Complete Guide to Color Tile Process
ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2022
- Learning the color tile process gives you the opportunity to create some amazing projects. Great gift ideas. Your friends and family will love it. Give it a try and see how easy it is to do.
Please consider supporting companies that support this channel (affiliate links)
xTool.com site: store.xtool.com/?ref=Z7HBgvK5...
Easel: www.inventables.com/technolog...
X-Carve: www.inventables.com/technolog...
CNC4Newbie: cnc4newbie.com/store/index.ph...
FOXAlien: www.foxalien.com/?sca_ref=684...
Amazon: Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
STARBOND GLUE: www.starbond.com?rfsn=2376834.ca9c16
15% OFF PROMO CODE pawpawsworkshop15
DEWALLIE.COM: dewallie.com?aff=6
Made the Best.com: www.madethebest.com?aff=111
=============================
Support my channel on Patreon: / pawpawsworkshop
Direct donations support my channel: www.paypal.me/pawpawsworkshop
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Official Website: www.sainsmart.com/products/ge...
Link to Laser: jtechphotonics.com
CNC4NEWBIE: cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com/store/en/demon...
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases. Purchases that you make help to support my channel.
Link to My Amazon Affiliate Store:
www.amazon.com/shop/pawpawswo...
Frequently needed supplies:
Sculfun S9 Laser: amzn.to/3KB018p
Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
FOXAlien 4040xe link: www.amazon.com/dp/B08M96HHKW/...
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Masters Shanghai Playoffs DAY 5 // 100T vs PRX | FUT vs TH](http://i.ytimg.com/vi/q75pv359eP4/mqdefault.jpg)
A friendly man talking very well. Thank you very much.
You’re welcome. It my pleasure
Thank you for all you do Paw Paw...I've learned a ton and you've gotten me up to speed on this new-fangled woodworking...I'm a 70's old school hand tool woodworker...well, I was...
I have done some of these tiles with my 20 watt ortur. Tthey came out real good. I need to get it back out this weekend and do some canvas for the wife.
That’s my next project as well. Engraving on canvas is absolutely amazing.
Thank you for sharing how to set up your test grid step by step. I was able to make my own and save it to my library.
Excellent! thanks for watching
Excellent tutorials. You are detailed! Taking your suggestion the process was successfully duplicated and expanded. At the 1:37 mark you mention the lighter color must be sprayed first. In testing, It didn't matter if the base coat was lighter that the top color, which increased color combinations exponentially. Thanks for taking the time to share your knowledge and technique.
Thanks. Your tutorials are awesome.
Thank you very much. I really appreciate that very much.
You do beautiful work!
Thank you very much
Just found this channel so helpful got into laser engraving with my dad it's brought us a lot closer this is such a cool new area for us to try out. Thanks so much for these videos!
Welcome aboard! I very happy that you found my channel. Thanks for watching
Always enjoy your videos , Thank You
Thanks for watching!
L’acétone nettoie très bien aussi.
Yes it definitely does. Thank you
Excellent and comprehensive tutelage, as per usual. Please though, if you can; demonstrate the same process only this time utilizing the Laserpecker 2. 🤔 Stay helpful & healthful, Big Papa! 👍
Good day, Sir. I've been watching your videos for quite sometime and have found that it is fulfilling to try new and different things, I too would love to do something for myself or would have the ability to do it for others. With this creative skill, and the lost art that has been taken away from many school districts it has been proven that this is still needed in our society. Many businesses use this craft and make a profit, but for personal use I myself would take to this a leisure activity that I would want to do as to teaching many people when there is hands free time and opportunities to learn an art and craft for seasonal ventures. Thank you for sharing your gifts, and talents. It has truly been an absolute pleasure and blessing to watch you at work and preferably I'd like to learn more ways to create as I follow your streaming.
Thank you so very much. I appreciate it very much. Thanks for watching
Sir. While being deployed, I was able to do some things. I made an cutting board, and an sports team logo, and amongst other things, I saw other people using their personal craftsman skills. When and on my personal time or time alotted I saw some beautiful projects. Again, thank you for your time to share with the world your calling.
Which lazer would you recommend for tile engraving and ornament engraving and cutting?
