Exterior Inspection. Q3: Pushrod Stroke - “Mark & Measure”

Great Canada Driving School - 905-761-0372
Description at the bottom:
We hope that these videos give good insight on how a circle check is done.
These videos are made to compliment our students' exam preparation study programs in Ontario. This is just a part of what we offer. To get the full educational experience which prepares you for the AZ / DZ license tests in Ontario, we suggest to inquire us about our lesson packages.
We also offer private lessons, semi-private lessons, as well as class lessons, and weekly classes. (Subject to change based on government restrictions)
forms can be found here:
www.greatcanadainc.com/index....
AZ / DZ Circle Check Exam Intro for Ontario, Canada.
Собираетесь сдать на вождение грузового автомобиля в Канаде? Вы в правильном месте. Мы выпускаем профессиональных водителей с 1988 года. По регистрации и всем вопросам: 905-761-0372
Are you planning on a career that involves driving a truck with or without a trailer?
If so, then this is a great introductory video covering technical aspects of the truck driving exam. Some of the many careers that require this skill and credential are: truck driving, firefighting, bus driving, and more. We discuss the knowledge and steps needed in order to pass your AZ / DZ Circle Check Exam in Ontario. Contact us for Lessons 905-761-0372
www.greatcanadainc.com/
1750 Steeles Ave W, Toronto, ON L4K 2L7
Languages: English, Русский
AZ/DZ Exam Circle Check
3 - Pushrod Stroke - “Mark & Measure”
Pre-Steps: (must always prepare the truck for each test, and
-Put the Chocks Under the Trailer
- Release Parking Brakes (Push in Red & Yellow Buttons)
Steps:
- Start the Engine. Set Air Pressure to 100+PSI
- Report: “My Pressure is Over 100PSI”
- Turn Wheel all the way to the Left.
- Shut Off the Engine.
- Open the Hood.
- Grab the Caliper.
- Measure Chamber Diameter.
- Report: “I have 183mm”
- Report: “My Outside Diameter is 183mm. My Chamber Size is 24.”
- Report: “No STAMP, No STROKE TAG, No SQUARE PORT.”
- Report: “I Have Size 24 Standard.”
- Report: “My Adjustment Limit is 45mm”
- Put Chalk Mark on Pushrod at the Front Chamber Wall.
- Apply Service Brakes. (Use Brake Stick on Brake Pedal)
- One Click Key to the Right.
- Check to Make Sure Pressure is Between 90-100 PSI. Adjust as Needed.
- Report: “My Pressure is Between 90-100 PSI.”
- Measure Pushrod Stroke.
- Report: “I have ”30”mm” (Less than adjustment limit: “45mm”)
Major Defect: When Pushrod Stroke Exceeds Adjustment Limit.
Therefore:
”I Call Operator, I Write in My Log Book. Vehicle is out of Service.”
Post Steps: - Reset Truck
Next Video: Q.4 Tractor Protection Valve
1750 Steeles Avenue W, Office#216, 2 floor,Concord, Ontario, Canada, L4K 2L7
Телефоны: (905)-761-0372 -офис и (416)-999-7557
Skype: gcdsmichael (c 9:00AM do 12:00AM)
E-mail: [e-mail]: Viber, WhatsApp - 416 999 7557

[@Pearlowka]

огромное вам спасибо!

[@vitaliimoroziuk2968]

Спасибо за бесценную информацию!
Если это возможно, сделайте пожалуйста каждый ваш ролик с сопровождением на экране по английски - это очень большой плюс. Заранее большое спасибо Вам Михаил и вашому оператору.

[@devilson69]

what happened to push the red and yellow buttons and putting chocks on the wheels of the trailer ? lol you will get an X on this if you wont do that

[@greatcanadadrivingschool4502]

Hello! That is a great question! We mentioned it in our intro video, and we spoke about the steps needed to take prior to starting each test, and what to do after finishing. We also mentioned these steps in the description.
We hope that these videos give good insight on how a circle check is done.
These videos are made to compliment our students' exam preparation study programs in Ontario. This is made to help our students study. This is just a part of what we offer. To get the full educational experience we suggest to inquire us about our lesson packages, which prepare you for the AZ / DZ license tests in Ontario.
We also offer private lessons, semi-private lessons, as well as class lessons, and weekly classes. (Subject to change based on government restrictions)