет. Нужно 110мм минимум при таком подвесе. Ну а в конце при прослушке вообще не понятно что у вас дребезжит помещение или сабвуфер разваливается уже . 2300вт если только pmpo В коментариях одни глупые и восторженные комментарии. Все плохо сделано . Видно что человек вообще далек от этого.
Do u guys do repairs for ppl outta state if so I'd like to send an Amp to you that needs repairs done to work again please let me kno thanks I like the work u do I follow u as well
Is it worth it?! Sourcing the right components, etc. If you had a workshop, and equipment, then yes ! These people do it as semi-professionals. You have to have the right contacts, and materials to cannibalize. Ne vale la pena?! Reperire i componenti giusti ecc. Se avessi un laboratorio, e attrezzature, allora si ! Queste persone lo fanno come semi professionisti. Devi avere i contatti giusti, e e materiali da cannibalizare.
Единственное что нужно было сделать переклеить подвес и все,ну и продуть дин от пыли,а автор развез это на сутки🤣🤣🤣да и катуха уже была ремонтная судя по надписям изнутри,с завода никаких надписей нет
Сборка ужасная. Не проклеил стенки короба. Не проклеил посадочное место под динамик и под плату. Гермитизации никакой. Шумовиброизоляции никакой. А потом хотите хороший звук?
2300w through wire of less than 0.5mm. yea right. 0.51 wire at 4 ohms would be around 50m of wire and could carry about 0.577A . 2000w/0.577 A = 3.466 Kv HaHaHa I recon 400w rms max
Я того мир ебал. Нужно то было катушку заменить с подвесом, а короб хотя бы в JBL рассчитать. Параметры тс стопудово никто не снимал. Они наверное и не знают что это такое. Насчёт пайки я вообще в ахуе - кондёры первыми паять, это же пиздец. Сначала впаивают самые низкие детали, а потом по возрастающей. Про паяльник я вообще молчу, хорошо хоть топор на костре не нагревали чтобы платы сваять. Да-а-а а-а-а-а-а 😖
nice work on that amplifier, to wire that is admirable! small tip, patience is the difference between a completely smooth surface where to wood meets and not.
Какие 2300 ватт...вы фантазёр.....а так работа хорошая...
Лучший, спасибо за потраченное время!!! Здоровья тебе и твоей семье!!!
Definitely a flea market woofer
pretty much, they were always sold online in places like ebay under the pyle, auna, in-phase brads and were really cheap. I think around £35.
@@axeami1354 looks like some of the eclipse subs to me
you are the master of electronic stuff
This is the second subwoofer featured in this channel with the same issue, the rattling is just absurd. You invest so many time and resources doing this, but you don't give the extra care needed to make an outstanding final result, and yes your job is amazing and your electronic skills as well, but for me is just unbelievable to think that after all this effort you cut on making an acoustic reasonable box
the sound oozes from under the speaker and from other crevices, the bass reflex ports are very small and not tuned
What's wrong with you guys? It's OBVIOUSLY his tin roof rattling. That's very common in his area of the world.
I swear, it would probably kill you to just say "Hey man, good job." I would bet $1,000 that neither of you have HALF the skills of this guy. Unbelievable.
@@robertjefferson8275 💯 agree with you. That's definitely not the box or the sub. I'm certain it's the roof or other metal things rattling. It reminds me of exactly how my license plate sounded back when I had a system in my car.
AMAZING....SHOW
Very very good and fantastic ok 👍 👍 😊
That speaker aint 2300 watts
That's probably like 10k+ PMPO of course, probably like 500+ watts RMS or something
Has 2 coils so if each of is 500w rms then its a 1000w rms subwoofer
Good job 👍🏽👍🏽
Yip no way it's 2300 watts.
