I’m so glad I found your video! I am planning a very similar build. We even have 10’ ceilings and the same flooring as you. I have watched so many videos in preparation, but yours is by far the best for our application.We got the TV last week, the mount comes today, our fireplace has shipped, and we are buying wood today. I so appreciate your attention to detail and your clear examples. Thank you!
I did for the finished look of the overall fireplace but I didn't use it to plan out the sizes of wood to use for the frame. I used sketchup, the free version. The mock up was very amateur because I had no clue how to use it, but it gave me an idea of what it would look like centered on the wall. Also adding blue tape to the wall really helped visualize it. But for the frame itself we just drew it up on paper.
For our setup we are 12 feet away. Bottom of tv is 57” from the ground and approximately 75” from ground to center of TV. We have no issues with neck strain. We did choose to have a TV mount that tilts the TV if we want, so ours is tilted downwards slightly. Hope this helps.
@@moderngreyfarmhouse Thanks. Also, how much above the floor did you start the fireplace and distance between bottom of the TV and top of the fireplace…
Thank you. The cost was $485 for frame and shiplap wall without fireplace. The fireplace cost will vary based on model, size and place you buy it. Breakdown: Shiplap $345 Wood Frame $140 The mantle build was $35
I see you put panels on it, which I love! Where do you live at? Been looking for someone to build the fireplace in our new house!!! Im in Washington State!
Genoviva Shelnut We are in Arizona. The panels are shiplap. There are many people in my area that do these fireplaces that post on local Facebook groups. Maybe you can find someone that way. Here they normally charge 5-10k without the fireplace so if you are able to DIY you can save so much money.
yep. It was our 1st large project so we overbuilt it out of caution and inexperience. But we are happy with it and still saved a ton money over paying someone to build it with less lumber.
You did a fantastic job. I am doing the exact same thing. Thanks for the cut list. Just wondering about tv equipment area. Did you just box it in? Is it attached to the back wall? I was thinking about leaving top of it open just in case I need to add anything. What are your thoughts. I am even doing the mantel the same way. Thanks.
Thank you. The equipment area is boxed in and attached to the 2x6 on the back wall, the reason we chose to do it this way was because our sound system is very deep. The opening is framed out taller than was needed, but we decided to lower the decorative trim to cover that area. If we end up needing to add stuff we could remove the trim to access that extra space.
Thank you. The brand is American Olean, the collection is Historic Bridge in the color Old Forge. www.qualityflooring4less.com/american-olean-historic-bridge-old-forge-tile-6-x-36.html?id=493131495319&gclid=Cj0KCQjw16KFBhCgARIsALB0g8KZIRKdappMAhUHUeAd-yLpsCSwTicbUSpyF9syMxTxd1sHld4IFqkaAlaoEALw_wcB
PS: I LIVE IN SAN FRANCISCO, CA, ARE PERMITS FROM THE DEPT OF BUILDING INSPECTION(DBI) REQUIRED FOR THIS TYPE OF DIY JOB OR NOT? THIS IS VERY IMPORTANT TO KNOW BEFORE ANY WORK STARTS. PLEASE CAN ANYONE ADVISE ABOUT THIS?
We have a cut list video here Fireplace Build Out Cut List Companion to Build Video th-cam.com/video/3OYwYIDM-W4/w-d-xo.html it was for sure over built but it’s solid as a rock.
The baseboard is 5” mdf that matches what came in our house. The trim around the fireplace itself that’s black came with the fireplace. In my review video of the fireplace I show the fireplace up close with and without the trim.
The screws mostly used are GRK #9 2.5”. Some GRK #10 4” were used for the 4 2x6’s secured to the wall and for the top frame into the ceiling. Brad nails were 2” brad nails.
Bro I have seen a couple dozen these but I like yours the best. I want to the same thing here in my house. Do you have the plans for sale? I don't care I will buy them. Do you offer consulting? I am 100% serious, please hit me up.
Thank you! I can put together some rough estimates and you can modify based of your specific fireplace, wall size and ceiling height. Give me the weekend and I’m happy to post those for you.
The area in the center is where tiny would house your cable box. The frame n the middle can be frame out as small or as large as you need it. The area inside was painted black to help disguise the opening. In the photo I have a sound bar and a ROKU device inside there.
@@moderngreyfarmhouse Totally understand. Loved the content just hard to concentrate music was repetitive. Isn’t your fault. It’s a nasty balance. Not a criticism and keep up the good work and great content mate. Love ❤️👊🏻🙏
TV way too high. People made the mistakes of proportionally place the TV and fireplace. The problem TV is not a decoration. It should be placed in the right position first then make everything else fit.
