I started the vid Friday night and its monday now?😶 Receiver boxes can get quite frustrating 🥵can actually feel like a job,you just don't get paid! 10 lbs of 💩stuffed into a 1 lbs bag🤢
The big reefs servo the best there expensive and perform way better then any other there 1/5th scale $500.00 servo the only one that really make a difference over stock
I bought that same servo for my k8 and I didn't like it much over stock... I got rid of it and got a hitec D845 and that thing is a monster... Try it next time they cost 110 best servo I've used.... I put one in my dbxl-e 2.0 and it throws the front wheels like a rag doll 💯
Have an outcast 8s. What does the servo arm connect to? The piece that goes back and forth to turn the wheels? I have lost the original screw that connects the servo to the car. And every one I get snaps about 30 seconds of driving. Any e know what I need to do to fix this problem?
What's a good servo upgrade for a 6s kraton. Do you think the hobbywing max6 with 1100kv motor combo upgrade will do standing backflip on a kraton 6s platform
Yes but the 1100 kv is to big motor spins to slow you need around 1700kv to 2200 kv for the wheel speed along with torque to flip the rc car 2k to 1700kv should work 💯💯
@@earlmoorhead5555 Thank you. I wasn't sure. I thought the 1100kv was more crawler. I want to save my 6s power supply for a notorious/ outcast roller if possible. Or just a back up
Alot of respect and have watched for a few years now.I gotta say just one thing OK don't take this the wrong way man From one white guy to another goddamm earl it's Pronounced save ox servo say it with me savox 🤣🤣🤣🤣🙃 Not cervical cervux r whatever servoxes 😭💀 Well just had 2 throw that shit out there Again a ton of respect for you earl I will admit I use your own advice and videos to guide me in the right direction before I commit to purchasing a big pile of shit aluminum and only the finest composites products from arrma of all places especially great video OG.
Hey what's a good servo for a built up Arrma Granite??? I mean it's really built up I got a giant 4276 2200kv motor and now have a spektrum 185 smart esc sitting in it.. I had my dad build n ship me a few custom parts for it. He has fully customized Arrma Granites and big rocks and a really bad ass Notorious and a big ol outcast 8s same color yours is. But he builds custom parts like one off parts nobody else has. Like metal center drive shafts for the granite and big rock and outcast 4s ect.. but anyway he built me some custom parts for my rigs and Shipped em to me n my wife. So I got a custom esc mount and custom servo mount all aluminum in two different colors he left one normal and just polished it up and the other is anodized neon green looks so awesome. But I need a bad ass servo for it cause it's a stupid fast and bullet proof Granite and I got the Vaterra RC C10 truck body on it and omg it looks so damn nice with those 2.8 proline interco Super swampers on it.
Changing stock servo out of arama outcast 8s to a savox servo and you changed the box that u put the new savox servo if that helps u got the box from arama ?????
The servox I used really didn’t work great for the price I find upping the BEC voltage to 8.0 really helps the stock servo and I believe power hobbies has a good cheaper servo if you need more 👍💯
If it takes two hours or two weeks one thing we should know by now is,🤔🤔 it'll be a thorough analysis and solution!!!! Love all the videos, keep em comin,I love the problem solving aspect of the vids 😎😎✌🏾✌🏾
![Arrma Kraton/ Outcast 8S Servo Umbau Power HD 65kg/ GPM Servo Saver [2/3]](http://i.ytimg.com/vi/51Ety801k5M/mqdefault.jpg)
FIRST! 🤦🏻♂️ really…. I did that. Honest. I’m a grown man…I only play with toy trucks….
🤣🤣
I started the vid Friday night and its monday now?😶 Receiver boxes can get quite frustrating 🥵can actually feel like a job,you just don't get paid! 10 lbs of 💩stuffed into a 1 lbs bag🤢
What's the part number or what is the vehicle that has the full size servo box? Trying to track one down.
It’s an arrma part comes with the ExB roller 8s look at horizon parts list for the number
@@earlmoorhead5555 got it. Looks like ARA320553. Thanks.
Appreciate new to 5th scale vehicle
Will I need a new esc for that servo? I have the outcast 8s exb v2 that’s been out a few months now
But I’m willing to pay so what servo would you recommend if it was you in my situation in 2023
The big reefs servo the best there expensive and perform way better then any other there 1/5th scale $500.00 servo the only one that really make a difference over stock
I bought that same servo for my k8 and I didn't like it much over stock... I got rid of it and got a hitec D845 and that thing is a monster... Try it next time they cost 110 best servo I've used.... I put one in my dbxl-e 2.0 and it throws the front wheels like a rag doll 💯
Have an outcast 8s. What does the servo arm connect to? The piece that goes back and forth to turn the wheels? I have lost the original screw that connects the servo to the car. And every one I get snaps about 30 seconds of driving. Any e know what I need to do to fix this problem?