Another tip, if people find their clear coat is reacting with the paint, using water based polycrylic won't (read: shouldn't) cause blistering/peeling when clear coating.
Great tip. Thank you
Great video Phil
Wow, it’s been a while since I’ve heard from you. Coming from you, a true expert, thank you very much. You do excellent work as well.
Ottimo lavoro
BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)
My pleasure. I’m glad that you enjoyed it.
Awesome bro, awesome
Thank you
Hello I have seen a bunch of your video's, I also use light burn for my laser, they have added a the feature to make test patterns in the newer version.
Yes, thank you very much
How did you get the images to fill in (on the screen/preview) lightburn? Whenever I select a piece i want the laser to fill, the image just shows the outline so i have to look back at the setting to be sure it will fill.
Is there a difference in using the denatured alcohol and acetone?
That was very cool, thanks! I've got a project coming up that will a blue and green graphic that sits on a white tile. Can I use the same process as you did, but, using a layer of white instead of the black? Also, thanks for the walkthrough on how to set up the grid. I'd like to make a set for tile, acrylic and glass. Is there anything I need to know other than what I just learned?
You have all the information, now its time to experiment on your specific project. Let me know how it turned out.
Hi, I just wanted to let you know how much I enjoy your videos and you were a big help when I was building my CNC. Thanks for sharing all your knowledge. Also wanted to ask if you're from Louisiana because of the saints helmet, I was born and raised here and was curious if we might be neighbors lol
Thank you very much. I’m glad that my videos have helped you. Yes, I’m from Louisiana
Thanks, Sir.
You’re very welcome
Hello friends, I changed my laser head from Ts2 10W to the TS2 20W, I engrave on ceramic with the Norton method and it comes out gray not black. I tried different speed and power settings, can you please advise which are the correct settings to get good image results for the TS2 20W? In the previous laser head, the 10W I used to use speed 1200 and power 80 and it came out in black and was fine details. Should I be using different settings for the 20W laser head now? I would appreciate your answer. Thank you
Enjoy your videos. Your process seems to me to be great if you want to make a drink coaster or something for a display. I’m redoing my bathroom soon and want to add a personal touch. Those ceramic tiles have a glaze baked on to make cleaning easier, Is there a procedure to reglaze the tile after the laser has burnt thru the glaze? It wouldn’t be an issue if I was still married ( or maybe) but don’t want a few tiles that the mould can get right into.
No, you can not glaze the tile a second time.
So Paw Paw, what do you clear coat the painted and then etched tile with that will hold up better than just the paint (which I bet will scratch off).
This process will scratch. I use spray lacquer. The Norton White Tile Method will not scratch
good day I have a question dose the paint smoke or give an oder I received a engraver I haven't used yet looking forward to making projects
Yes it does use in a well ventilated area
Thank you for the detailed instructions. I have bookmarked it for future review. There is one point I was disappointed about, after a detailed painting and test grid setup there was really no description on how to evaluate the results to select the correct power. If you ever revise this video, please spend as much time evaluating the results as you spent in preparing the tiles. This is a great video.
Thank you very much for you kind words. The settings will always change with different materials. You unfortunately cannot escape testing to get the best settings
How do you achieve the variations in color in the tile?
Can you do a video of engraving a black and white photo (not an image) on a white tile? I am having problems finding the settings in Lightburn with my S9 Sculpfun that will give me photo quality engraving on tile. Your images come out great, but I have’nt seen any videos on doing photo quality engraving with a laser on white tile.
What’s setting used great job 👏
I'm seeing Lightburn version 1.0.05 on your screen. Mine is 1.1.04. Reason you haven't updated? Also, am I seeing rapid travel between where the laser fires or is the X-axis constant speed? Seems like my Atomstack A5 Pro 40W only does constant speed. Unless there's a Lightburn setting I'm missing?
You can change the white space to move faster. This reduces engraving time. I just have not updated. Yes, I should do it but not in a hurry.
Is it possible to engrave separate layers at different speed/power settings
Yes, for every layer you most certainly can change the power and speed
What exact product do you use for the clearcoat at the end. Thanks in advance. Your videos are very helpful.