@@markgraves2209он неимеет 2300 ват
21:00 garage shacking :D love it GJ
Great Work 👍👏
Muy buen trabajo 👍👍👍
Мой пердёж похож на звук этого сабвуфера
ну ты ничего не понимаешь, они лучше инженеров kef знают какой объем короба и толщина нужны, так же они прекрасно выставили на глаз фазоинверторы! Но по факту этим рестораторам бы руки переломать, восстановители хреновы.
@@MadMaxTMgames_channel Если такой саб поставить дома, соседи будут в восторге
@@МистерТрололо-ж9й сам в первую очередь встанешь что бы выкинуть это произведение рукожопого мастера. Звук блевотный получили на выходе
@@Woon_Shen_Hang Именно, но он делает деньги на просмотрах
Ну фазик там значительно нужен большего объема и тогда звук будет мощьный
First,,,,very informative video...thank you for sharing
Hey brother...great job. Turned out great...and you did it all with your own two hands. Will be watching more of your videos. ❤
The speaker is unique.
Congratulations, it was very good.
🎉BOA noite ótimo essa caixa de som show de bola😊
Um ótimo trabalho PARABÉNS👏👏👏👏👏
Um ótimo traballho PARABÉNS 👏👏👏👏👏
ok quá đẹp 10/10
What product do you use to take the adhesive off to take it apart????
ацетон же
@@evilenin9712 а растворитель пойдёт?
@@ДимаМалый_777 для резины точно
Great video!
Restoration ✅
Destroying location near subwoofer ✅
5:29 danger... scorpion in the table (or lagart)
U best !!!u r big fan from Russia!!!
Nice it looks good.
Really great work
Pasos a seguir para restaurar un subwoofer: 1.- Tener una carpintería
Restaurado alto falante 2300 watts 😉
Sounds like I’m taking a shit after Taco Bell.
Good sir 👍
this is a cool looking sub!
And putting the amp together by yourself was for sure hard work!
btw can anyone tell me what sub this is pls?
hello from moldova👌👌👍👍
What are you spraying to get the glue off and to remove the woofer? What is that in that little bottle?
Acétone - très dangereux
😮😯🙉 Is this wood or plywood?
👌
All bro needed to do was recone it and clean it up a bit and fix the connections and it would of been perfect
Can you post the name of the stuff you're using for your restoration, like this chemical that removes adhesive and the glue for the cones? And where you get the perfect replacement parts when needed? Thanks!
Acétone
Completo,show!!!!!!!!!!
What's rattling there so much during the sound test?
Sein schlechtes Gehäuse.
his workshops roof ... lmao
It sounds like a piece of tin, rattling somewhere
They could be the windows
Fakeness, always the same song and same rattle.
Bro builds a whole system for the subwoofer
Who knows you're building enclosure and diy amplifier at the same video... I thought it's speaker restoration only 🗿? ....
Iba todo ok hasta que llego la hora de la pintura...!
It has only 1000 watt not 2300w bro
Aste uno de como arregar un woffer sony de 8 pulgadas🙏🙏
Hi, what did you use to remove the glue? I'm talking about the chemical in the little white bottle. thanks
Acétone
Acetone would dissolve the paint on the speakers parts. This is something else.
Is that 4 ohm or 8
1024 ohm
Whats the solution used for removing the rubber?
Your supposed to either fiber glass the box or carpet it
I much prefer polyester fibre in a ported box since its more easier to handle and it is safe in an enclosed environment.
Зачем портить каркас ? Можно перемотать катушку не отрывая каркас
wow
What name or type of this glue?
Maaf, toLong kasih tahu cairan apa yang di gunakan membuka membran tersebut?? terima kasih ❤
👏
Who heard the door shake
👇🏼
Kitna price aaya
what's that liquid used to remove the glue..??
What brand is that sub
where do you get the speakers from?
WOULDNT IT, BE BETTER, TO APPLY THE GLUE, WITH A SYRINGE ? ALOT MORE, PROFESSIONAL, TOO **
If you're going to go to all the trouble of fixing it, why didn't you re-paint the speaker base and make it look half decent.
