Magic Chef Portable Washer Install
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- In this video I unbox and show you how to install the Magic Chef 0.9 Cu Ft. Portable Washer, great for apartments or locations where regular washer hookups are not available. All you need is a faucet or some source of water and a place to drain the water.
Check out my video about water supply hookup and drain line setup tips:
• Portable Washer supply...
Best video ever! No music, no ridiculous amount of talking...perfect!
SOME narration would have been nice though.
Ive had this washer (the 1.6) for almost 2 yers and all i can say is that it's one of the the best purchases I have ever made!
How many clothes u can put in ?
#Warrior4SSR I have a 0.9 cu ft one and I can put a weeks worth of my own clothes in with no problem. Like 2-3 pairs of pants, 3-4 shirts, and a bunch of underwear and socks. The 1.6 will be able to hold nearly double of that so pretty substantial.
I cant seem to understand stand mine. Sometimes it doesnt let me choose how long I want to wash and spin for. Its super annoying. And stops and puts more water and washes again every 5 mind.
Would u suggest getting a $50 4 year protection plan?
Thank you for have the patience to show how you hook up the line to the sink. You are the only video I have watched show this. Thank you very much.
what a nice comment, you have a great day!!
@@yeslawrence Hi, mama. Could you tell me if your washer is still working, and if how many loads per month on average you use it? Im trying to decide if i should purchase the warranty with the one im getting thanks
@@moderaterevolution504 it's still working great, we probably do about 10 loads a month give or take with no signs of it slowing down. the lint filter is sort of falling apart on one of the edges is the only thing. As long as you make sure not to overload it, and clean out the filters regularly these little washers should probably give us many years of great service. I repeat don't overload it, if it gets overloaded it will eventually mess it up.
@@yeslawrence ok thank you for responding good to hear
Finally someone who doesn't have a 30 minute intro to something we already know they're going to show us
I had mine for 2 years and it finally broke! It was a good washing machine!! If my daughter didn’t use so much laundry everyday I’d buy it again lol! I got a bigger one and I’m waiting for it still! 🤩
How is the bigger one holding up? Get the 2.0cuft or the 3?
I also have the 1.6 magic chief for two years love it so very much
I’m waiting for our 2.0 to be delivered today. Glad your going step by step for us...or me.
Thank you for the video. You were very patient. Hooked my washer up according to your video. Works great!!! Again thank you.. 😁😁
Bcuz of your informative video. I purchased this washer from HomeDepot and I LOVE IT. Amazingggg it's so quiet and fits discreetly in a corner, I purchased a stand that holds all my landry supplies neatly. However I must laugh 😄🤫at myself bcuz you CLEARLY said the water drains rapidly and OMG it does🤦🏽♀️. I purchased a plastic 5 gallon gas container thinking this would work so I could multitask.My MISTAKE🤷🏾♀️ it didn't 😂. Now I must buy a longer drain hose. Can you make a video explaining how to install a longer hose please 🙏🏽
Thank you so much, your review was short and sweet.
Just got mine today! Excited. I’m just waiting on the water adapter now, since my faucets are not compatible. Thanks for the vid! 👌🏾
Wow, I've been trying to purchase but out of stock. Where did you get yours? Is it .09 or larger?
they seem to come in and out of stock online at walmart and home depot. they have some in stock now actually (different sizes 0.9, 1.6, and 2.0) but not sure how long they will last.
I’ve been scouring the internet for a portable washer but it seems that every retailer is out of them. It appears that because of the current lockdown every apartment dweller on the globe has purchased them.
Home Depot still has some of these in stock online for $201.02. I know what you mean tho it took a while for us to find one: www.homedepot.com/p/Magic-Chef-Compact-0-9-cu-ft-Portable-Top-Load-Washer-in-White-MCSTCW09W1/301140409
Thank You
Hey Bruce I had the same issues and home depot was all out of stock daily, so was everyone. I wanted the 2.0 or the 3.0, but had to settle for now for the 1.6 I bought from walmart.com. $224, plus tax $240 and is on its way, by Tuesday. So 6-7 day delivery for free. Coming FedEx. I also purchased the 3 yr warranty for $34. Btw, the price for the 2.0 was $270 and the 3.0 was $475 (Amazon) See links below. Be sure to refresh the pages daily to see if it came back in stock. Hope that helps you out. Love Chris
www.walmart.com/ip/Magic-Chef-2-0-cu-ft-Compact-Topload-Washer/303208863?selected=true
Looks like the 1.6 is now out of stock too, but look at the price they listed! Hold it to them Bruce lol and say you want that price when it comes back in stock!
www.walmart.com/ip/Magic-Chef-1-6-cu-ft-Topload-Compact-Washer-White/745796743?athcpid=745796743&athpgid=athenaItemPage&athcgid=collection&athznid=532026905_collection&athieid=v1&athstid=CS020&athguid=580f07a6-04e-171330784408d2&athancid=null&athena=true
www.amazon.com/gp/product/B07N892KP8/ref=as_li_tl?ie=UTF8&tag=rachaelxo04-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B07N892KP8&linkId=9475421a7f51d2ad2616149e71f24761
Go to Walmart online that’s where I purchased mine. They are selling out fast!
