@tuffy3637I feel like I just watched the actual video. All that was missing was cramming the car into a hole in a concrete barricade full send. "Oh no, what happened??"
Sweet! The battery tray was originally made for soft case lipos, but great fix showing how to fit hard case batteries! We will also be working on a new brace for that G2 motor. Also for gearing, to run even larger pinons, any spur gear meant for our Dragsters is also compatible. We have as low as a 50t spur, part# PRQS2079 (stock spur gear is 55t). Thank you Joe for the great overview, we can't wait to see it rip!
Spektrum 5000mah 4S hard packs fit. 138x37x47. Zeee 5200mah fit. I just used a piece of foam to raise my 138x48x49 4S 6000mah packs to the height of the aluminum bracket... no need to cut it. I added a thin foam to the rear brake cable to keep it from hitting the chassis when driving. The right side of the front light wiring harness needed an extra cable stay to keep it out of the way when removing the body. I have 2 bodies, and both were like that. Overall, it's an awesome car! I got serial #54.
Super cool. I hope someone makes a Lemans style body for these. Challengers are cool but it would be neat to see other options. It looks like it mounts pretty simply so should be doable for folks like Delta Plastiks and Bittydesign to come up with cool options
Can’t wait to see it running, would be cool to replace that brace behind the motor with a nice billet one that’s half moon to support the motor, if I get one I feel like I would relocate those break servos
I would cut the center section out. That way it mounts correctly. Then make a top brace from aluminum that you can bolt in or weld to the stock bracket
The green looks good ON this! I'm leaning towards the Furry - unfortunately without the battery you only have the one choice, I'm not too fond of the green for that. Can't wait to see this running and doing them burn outs! I would pick the same hood as well.
@@QZillasWorld I'm not 100% sure but I thought most primal stuff was known for being huge, super strong, and gas engine. Now electric motors have gotten so big they can push some huge stuff with them.
When you were going through the radio settings and mentioned throttle gain, is that referring to a gyro actuated throttle cut? Basically as the yaw of the vehicle increases power is taken away?
That's a badass rip snorting fire breathing rubber slinging smoking tire awesome vehicle have fun might be able to even race some real cars and make some money
Think im spending all that to then have to mod it to fit, what will most likely be the most popular motor combo (unless your going to chance it setting on fire with a castle system) and then having to mod it to fit 2 4s packs and no room to run it 12s? And looks like no room for any fans? Come on its not like it wasnt big enough.
When I first saw this last year, I wanted one, but I realized this is for somebody who really likes to tinker with their stuff and that is not me and the size is a little rough, I have one 1/5 scale one 1/7 and 1/8 scale and they take up so much space that I have to be very careful with buying that size. The harder to store harder to transport not saying I would get one more one day, but it needs to be very user-friendly basically ready to run. That company who put out this car has a shop not far from me in Rockland county I was going to go check them out. It seems that most stuff is for people who like building but I’ll see if they have any ready to run. And yes, I know some people like building More than actually driving that is not me. I like driving way more.
i wonder if it would be a good idea to turn braking off on the esc so its not motor braking while disk braking, or at least turned down. this thing is sick!
@@ExocagedRC yeah it’s tough to implement that feature as you scale down seeing as there isn’t a big block V8 to weight down the front end but either way it’s a nice large scale RC car
I forgot they tried to design it WITHOUT suspension.!! 😂 😂 That battery tray is pretty unacceptable on such an expensive RC, they should give you alternate battery tray solutions... They should've thought of literally everything, every motor combo, every battery configuration.!! Needing to mod this is not a good thing at all.!! If Element & other manufacturers can do it there's no excuse for Primal not to.!!
That's really awesome but i already have issues finding places to run my Infractions. Just being rwd that thing is gonna turn like a semi i bet. Even losi knew to throw scale realism out the window on the little Nascars. Maybe I'm wrong but i thing awd would have made it a much better car. Those burn outs aren't so super necessary after a couple sets of tires. Not gonna whine to much though. The first time i saw them show it off there wasn't any actual real suspension and it was skittering and bouncing across the pavement like a Walmart toy.
that thing looks sweet!!
8s power!!! street basher or 12s
Don’t you dare break one !!
@tuffy3637I feel like I just watched the actual video. All that was missing was cramming the car into a hole in a concrete barricade full send. "Oh no, what happened??"
Man 8s and 12s the burnout is AWESOME!!
@tuffy3637 or run it balls out to breakin, just how we like it 😂
Sweet! The battery tray was originally made for soft case lipos, but great fix showing how to fit hard case batteries! We will also be working on a new brace for that G2 motor.
Also for gearing, to run even larger pinons, any spur gear meant for our Dragsters is also compatible. We have as low as a 50t spur, part# PRQS2079 (stock spur gear is 55t).
Thank you Joe for the great overview, we can't wait to see it rip!