Just seems like a lazy restoration to me.
Фазоинверторы 50мм ? Один свист трубы будет. Нужно 110мм минимум при таком подвесе.
Ну а в
конце при прослушке вообще не понятно что у вас дребезжит помещение или сабвуфер разваливается уже . 2300вт если только pmpo
В коментариях одни глупые и восторженные комментарии.
Все плохо сделано . Видно что человек вообще далек от этого.
...cosa c'è nella bottiglia?....con cosa scolli le sospensioni dell altoparlante?
Acétone
Do u guys do repairs for ppl outta state if so I'd like to send an Amp to you that needs repairs done to work again please let me kno thanks I like the work u do I follow u as well
What liquid chemical is used to remove the old surround and spider?
Acétone - très dangereux
05:20 what is that ??? a lissard ? on the right corner of the wood :D
Is it worth it?! Sourcing the right components, etc. If you had a workshop, and equipment, then yes !
These people do it as semi-professionals. You have to have the right contacts, and materials to cannibalize.
Ne vale la pena?! Reperire i componenti giusti ecc. Se avessi un laboratorio, e attrezzature, allora si !
Queste persone lo fanno come semi professionisti. Devi avere i contatti giusti, e e materiali da cannibalizare.
17:29 😂
Там точно 2300? Может 300?
У меня в 8 дюймовом самсунге 100 ватном, катушка чуть больше была.
What is the name of the liquid to remove the glue?
Acétone - très dangereux
bro that amplifier can barely output 800 watts so the subwoofer max power is 800-1000 watts
That transformer looks like 250 Watts, so RMS will be below that anyway.😂
Единственное что нужно было сделать переклеить подвес и все,ну и продуть дин от пыли,а автор развез это на сутки🤣🤣🤣да и катуха уже была ремонтная судя по надписям изнутри,с завода никаких надписей нет
Excellent
Sounds terrible; can’t tell if it’s rattling something in the background or if it’s the sub.
That's the garage rattling
Смартфон Vivo
Короб не под этот саб. Слышно по звуку что не хватает объёма
What is the name of this loud speaker? 🤔🙂
It's nowhere near 2300 watts.
Какие 2300w????? Откуда им там взяться????🤦♂️🤦♂️🤦♂️🤦♂️
Alot of work for a poorly assembled unbalanced result. Now throw it in the garbage.
I have reconed a few speakers, over the years, and have never the term "balanced" in reference to loud speakers.Could you share what that is with us?
Looks like about 16mm xmax. Nope.
Усилитель слабоват😢
Сборка ужасная. Не проклеил стенки короба. Не проклеил посадочное место под динамик и под плату. Гермитизации никакой. Шумовиброизоляции никакой. А потом хотите хороший звук?
Que animal ni un cajón saben aserr😢 que pena por el parlante
Sounds like tin can
what is voice😂
That shit isnt anywhere NEAR 2300watts.
2300w through wire of less than 0.5mm. yea right. 0.51 wire at 4 ohms would be around 50m of wire and could carry about 0.577A . 2000w/0.577 A = 3.466 Kv HaHaHa I recon 400w rms max
WHAT IS THAT ? A BASS DISC ? IT SURE AINT GOT ANY SUBSTANCE, NO LONG THROW ?
Я того мир ебал. Нужно то было катушку заменить с подвесом, а короб хотя бы в JBL рассчитать. Параметры тс стопудово никто не снимал. Они наверное и не знают что это такое. Насчёт пайки я вообще в ахуе - кондёры первыми паять, это же пиздец. Сначала впаивают самые низкие детали, а потом по возрастающей. Про паяльник я вообще молчу, хорошо хоть топор на костре не нагревали чтобы платы сваять. Да-а-а а-а-а-а-а 😖
Sounds like sh... as expected
Another fake restoration 😂😂