Hi, as I mentioned in video desc. this chassis is design by Darkdragonwing - You can download it in his hoepage and there is also hardware list: www.darkdragonwing.com/creations/rc-chassis/md1/
You can use use it but it is not recommended because PLA is degrading by time an after few months chassis would be fragile... This is why I decided to print it from PETG. I used PLA only for accessories such as brake rotors and brake calipers....
Hi, all parts and hardware cost me approx. 80 euro, including wheels, motor and ESC, not including servos, battery and receiver and not including filament - I spent approx. half of spool - including scrap prints :)
finished 3D printed chassis with all hardware, including wheels, 5x servo, ESC and motor , without battery weighs 1000g ... in video description you can find linkt to 3d model - there is also list of all hardware
This chassis was developed by DarkDragonWing and his files you can find here www.thingiverse.com/thing:2841329 (it is written also in video description) Martin
i saw your videos about this chassis and audi.? where are you from? i want to ask more questions about this. because i am thinking make this for my school project. May i send you message on instagram?
Hey, chassis is not my design as I metion in my videos, but I can answer all your questions about car body… Just send me message, no problem 😉 … and I am from Slovakia 🇸🇰
Awesome! Could you give a break down of the hardware used which you mentioned ?
Hi, as I mentioned in video desc. this chassis is design by Darkdragonwing - You can download it in his hoepage and there is also hardware list:
www.darkdragonwing.com/creations/rc-chassis/md1/
Nice work. Looks good. I would not mind building one like this. 😁👍👍👍👍👍
what is the size/length of suspension?
suspensions are 55mm length.
Spec is A949-55 for 1/8 Wltoys models...
Nice work and also awesome channel!
Nice build.. 👍
Love the work! I own a real S3 8l so im very interested to see how this build goes!
Please spray it silver haha
tiene muy buena pinta ese chasis, puede que algún día me fabrique uno. Buen vídeo, like!
Did you mean i can also use PLA for RC chasises?
You can use use it but it is not recommended because PLA is degrading by time an after few months chassis would be fragile... This is why I decided to print it from PETG. I used PLA only for accessories such as brake rotors and brake calipers....
How many mms can it extend to?
Wheelbase: 257-262mm
what bolts did you use and where can i get the suspension?
most bolts are 3mm allen. Suspensions are 55mm length A949-55 for 1/8 Wltoys models, you can buy it on ebay or aliexpres
how much did all the hardware and parts cost?
Hi,
all parts and hardware cost me approx. 80 euro, including wheels, motor and ESC, not including servos, battery and receiver and not including filament - I spent approx. half of spool - including scrap prints :)
@@martinDmodels thats amazing! Ill definitely look at printing one
🔥💕👌👍
how many grams it takes
and witch part that i need to buy
finished 3D printed chassis with all hardware, including wheels, 5x servo, ESC and motor , without battery weighs 1000g ... in video description you can find linkt to 3d model - there is also list of all hardware
@@martinDmodels if chassis only take how mutch grams?
I cant tell because chassis is already assembled... But I guess, about 300 grams
@@martinDmodels ok thx for your info
files plz
This chassis was developed by DarkDragonWing and his files you can find here www.thingiverse.com/thing:2841329 (it is written also in video description)
Martin
Я поставил 333-й лайк!
Thank you for that!
i saw your videos about this chassis and audi.? where are you from? i want to ask more questions about this. because i am thinking make this for my school project. May i send you message on instagram?
Hey, chassis is not my design as I metion in my videos, but I can answer all your questions about car body… Just send me message, no problem 😉 … and I am from Slovakia 🇸🇰
@@martinDmodels i am from slovakia too.