I came across this channel randomly few days back and trust me you guys have made my jewellery making process much easier and much more neat!!!! Thanks a lot for making such videos and helping me out so very much!!!!!..gratefu❤l❤❤
I'm learning at home to make jewellery and in the space of 10 minutes you've taught me how to solder I feel so confident I could do it immediately and now on to gangsta pro tips... Thank you!!
sorry to be off topic but does anybody know of a tool to get back into an instagram account?? I was stupid lost the password. I would appreciate any tips you can give me
@Eden Carlos thanks so much for your reply. I found the site through google and im in the hacking process now. Seems to take quite some time so I will get back to you later with my results.
Yes I bought the mylon plier and not only did the wire make gashes and grooves in the nylon but one of the pads pulled off with the third use so use them with care. It was a famous brand about $14.
All great tips. I've been on the fence about buying the bail pilars but I'm definitely going to get some. Same thing with the triangle trays. I love my nylon pilars. I have stopped trying to wrap beads but I'm going to try again . Thanks to all of you.
I use bail pliers all the time for loops, particularly the smallest step. Never thought of using the base to not only take the guesswork out of where to make the bend, but now I'm not changing tools constantly.
Love it. I would like to see pro tips on making jump rings. I have a problem with using the jewelry saw. I know about using tape around the coil to keep rings together while sawing, but I still can't get a clean cut. I think it is a problem on how I'm holding the coil with the coil pliers on the bench pen. Any tips on making jump rings is appreciated. Thanks
Thank you ahead of time for the following. Question for Katy. About the tool as measurement. You showed how to measure for the smallest loop. How do we measure for the other sizes?
Excellent tutorial 👌 very informative I love it ❤❤❤❤❤ I am new in making jewelry and it's a lots of benefit for me. Thanks for teaching ❤ from NewYork ❤Komal Bhardwaj
Narelle, here is a link to the triangle trays JTV currently has in stock: www.jtv.com/product/flocked-tri-trays-set-of-4-in-2-sizes/BDW087?mcid=XSOjsyt
How to end the wire on necklace closures would be helpful. I've closed off necklaces and had two problems: 1. the wire end manages to expose itself enough to rub and prick the neck, and 2. The beads shift or settle enough after wearing a necklace awhile that I'm left with a little spot of bare wire at the closure which isn't pretty at all.
I like the instructions, but seriously need a background where we can see the little things in your hands. The different tips from each person was a plus. Thank you
Hey Leah! I measure starting from the tip of the wire, when making a 90 degree bend for a loop. In general though, I use the bigger bail sizes where ever I need to make a loop in the wire! Hope that answers your question - let me know if you need more clarification! Thanks! - Katy
Hi.where can I buy some plyers that don't mark or scratch? Is there a nylon coated one I can buy? Not to straighten wire but in general jewellery making. Thanks so much. Stay safe!
Just a suggestion... you may want to use a black or dark velvet cloth on the table for your videos. I couldn’t see anything you were doing. Making a loop in the last segment... I couldn’t see it with the light beige table and the gold wire. It all blended together. Also if you could zoom in on the jewelry while showing us a technique, that would really help. I couldn’t see the bead/wire work in making a “seat” for the bead tip. Anyway, thanks for all the tips!! Love it!
Can you suggest a good brand of wire that won't tarnish in a short time. Also a good brand of jewellery findings namely earring hooks, jump rings, eye pins and head pins. I want to make jewelry to sell. Thanking you for your help.
Hey Cindy! Parawire makes a great non-tarnish wire. As for the other supplies, check out out Jewel School Supply site! www.jtv.com/jewelry-making/_/N-375228644
I would like to know how you straighten beading wire, like 9 strand or whatever after it has been in a small circle? I have had a couple that don’t want to lie nice. There Is no kinks either.