Lol Bruce you hit the nail on the head with your observation. Even my local selling sites Offer Up and Letgo seem to have very low inventories, unlike prior to the pandemic.
Make sure you “pause” the washer not unplug it because then it will lose its settings and start all over again.
Uddktjd f
Dude, you’re simply awesome! Very well and thoughtfully made video! You nailed it!
My rca 3.0 washer and panda dryer 3.5 just came back a few days ago and my family loves them!
If I may ask where did you purchase the RCA 3.0 washer? Everywhere I’ve looked it’s sold out. Thanks in advance
I am thinking about getting this for my daughter
Thanks so much for the walk through! I'm ready to do some laundry now :)
Thank you for the video and showing the bottom as it looks easy to fix or trouble shoot issues if any arise. I have the 1.6 on its way and hope its the same set up.
its kind of crazy how simple these are, it's just little motor to spin the tub and a water/drain pump! Hopefully no issues arise but yeah everything looks pretty easy to get to if needed
You don’t want to go so tight on things with gaskets because you’ll create an imprint over time which will compromise the seal. Maybe a little more than finger tight is sufficient.
You don’t mention a lint trap for the end of the hose. You can’t really see the lint coming out in the water but it’s there and it will mess up your pipes if you don’t keep it out. They are only a couple bucks at Lowe’s.
Put a nylon sock over the end
Great demonstration and how to install it, I wish we could know how many pieces of clothes you used.
Sumthng i saw once said "girl cood wash 1 kingsz sheet," not tht tht is a lot of help, but mayb gives 1 an idea,,,,,,??? I jst got the 0.9, still setn it up,,,,, iv noticed a hose type tube n the underneth tht i cant c or tiuch wher it comes frm,, & there r 2 hose type clamps tht seem 2 b 4 ??? nutn, i dont kno,,, ???] Im thnkng mayb its 4 an ovrflow, tht id realy hate 4 it 2 cause problems/water n floor,,, im n an apt, my landlord mite not take vry well if i flood his floors,,,,,,, ??? ??? Thes videos r not vry helpful whn it comes 2 the underside of the machine,,,,,, ???
My son just brought me this washing machine I'm trying to figure it out now
Thank you so much! It is helpful!
Fine video and thank you, I'm setting one up myself now.
I'm a little disappointed you didn't put on the bottom plate. The bottom plate I got with mine fits so poorly I wonder if it was meant for another model.
This washing machine is outsourced to China. This same exact washer mold and some of the parts are used on Comfee, Midea, RCA, and other oddball brands. My bottom plate is missing, can you tell me if there is some gray square block looking thing that fits to the bottom of the motor or something on yours?
@@MrWolfSnack mine has that gray square block and the bottom plate! I can’t tell if I have to keep the block in there or not.
@@hayleymirabile6321 My guess is it somehow fits between the square hole on the motor frame and the bottom plate to keep the bottom plate from getting crushed in, thats the only thing I can think of.
Thank you very much! Great video, short n all the details you need
Your video is the best video!!
Thanks a lot!
Thank u so much for this video was having a hard time with hose but I have it now😊
You did a good job on the video..no chatter about nothing lol
Thanks for the video. You showed the underside of the washer. Did you install the bottom cover plate?
Oh I was wondering what that plate was for!! I found it in the top of the box, it was above the top piece of styrofoam and almost got thrown away! I haven’t installed it yet but will at some point..
I have a gray piece of plastic that appears to go on the underneath the washer. Thing is I'm not sure where mad how it connects. Can you explain to me please
@@yeslawrence so where does it go, and how do I install it. What is it for.
About how many articles of clothing fit in load? Thanks for this very helpful video!
thanks a million for making this video
Great video thank you what about the black and decker portable washer that one was also very good reviews.
The .9cu ft Black and Decker looks IDENTICAL to this one even down to the buttons on the control panel. I wouldn't be surprised if they are made at the same factory.
Does anyone know if the drain hose can be replaced on this model? I had a leak today that seems to be coming from maybe a crack in the drain hose. But I cannot find a replacement part to buy and don't see how you can remove it from the machine to replace. Thanks for any info!
A couple of questions for any users out there. 1) can you keep the sink on the whole time and the washer uses what it needs? 2) if I put the drain hose in the sink can I leave it unattended for the whole washing cycle?