I’m so glad I found your video! I am planning a very similar build. We even have 10’ ceilings and the same flooring as you. I have watched so many videos in preparation, but yours is by far the best for our application.We got the TV last week, the mount comes today, our fireplace has shipped, and we are buying wood today. I so appreciate your attention to detail and your clear examples. Thank you!
You are so welcome. Happy building!
@@moderngreyfarmhouse good job !!
what type of wood did you use and how many did you spend in wood?
please and thank you
Fantastic job you did there….. it looks absolutely amazing when it’s finished 🙌
Thanks!
Thank for the instructional video. It gave me a much better idea of what I needed to do. Actually, just about finish with this project for the wife.
You’re welcome! I bet yours will look awesome and you saved so much $$ by doing it yourself.
Very thorough 👍
Perfect 😇
Thank you
Great!
Excellent 👌
Thank you
I follow all your DIY videos, really helpful !!! Love this ❤️
Thank you so much
Awesome thanks for posting
Great job with this makeover!! We just did a fireplace makeover too and your video was recommended in my feed. I also love your flooring! 😍
Thank you so much!
Great video! My husband and I are planning on doing this exact project this weekend, your video has been extremely helpful. Thanks!
You're welcome. If you have any questions feel free to reach out.
Did u use any software to design before you built the actually thing, i was told to use sketchup to design my wall but not sure if thats needed.
I did for the finished look of the overall fireplace but I didn't use it to plan out the sizes of wood to use for the frame. I used sketchup, the free version. The mock up was very amateur because I had no clue how to use it, but it gave me an idea of what it would look like centered on the wall. Also adding blue tape to the wall really helped visualize it. But for the frame itself we just drew it up on paper.
Nice video!! How highly would you recommend TV to be above the ground to not get neck strain if you are watching at distance around 12 feet..
For our setup we are 12 feet away. Bottom of tv is 57” from the ground and approximately 75” from ground to center of TV. We have no issues with neck strain. We did choose to have a TV mount that tilts the TV if we want, so ours is tilted downwards slightly. Hope this helps.
@@moderngreyfarmhouse Thanks. Also, how much above the floor did you start the fireplace and distance between bottom of the TV and top of the fireplace…
wow how many hours did it take for him to attach those 4 peices of wood????
Sooo beautiful!!! How much did you spend on everything?
Thank you.
The cost was $485 for frame and shiplap wall without fireplace. The fireplace cost will vary based on model, size and place you buy it.
Breakdown:
Shiplap $345
Wood Frame $140
The mantle build was $35
I see you put panels on it, which I love! Where do you live at? Been looking for someone to build the fireplace in our new house!!! Im in Washington State!
Genoviva Shelnut We are in Arizona. The panels are shiplap. There are many people in my area that do these fireplaces that post on local Facebook groups. Maybe you can find someone that way. Here they normally charge 5-10k without the fireplace so if you are able to DIY you can save so much money.
Wow, over kill on lumber
yep. It was our 1st large project so we overbuilt it out of caution and inexperience. But we are happy with it and still saved a ton money over paying someone to build it with less lumber.
You did a fantastic job. I am doing the exact same thing. Thanks for the cut list. Just wondering about tv equipment area. Did you just box it in? Is it attached to the back wall? I was thinking about leaving top of it open just in case I need to add anything. What are your thoughts. I am even doing the mantel the same way. Thanks.
Thank you. The equipment area is boxed in and attached to the 2x6 on the back wall, the reason we chose to do it this way was because our sound system is very deep. The opening is framed out taller than was needed, but we decided to lower the decorative trim to cover that area. If we end up needing to add stuff we could remove the trim to access that extra space.
Is it possible to build this without mounting or drilling into my walls for people who rent possibly on wheels
Not relevant to the video but what flooring is this and where did you get it from? Looks great
Thank you. The brand is American Olean, the collection is Historic Bridge in the color Old Forge. www.qualityflooring4less.com/american-olean-historic-bridge-old-forge-tile-6-x-36.html?id=493131495319&gclid=Cj0KCQjw16KFBhCgARIsALB0g8KZIRKdappMAhUHUeAd-yLpsCSwTicbUSpyF9syMxTxd1sHld4IFqkaAlaoEALw_wcB
PS: I LIVE IN SAN FRANCISCO, CA, ARE PERMITS FROM THE DEPT OF BUILDING INSPECTION(DBI) REQUIRED FOR THIS TYPE OF DIY JOB OR NOT? THIS IS VERY IMPORTANT TO KNOW BEFORE ANY WORK STARTS. PLEASE CAN ANYONE ADVISE ABOUT THIS?