I like that it uses Kraton hubs..soo many wheel options...Mmm paddle tires
An amazing rc. Looking forward to a running video.
Spektrum 5000mah 4S hard packs fit. 138x37x47. Zeee 5200mah fit. I just used a piece of foam to raise my 138x48x49 4S 6000mah packs to the height of the aluminum bracket... no need to cut it. I added a thin foam to the rear brake cable to keep it from hitting the chassis when driving. The right side of the front light wiring harness needed an extra cable stay to keep it out of the way when removing the body. I have 2 bodies, and both were like that. Overall, it's an awesome car! I got serial #54.
Thanks for the Info, I'm gonna speed test it tomorrow 8s and 12s
I can’t wait to see this thing in action!!! What a machine…
That thing is going to be a blast! Wish we had the funds and the places to run such a beautiful RC
Soon to be the most stolen rc car.
Lmaooo
🤣🤣 oh Jesus
Lmaooo 😂
😂😂😂
The most underrated comment 😂
Such a tease! I need to see this thing run wild. 😆
Can't wait for the burn out video!!
It’s ready for tomorrow’s release. Dude I ruined the tires. LoL
@@ExocagedRC Love the burnout video. I like your videos before i even watch them! Keep up the great footage!!!
That is a sweet looking ride Sir! Mannn….
I’m glad they changed a lot from their initial prototype. Specially suspension, it was the reason I canceled my pre-orders.
Yep I almost cancelled, glad I didn't!
Man that thing look wicked , can’t wait to see it run
Super cool. I hope someone makes a Lemans style body for these. Challengers are cool but it would be neat to see other options. It looks like it mounts pretty simply so should be doable for folks like Delta Plastiks and Bittydesign to come up with cool options
I hope we do get more body options
Nice man ! That hood you like is called a shaker hood. And it’s awesome!!
Channel about to go from 76k to 176k 🔥🔥🔥🔥🔥
Oh heck yes.!!!
That thing is drop dead GORGEOUS.!!! 👍 👍 👍 👍
Thanks for showing us.!!
Very very nice. Congratulations
Man that thing just looks freaking awesome...
Clint Eastwood said it in FireFox “Boy, is this a machine”.
We cannot wait until you get it out on the road. Just beautiful
Im so glad to see this car built how id want it.
Would love to see a GTR Body for this. I still want one but can't afford one. Can't wait for the running video
Really nice rig, can’t wait to see you run it!!!🎉
You sir are correct, I am phenomenal! Your videos are as well!! Thank you
You are Phenomally Top Shelf!!
Mind blown though for an out of the box RC. Primal doesn’t play around!!!
I can't wait to see it rip around the pad, maybe some drifting🤔
Yes!!! I been waiting for someone to get this and show it off! And yes I love that shaker hood myself
Dude honestly primal rc is ahead of the game for 1/5 scale cars and trucks is insane I honestly might save up for something idk tho
I would love one myself but the monster truck alone is like 8 grand
Hell yea !!! Bout to boost me one of these
Off i had the space and more importantly the money I would love to have one!
Great job luv the explanation for this beast ❤
Can’t wait to see it running, would be cool to replace that brace behind the motor with a nice billet one that’s half moon to support the motor, if I get one I feel like I would relocate those break servos
I'm in awe 😍 nice rig and great video
I can’t wait to see it, the body is humongous.
Take him on the road! NOW!
That badboy is so wicked!
That rc is AWESOME!
Beautiful rig!
Great video. Awesome RC!
I would cut the center section out. That way it mounts correctly. Then make a top brace from aluminum that you can bolt in or weld to the stock bracket
The green looks good ON this! I'm leaning towards the Furry - unfortunately without the battery you only have the one choice, I'm not too fond of the green for that. Can't wait to see this running and doing them burn outs! I would pick the same hood as well.
Awesome can’t wait to see it go!!!!
Man you gotta to mod a 3 to 4 thousand dollar rc right out of the box! Smh! Looks like they needed more R and D. Looks good though!
it’s brand new on the market
I believe the car is really meant to have a gas engine and he just did electric motor instead. I'm not sure though.
@cd-pu5uv now that makes sense!
@@cd-pu5uvthey offer gas, electric, or rollers.
@@QZillasWorld I'm not 100% sure but I thought most primal stuff was known for being huge, super strong, and gas engine. Now electric motors have gotten so big they can push some huge stuff with them.
I'm genuinely jealous lol. Nice vid
Beautiful car😊
Bro!! Nice one…. can’t wait for my RC to come out hopefully it will complete with this.
Superb video as always mate! So watchable 👍🏻👌🏻👌🏻
When you were going through the radio settings and mentioned throttle gain, is that referring to a gyro actuated throttle cut? Basically as the yaw of the vehicle increases power is taken away?