Where and how do I order the bottom button rubber of the washer. It's leaking water. The rubber it old. I'm not sure how to search for it. I have this same washer. May you help me please.
How can I get the right connection to attach from the Holes to the sink please
On your machine, have you taken the bottom cover off to look inside? Do you know if there is a second tube that comes down from the drum inside with no hoses attached to it? It's a long solid smooth clear tube? I am not sure if mine is missing a hose or not.
Informative. Thanks. What dryer brand and type are you utilizing?
just using clothes drying racks at the moment, but also looking at the panda brand and other 120v ventless dryers as well.
My is brand new but while is filling up the first time is draining the water too……. Is that normal…?
Would I be able to just pour in water manually by bucket and just monitor it when I want to rinse & spin. I know it will be a learning curve but I would rather pour the water in manually if possible & just drain it near my back door patio.
yes, i actually looked into this because I was thinking of taking it on an extended RV trip. It uses a lot of water though for each cycle, maybe not compared to a regular washer but its still a lot by bucket. I'd guess about 4 gallons for wash and another 4 for each rinse for a small load, and maybe double that for large. It's a little tricky the machine won't start washing or rinsing until it senses there is enough water in the tub, and just make sure to hit pause when u add the water, otherwise it beeps at you whenever the lid is open. And some of the wash programs have multiple rinse cycles It might take a little bit of a learning curve to figure it all out, but I can assure you that it will do it because I've done it before by just pouring water into it. Also if you use a natural detergent maybe u could use the drain water to water the lawn or landscape.
MamaHuhuDIY thank you for your reply that really helps a lot.
can you please make a video on opening the detergent dispenser? I'm having trouble opening mine and have damaged my clothes by pouring detergent directly on my clothes :(
What to do if the washer stop running out the water
Can you tell me how the spin cycle is.....does it dry them to about 75-80% and is it quiet? Does the washer shut off filling up the water on its own or do you have to watch the water level? My apartment does not allow washer and dryers but I’m sick of my nasty tenants leaving crap in the washer and dryers or taking my clothes out before I can even get down there to transfer from washer to dryer. Plus I’m trying to save $60 a month in laundry because it’s $4 for one load to wash and dry, more if the dryer doesn’t dry all the way. I had an off brand portable washer but the spinner didn’t work and it was too involved....I had to watch the water level, drain it in a bucket because I didn’t have the adjustment to hook up to my faucet. Plus, even after three rinses, after hang drying, my clothes were hard. I have an autistic child who did not like that and I don’t either. If you could let me know, thanks!
Thank you.
Great review!!! Does it have a coil to heat up water or do I need access to hot water line?
Hooks up to your sink. Control temperature from sink knobs.
Thank you very much!!
Mine was fine then I needed unhook washer line attachment move it and reattach now water spurting out n I can’t figure it out . I even got another hose. Are those screens suppose to be there the blue one which is removeable and another? Maybe I lost a washer or those are screens are not set right? Can I remove the screens ? Plz help
All at the machine side connection
How do u know how much water to put on there and do u just leave the faucet running the whole time or is there periods where u turn the faucet off?
Can you manually just add the water instead of connecting to the faucet/water line?
Do you have to keep the water running until the spin cycle?
I have one it washed one load of clothes and my dryer tripped a breaker now my washer will cut on but will not run does anyone know how to fix it
Thank you!!
Does anyone happen to know how to clear E1 error code? I’ve already adjusted the hose and nothing worked.
Can you use hot water ?
I’ve used hot water before. Thing is it will also rinse with hot water unless you adjust the faucet temp before the rinse cycle. The directions are a little vague - it says to only use cold when attached to a “single faucet”, but I’ve used hot water before no problem
Did u use the bottom plated
I have something similar(KAPAS). I was able to hook it up successfully however I noticed dripping under the sink when the water would be filling up the machine. Any suggestions?
under the sink? Or do you mean dripping into the sink? If it wasn’t leaking before I’d first check all connections. Sometime when you remove the aerator there is a rubber washer that comes apart and little bits of it may prevent a tight seal to the adapter so maybe check that as well
@@yeslawrence I meant under the sink. I'll try to check the connection again . Thank you !!
That sounds more like you have a plumbing issue not related to the washer...
Make sure your supply lines from the mains to your sink faucet are tight..
I don't know what type of faucet you have but be sure the faucet itself is in good condition.. it could be something is loose or if its a single handle there is a cartridge within the faucet that could have a hairline crack causing water to leak along the base and under the sink..
There could be a lot of reasons for a leak to be happening under the sink...
If i had to guess i would think that a supply line under the sink may be leaking..
But i doubt its caused directly by the washing machine..
Hello, thank you for sharing your video. Where did you get the adapter?