Clear gloss rust oleum spray
@@PawPawsWorkShop Thanks for your help.
What do you recommend to use as a finishing clear coat? Thank you.
A spray clear lacquer coat will work just fine.
I tried that and my paint started to scale on all my pieces.
You had a chemical reaction. You have to put the clear coat on after waiting for it to completely dry. Lightly sand and then spray
Okay I am brand new to this so I apologize for dumb question. What does the colors below the black do?
It shows through the black. You are mainly just removing the black to show the color.
HI Paw Paw, are you able to get the 3 colors to show? In your video, the tile painted with 3 colors only show a shade of red and no orange!
Hi PawPaw. I have the Ortur laser master pro and just did a photo of my kids using Lightburn on a white painted tile. It turned out extremely dark. Can you tell me how to lighten it up? thanks ,Tim
Have you run a test pattern to see the best settings? Also, are you using Lightburn to setup the image?
@@PawPawsWorkShop using Lightburn have not run a test pattern. thanks
Would you be willing to share the settings you used and how you prepared the Saints Helmet? I have tried several times but cannot get results even close to what you showed.
when I say prepared the Helmet I am referring to what you had to do to the image prior to burning it.
I’m sorry I do not have the exact settings. You are looking for as much contrast as possible between light and dark. With the other settings shot for sharpness. I wish I had the exact settings for you
thanks for the video.. Looking at the background it came to my mind I'v noticed there is one country of tinkerers you always see immediatelly from wich country they are from.. .. other countries it is harder to know where they are from as they tent to create images of kittens and other cute stuff 😂
Very true. I’m very proud of my country and I’m a proud veteran. Thank you for watching
@@PawPawsWorkShop hey, thanks for the reply! the interesting thing culturally is why this is sort of a virtue in US, but quite frowned upon in almost all the rest of the world.. in europe it is basically seen as a sign you are a nazi. having a flag of other countries is sort of cool, but your own is kinda lame.. so for example I can have US flag in my US car club patch ;) I lived in US and around the world, even in China and I find these differences really interesting.. of course it matters that so many people from US are veterans.. I grew up in military family and served, but in my home country on Finland military is way less visible.. almost invisible compared to US,.. and this applies to whole Europe. In Germany where I now live, you don't see military either.. Also I am not defined by Finland or military or anything like that.. the US culture is very interesting and identifying yourself via the country seems really normal, no matter if you are left or right.. it is also a country where lot of cool stuff is created by normal people like you.., the way people create stuff is really inspiring .. the level of nationalism just makes me uncomfortable and confused.. (it is patriotism not nationalism? .. well same thing in different words to me..) .. I know every country is for themselves and every country does what ever they can.. this includes lot of bad stuff too.. this is to me reason I find it uncomportable to be "proud" of a country.. the point of democracy is, to me at least that we actually criticize our contries and take responsibility.. I don't want to be proud of a country because that would mean I have to be ashamed for it too, even if Finland for example is always on top of all kinds of graphs, like the happiest nation of the world etc..... all of it is something I had nothing to do with anyways.. how could I be proud of that?.. I think we can be happy where we were born or live in, not much more.... sorry for writing such ramblings! my point was also not to offend.. keep up doing cool project.. even your flags ;)
Every country in the world has both good and bad in their history. Many people flock to the USA for freedom. I’m not a historian, I am proud of the humanitarian efforts of my country, I am proud that the US military has been able to serve with its aid to many countries. I love the people of all countries. I find that the nature of people to be peaceful and loving. To often the governments of the world dictate the outcome of history. Thank you for your comments. You seem very thoughtful on many issues. I enjoy teaching and have helped people around the world with improving woodworking skills.