Amazing video
Been wondering about this one and seen a few but let’s get this vid going 👍👍👍
That's a badass rip snorting fire breathing rubber slinging smoking tire awesome vehicle have fun might be able to even race some real cars and make some money
Impressive
Should try a drift gyro in it, would be amazing to build a 5th scale drift car! Especially being rwd
It doesn't turn sharp enough for that.
Amazing 🎉
Hey baby, nice ring gear!
Feels very surprising they didn’t account for people running hard case batteries
Several hard case batteries will fit. I had some that did and some that didn't.
Think im spending all that to then have to mod it to fit, what will most likely be the most popular motor combo (unless your going to chance it setting on fire with a castle system) and then having to mod it to fit 2 4s packs and no room to run it 12s? And looks like no room for any fans? Come on its not like it wasnt big enough.
BIG battery room on the sides, we fit a MAX 4 where the batteries are right now, this thing has insane power potential.
@@ExocagedRC dude you litrally had to grind off parts, counter sink parts, make parts, and the motor didnt fit!
Dang that’s a beast!
personally , I'd just buy the RTR brushless version 🤣 .
That’s pretty damn cool buddy👍😁😎✌️
They need a 1970 Chevelle and I’m on it😊
Thats sick
Not the yellow splitter guards 😂
First time I saw someone with those I was like "uhh, you're supposed to take those off.." 🤦♂🙇♂
Very cool
This car is a Beast ❤
Holy hell this thing is bad ass. Wonder what the gas version sounds like.
A weed eater or tiny dirt bike. It's still a little 2 stroke motor.
I’m all in for a ‘69 Charger
When I first saw this last year, I wanted one, but I realized this is for somebody who really likes to tinker with their stuff and that is not me and the size is a little rough, I have one 1/5 scale one 1/7 and 1/8 scale and they take up so much space that I have to be very careful with buying that size. The harder to store harder to transport not saying I would get one more one day, but it needs to be very user-friendly basically ready to run. That company who put out this car has a shop not far from me in Rockland county I was going to go check them out. It seems that most stuff is for people who like building but I’ll see if they have any ready to run. And yes, I know some people like building More than actually driving that is not me. I like driving way more.
Shouldve got a infraction!
That is amazing !!
I saw the car in person both versions that shit is crazy. I want one.
A titanium chassis plate is a must
i wonder if it would be a good idea to turn braking off on the esc so its not motor braking while disk braking, or at least turned down. this thing is sick!
Yeah totally doable with this setup
Would love to see primal come out with a hoonicorn truck body for this in tribute to Ken Block
Wow😮
Where do I get one. I have a 2016 Challenger. This would be cool to have at car shows
I need one how much I do the 1:10 scale but I want to get in to this one I really love it %100
i love the passion.🔥🔥💪
Damn kid in a candy store.
I’d rather just have a FG for half the price
Mopar or no car ❤
THAT HUGE
They even replicated the goofy ass yellow manufacture yellow splitter protector! Does it come off? Or is is up to the buyer to remove it?! LoL
I'm sure it can come off
What do you do for living or are you TH-cam full time. Love the channel
TH-cam fulltime plus affiliates plus website plus the park.
They should really open up the motor mount. Shouldn't need to modify the motor mount fir a 1/5 scale electric.
I ain't got that kind of paper money
Very cool car too nice for me 😂😂😂😂
I wonder if line lock will hold the car still for burnouts or just push the front end like other cars … will be amazing if it works
Today it slipped but got better as I drove it, then it started just pushing the tires around lol The brakes needed to break in a bit
@@ExocagedRC yeah it’s tough to implement that feature as you scale down seeing as there isn’t a big block V8 to weight down the front end but either way it’s a nice large scale RC car
PRETTY BAD ASS 🤙🤙🤙🤙👍
I forgot they tried to design it WITHOUT suspension.!! 😂 😂
That battery tray is pretty unacceptable on such an expensive RC, they should give you alternate battery tray solutions...
They should've thought of literally everything, every motor combo, every battery configuration.!!
Needing to mod this is not a good thing at all.!!
If Element & other manufacturers can do it there's no excuse for Primal not to.!!
size of it🕺🏼
❤
Freaking awesome
It’s sad that even the RC Challengers still have the yellow splitter guards on them after being purchased. 😂
Ginormis 😊
I wonder if you should turn the braking on the motor off
Yeah I sure can, as it sits it seems really good with the dosk brakes as they are.
Where can I get one you're the first one I've seen that one where do you buy it
Looks affordable.
Move engine brace outside maybe?
That's really awesome but i already have issues finding places to run my Infractions. Just being rwd that thing is gonna turn like a semi i bet. Even losi knew to throw scale realism out the window on the little Nascars. Maybe I'm wrong but i thing awd would have made it a much better car. Those burn outs aren't so super necessary after a couple sets of tires. Not gonna whine to much though. The first time i saw them show it off there wasn't any actual real suspension and it was skittering and bouncing across the pavement like a Walmart toy.
Its better than I thought