Hi the adapter comes with the washer, but you can also get it from home depot, lowes, amazon, etc, you basically just need something called a "faucet to hose adapter".
Try your local hardware stores also. I took the hose in and got one for 7.99
Is the spin cycle good enough to not need a dryer?
Can this be hooked to hot and cold both on a regular washer hookup??
Is there a way to use a diverter on bathroom sink so that you don't have to keep unscrewing faucet adapter?
I put one on my shower arm and left the sink alone...
My adapter doesn’t fit in my sink
so does it use a standard outlet to plug into?
Great video! Is it necessary to use a sink faucet? Is it possible to hook up the stock hose to another hose with a 5/8 Inch ID?
Thanks! The other hose should work fine as long as the threads of the other hose fit; the hose that comes with it is the same threading as a garden hose, so it doesn't necessary need to be hooked up to a sink faucet.
@@yeslawrence I bought a diverter adapter that goes on the shower arm, it has a little lever to send the water to the shower head or to a hose fitting, and got a nice length stainless braided washer hose.
@@davidtemkin37 Thanks for the tip. Can you share where you bought the diverter and brand please?
You didn't show that there is a bottom cover that needs to be installed.
Thank you for the review... I live in an apartment with a horrible neighbor.. over all how quite is it and is there a way to make it more quite that you may know of?
It's very quiet compared to a front load washer, and also more quiet than a full size top load. The gentle cycle seems to be the most quiet but spins the clothes dry at a lower speed so they come out more damp compared to the heavy cycle, which spins faster and is thus louder.
To make it more quiet you could maybe use "anti vibration dampeners" - they have them specifically for washers...
Sorry to hear about the horrible neighbor! Hope they snap out of they grumpiness soon!
I’m going to try a dolly (flat one with wheels) and cut up a yoga mat and lay it on top of the dolly to muffle the noise.
Mr. Bean Washer Install
Can this be hooked up to existing washer hookup?
yes! it's the same size fitting as a standard washer.
MamaHuhuDIY ...l also may I ask , does the washer control the water level or do I have to do that?
Yes the washer controls the water level, u just set the load size (sm, md, lg) and it will take care of the rest :-)
MamaHuhuDIY ....thank you! 🧺
Can I hook it up to the shower instead of a sink? Hose to the shower and drain to the tub?
theoretically it should work, but you will need different adapter, maybe something like this: th-cam.com/video/tAk0CykADJ0/w-d-xo.html
you can drain to a tub but the drain hose needs to be higher than the fill level of the washer, otherwise the water will drain out before the washer fills up
I bought a diverter made by Delta (Handheld Shower Arm Diverter.) around $15 at HD. They are popular because lots of people use a handheld but still want the regular shower head. You will then need the brass adapter to go from the shower hose size threads to garden hose size. (Everbilt LFA-668 is the one I bought) You can also use a quick connect instead of that adapter.
Any ideas on that?
I did everything you did & the washer keeps draining as i fill
the drain hose needs to be higher than the fill level of the washer - can you place the drain hose a little bit higher?
@@yeslawrence THANK YOU!! ITS PERFECT NOW!!
@@yeslawrence 🤗
Do you just leave the water on the whole time??
yes I do, but you could theoretically turn it off between the wash and rinse cycles if you really wanted to.
Well I tried leaving the water on but seems like it gets backed up and starts splashing when the machine is not taking in water .I have the same hose and quick release like you used but I have to keep stopping the water after every rinse cycle
has anyone hooked up the hot water to wash, will it mess it up?
I have run hot water in it for probably close to 50 loads at this point and have not had any problems but I do change to cold after the wash cycle otherwise it will rinse with hot water too
The connection u just showed
When do you shut off the water?
usually after the load is completely done, but you have to wait a few minutes before removing the hose from the sink, otherwise water WILL SPRAY out... TBH I haven't figured out a great way to disconnect the hose after using it, I disconnect the sink end first and try to empty out any water that remains in it by shaking it. I put a towel by each connection when I release/unscrew them, since some water still comes out.
My magic chef only sprinkle the clothes as the rinse cycle anyone else with this problem?
The rinse cycle on mine fills up the washer with water, then agitates the clothes for a few minutes and then drains it. My moms top load washer (different brand) will sprinkle water on the clothes while they are spinning during the rinse cycle.
@@yeslawrence I don't understand, it is so weird, to get a good rinse i have to do a separate rinse cycle then it will rinse the clothes twice that I don't want most time, I only want 1 rinse.
@@debraaustin6573 does it do it on all wash programs? Idk that is weird, you might have to contact support.
@@yeslawrence I recently got it so i really haven't used it that must as to remember if it does, I think if I remember correctly, the heavy cycle gives 2 full rinse, but large/normal doesn't.
My dosent work