That servo is over rated IMHO. You can get a JX2070 that is faster and stronger for only $40. Why pay $200 for the Savox😮?!?!
Yep that’s why I said I don’t recommend it 💯💯
Can you do a range test stock vs stock aroma vs traxxas
I can traxxas normally has more range tho but arrma new controls might be about the same now
What's a good servo upgrade for a 6s kraton. Do you think the hobbywing max6 with 1100kv motor combo upgrade will do standing backflip on a kraton 6s platform
Yes but the 1100 kv is to big motor spins to slow you need around 1700kv to 2200 kv for the wheel speed along with torque to flip the rc car 2k to 1700kv should work 💯💯
@@clayton8465 That's the more logical route and most likely the path. Thank you.
@@earlmoorhead5555 Thank you. I wasn't sure. I thought the 1100kv was more crawler. I want to save my 6s power supply for a notorious/ outcast roller if possible. Or just a back up
I love this motorpool videos, I learn so much. Thanks again Earl. Sending my salute from Puerto Rico 🇵🇷.
Thanks 🙏
Alot of respect and have watched for a few years now.I gotta say just one thing OK don't take this the wrong way man
From one white guy to another goddamm earl it's Pronounced save ox servo say it with me savox 🤣🤣🤣🤣🙃
Not cervical cervux r whatever servoxes 😭💀
Well just had 2 throw that shit out there
Again a ton of respect for you earl I will admit I use your own advice and videos to guide me in the right direction
before I commit to purchasing a big pile of shit aluminum and only the finest composites products from arrma of all places especially great video OG.
hi Earl will that servo work on the 8.4 volts? looked it up just says 6.0 or 7.4 thanks
Yes I run it on 8.0 on all arrma 8s line servos 🔥🔥👍👍
@@earlmoorhead5555 awesome thanks Earl. How do you like the servo ? I'm sure it's a lot stronger than the stock one I have. It's terrible lol.
Yes way better 🔥🔥
@@earlmoorhead5555 thanks 👍👊
Hey what's a good servo for a built up Arrma Granite??? I mean it's really built up I got a giant 4276 2200kv motor and now have a spektrum 185 smart esc sitting in it.. I had my dad build n ship me a few custom parts for it. He has fully customized Arrma Granites and big rocks and a really bad ass Notorious and a big ol outcast 8s same color yours is. But he builds custom parts like one off parts nobody else has. Like metal center drive shafts for the granite and big rock and outcast 4s ect.. but anyway he built me some custom parts for my rigs and Shipped em to me n my wife. So I got a custom esc mount and custom servo mount all aluminum in two different colors he left one normal and just polished it up and the other is anodized neon green looks so awesome. But I need a bad ass servo for it cause it's a stupid fast and bullet proof Granite and I got the Vaterra RC C10 truck body on it and omg it looks so damn nice with those 2.8 proline interco Super swampers on it.
Lol your into is almost the same as Third phase moon youtube channel 😂 I thought I hit the wrong video for a sec untill I see your work station
Is there anyway I can get a part number was going to put a savox in my outcast 8s the same truck altogether
Not sure the video your watching it just shows me a comment 😳🤔🤔
Changing stock servo out of arama outcast 8s to a savox servo and you changed the box that u put the new savox servo if that helps u got the box from arama ?????
The servox I used really didn’t work great for the price I find upping the BEC voltage to 8.0 really helps the stock servo and I believe power hobbies has a good cheaper servo if you need more 👍💯
Thank u but already bought it stuck with it
If it takes two hours or two weeks one thing we should know by now is,🤔🤔 it'll be a thorough analysis and solution!!!! Love all the videos, keep em comin,I love the problem solving aspect of the vids 😎😎✌🏾✌🏾
you made that look easy earl dose it hurt the ESC to turn up the BEC voltage?
No more about the voltage thru the receivers if to much stuff runs off the receivers they can burn out 💯💯
@@earlmoorhead5555 thank you earl. i think i got it.
Why is the max 6 the only esc that goes to 8.4?
The true 1/5th stuff just need torque not power so they cap at 7.4 and they say run a BEC external if you need more 🤷🏻♂️🤷🏻♂️💯💯💯
@@earlmoorhead5555 ok? That's weird
Great install and like always I just learned something new👊👊💯💯
What should I do to run a high speed gear full time???
Great video Earl! 👏
Keep up the good content! 👍
Nice buddy
Thanks 🙏
Can’t wait for the run of this with the new servo 😎
Earl the tops are the same lol 😂