I am not in that location so Im sorry I cant speak to what permits my be needed there. Where I live permits for this are not required.
What clamps did you use? Any link?
How long did it take you to build the framing portion?
Do you remember how many 2x4 and 2x6 you used ?
We have a cut list video here Fireplace Build Out Cut List Companion to Build Video
th-cam.com/video/3OYwYIDM-W4/w-d-xo.html it was for sure over built but it’s solid as a rock.
People need to lose the soundbar and /or the mantle when they design electric fireplace+TV combo. Such a item pushed the TV too high unnecessarily.
what did u use to finish the fireplace in the front of it?
The baseboard is 5” mdf that matches what came in our house. The trim around the fireplace itself that’s black came with the fireplace. In my review video of the fireplace I show the fireplace up close with and without the trim.
@@moderngreyfarmhouse i'l take a look. if i want to use say 12 or 6mm porc stone instead of 5 MDF would this be a similar effort?
@@jeffd8672 yes you can set the fireplace exactly where it needs to be inside the frame in order to fit the stone behind it.
Why didnt u fasten the frame directly on to the wall. You screwed then on to timbers you drilled going across. Was there a techicsl reason for that.
It didn’t line up with the studs in my walls. So to remedy that I put the 2x6 braces on the all ensuring to screw them into each stud available.
What size TV is that ?
This is a 60" TV. Not as big as most peoples these days but we dont like the look when the TV is wider than a linear style fireplace.
How deep is the wall built out?
its 18" deep
What brand and size of fireplace did you use?
This is a 74” Dimplex. When I bought it, it was called REL7 but now it’s called Ignite XL. Same fireplace different name only.
How long did it take to do this project?
It was done after work on most days. Id say it was about 20 hours split over several days.
Thanks for posting this . I am starting mine next weekend. What size screws and bard nails did you use?
The screws mostly used are GRK #9 2.5”. Some GRK #10 4” were used for the 4 2x6’s secured to the wall and for the top frame into the ceiling. Brad nails were 2” brad nails.
@@moderngreyfarmhouse Thanks so much for the reply
I thought you were being reckless but then I saw that you put your safety slippers on.
Where can we find the dimensions for all the cuts?
We didn’t compile the list of cuts since electric fireplaces come in many different sizes, and out veiling height in this room isn’t average.
That would be helpful
I added a cut list in the description of this video. th-cam.com/video/3OYwYIDM-W4/w-d-xo.html
Here’s the cut list in this video th-cam.com/video/3OYwYIDM-W4/w-d-xo.html
😂 brads
Bro I have seen a couple dozen these but I like yours the best. I want to the same thing here in my house. Do you have the plans for sale? I don't care I will buy them. Do you offer consulting? I am 100% serious, please hit me up.
Thank you! I can put together some rough estimates and you can modify based of your specific fireplace, wall size and ceiling height. Give me the weekend and I’m happy to post those for you.
I added a cut list in this video, and it’s typed out in this video th-cam.com/video/3OYwYIDM-W4/w-d-xo.html
Can someone please tell me how to make this and yet hide a cable box
The area in the center is where tiny would house your cable box. The frame n the middle can be frame out as small or as large as you need it. The area inside was painted black to help disguise the opening. In the photo I have a sound bar and a ROKU device inside there.
@@moderngreyfarmhouse thank you so much!
@@kmars3239 you're welcome.
with lumberprices today, this cost a fortune
I agree a couple months ago this would be pretty pricey. Luckily lumber prices have fallen back almost to normal.
probs easier if you explain the dogs tail should be screwed to a wall!!
Unsure what “dogs tail” is.
@@moderngreyfarmhouse that dog running around has a tail
What's that opening in the middle above the fireplace for?
That is where we have our soundbar and Roku
Great video but the music is really annoying sorry but it is. Thanks for a great video
Thanks for the feedback. Its hard to find decent royalty free music. In the future I will try to tone it down a bit.
@@moderngreyfarmhouse Totally understand. Loved the content just hard to concentrate music was repetitive. Isn’t your fault. It’s a nasty balance. Not a criticism and keep up the good work and great content mate. Love ❤️👊🏻🙏
TV way too high. People made the mistakes of proportionally place the TV and fireplace. The problem TV is not a decoration. It should be placed in the right position first then make everything else fit.
It would be nice to have to words gone they block the view of the video
That was way over framed, lol!
Yeah it for sure is.
The music killing me