@@PawPawsWorkShop I agree, still military and the wars each country fights can be seen of course from several perspectives... I would imagine the veterans on every part of conflicts think they are "on the good side" from Finnish perspective US has mostly been the "good guys", never even declared war against finland even though Finland joined Germany against the commies.. you did help the commies to fight us though :) and without the help of Germany Finland would have fallen under the soviets.. interesting dilemma then when "rest of the world" sees the germans of that time as monsters and Russians celebrate every year the war where they bombed and invaded their neighbors... term "good guys" becomes blurry... but in general it is clear US helped Finland afterwards to survive and I am thankful for that.. now if we can deal with few wannabe dictators, Finland might join US in Nato even... still I think most of wars US started or took part are way too numerous and could have been dealed in better way.. but that is the politicians who play the games and usually lie to everyone. we see that now in Russia where war is peace and so on. .. luckily people who create beauty, teach and help others are everywhere to balance the evil in the world.. you are one of these people, so thank you! .. one good thing that happens there also is that this kind of hobbies etc unify the world and we see the countries are maybe not that important.. good people are everywhere and it is actually just one group on one planet... ok ok.. I am a dreamer 😂
Thank you for your comments. I see people from around the world and they all want peace and happiness. They want to work and raise their families. The public do not want war and conflict. You have to look to the politicians and bad leaders who start the wars. That is very disappointing. I truly wish the world could be at peace and that all of us could share our talents to make an even better world.
Can you make a video of how to make a test grid in lightburn, pplease😅
Go Saints! :-) What laser were you using?
I have several that I use, the D1 is one of my favorites.
Love the tiles and videos thank you! Btw what type of file I would need to pick from is it SVG? New to laser …been watching your vids for info/help 😊
A good quality SVG is all you need
Why do you not create a grid template on your waste board?
Just never did it yet. Most often my workbench is the wasteboard.
When using the rustoleum painters touch 2x brand of paint, using the exact same method as you, the gloss black has a bad reaction with the apple red. Ive tried it several times and always the same result. The black imediately curdles when it hits the red. I dont know if its the red or the black causing this. So far it is only with black over red. Black over gold works great.
Right now i have red drying to topcoat with white and see what happens.
EDIT 8-15-22: After some more testing, I can say for sure that it is the Rustoleum Painters Touch 2X Apple Red that is causing the reaction. Anything I topcoat it with has a chemical reaction and ruins the finish. DO NOT USE Rustoleum Painters Touch 2X APPLE RED.
Read the can label. It discusses the reaction. I have also called the company in the past to discuss the problem. Yes, you are getting a chemical reaction. Let the paint completely dry before adding the top layer
My color test tile keeps coming out gray and white ..no matter what color is under the black..do I increase speed?
You must do a grid test. The goal is to burn off the black leaving the color underneath. Further burning will reveal the white. If you are getting gray then you are most likely not burning all the way through the black. You can’t skip the test
@@PawPawsWorkShop I seem to get much better results doing the Norton full grid test..yeah it takes 45min instead of 15 but it gives me a big range of color options
Vorrei fare una incisione in nero sulla piastrella bianca. È possibile? Come si può fare?
The problem I have is that when I do the color engraving I want, the clear coat makes the paint chip and peel.
4:46 You're spraying an un-keyed, gloss, non porous surface....it's hardly surprising that the paint peels off. In fact, you're lucky to find ANY spray paint that will adhere properly to a substrate like this, especially in the long term. Don't be surprised to find that customers complain that their items are peeling or flaking in a fairly short time. Please don't think that I'm hating on you or anything...I love your work and your videos...I'm just offering an observation, based on many years' experience in this field. 😀👍👍
Thank you for your comment
What does un-keyed mean? I’m spraying exact same paint on gloss tiles let dry 24 hours slightest bump paint scratched off. Try to clean painted tile like shown, the under color disappears!! I’m doing everything the same and get bad results. Please help
@@patriotwoodworker6092 To “key” a surface means to prepare it for spraying or painting. It's generally not necessary on rough or porous surfaces, as whatever you're applying will grip onto (or absorb into) it. But when painting/spraying a smooth, non porous substrate like a tile, metal, glass, etc, you must first roughen it, maybe by using abrasive paper or wire wool etc. The surface of (say) a glossy tile can be as grease free and clean as anything, but if it is not prepared correctly (i.e. “keyed”) the coating will not stay on there for long. Hope that helps!
Hi PawPaw, I love the video, but you seem to fail to tell your audience that you used an image that has a copyright. I would hope that you would either use an image that does not have a copyright or inform the audience that this image is for personal use only.
I have discussed copyright many many times as has most every creator out there. Thank you for your concern and as always do not sell copyrighted material without permission