Hi Debra yes! We have several different videos that use the bail shaping pliers and the one-step looper. Architectural Earrings (Bail-Shaping Plier): th-cam.com/video/1uleLns7OhI/w-d-xo.html Chakra Earrings (1-Step Looper): th-cam.com/video/KMS5gzIpq-8/w-d-xo.html
I appreciate the tips. I have a question for you. Is there a way to straighten wire before you cut it off the spool? I always find that the wire remains curved, so measuring and cutting an exact length is impossible.
Hi Rani! You can straighten the wire with a nylon straightener right on the spool before you cut it. Just pull the length of wire you want to work with and straighten from the spool to the end of the wire and cut. If your wire is going to be long, just straighten it in sections before cutting. It's that simple! Good luck!
Thanks for the reply. I will have to acquire a nylon straightener, now. No more having to cut another length of wire, because I miscalculated the length.
Hey Marwa, thanks for watching! JTV has a vast quantity and variety of beads. Check them out here! www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
Do you have any advice about how to start building your bead collection that won't cost a fortune? I get SO overwhelmed when I go shopping for beads, I want everything in the store!
Dawn, right!? Beads are so beautiful and it's hard not to buy everything! JTV does offer a wide selection of affordable beads and here is a link to those: www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt Our best advice would be to start small. Buy a strands of multi-colored beads that you can afford and save what you don't use to add to what we call "bead soup," which is just a mix of all different kinds of beads. You can also buy in bulk like a multi-gem parcel. Pretty soon you'll have a big collection without having spent a lot of money! Good luck to you! www.jtv.com/product/multi-stone-nugget-appx-4x8mm-bead-strand-set-of-10-appx-15-16-/JLW11849?mcid=XSOjsyt
Confused with how you made the loop with regular roundnose pliers. First, don't cut the wire until you know where it overlaps. And I always mark my roundnose if I do a lot of loops and they end up the same size. So the hazzle with making a roundnose loop is not as bad as you make it out to be.
Jolene, these triangle trays are amazing! Currently we are sold out of them because they are so popular. Do a quick internet search for "Triangle Scooping Tray" and you should find what you need! Also, be sure you get them in aluminum. They work the best!
I came across this channel randomly few days back and trust me you guys have made my jewellery making process much easier and much more neat!!!! Thanks a lot for making such videos and helping me out so very much!!!!!..gratefu❤l❤❤
I'm learning at home to make jewellery and in the space of 10 minutes you've taught me how to solder I feel so confident I could do it immediately and now on to gangsta pro tips... Thank you!!
Oh. My. Gaw!!! That last bale pro tip is 🤯!!!! You changed my life!!🥰
So happy it helped! We love blowing people's minds! 🤣🤯
I'm a brand new sponge soaking up everything you offer. Thank you girls. Now I see why I need a couple of triangle trays, brilliant!
sorry to be off topic but does anybody know of a tool to get back into an instagram account??
I was stupid lost the password. I would appreciate any tips you can give me
@Samson Christopher instablaster :)
@Eden Carlos thanks so much for your reply. I found the site through google and im in the hacking process now.
Seems to take quite some time so I will get back to you later with my results.
Thank you ladies. It was fun with those tools
I love watching you all,thank you!!!
Love the tips! My favorite was the tape around the finger. Brilliant!
I purchased the little trays and you are correct it is so simple for clean up.
Thank you, just what I needed about loops, and more. Every pro tip helps. The loop, the tape time saver and the bead triangle.
Yes! The first and last gave me the knowledge I needed. Thanks!
Yes I bought the mylon plier and not only did the wire make gashes and grooves in the nylon but one of the pads pulled off with the third use so use them with care. It was a famous brand about $14.
All the tips were great, thank you so much! Katy, I found yours to be the most helpful for me!
I have the beloved bail pliars but I never realized the advantage of the flat nose portion, thanks! JL
@@jeanielambert1274 Yes, me too! I use them all the time, never thought about that flat portion
thank you ladies
Purchased a Bail Pliers .Never saw this before Thank You. It will be invaluable for my Jewelry making.
Great tips! I can't wait to try them! Keep the tips coming!
Thanks everyone for your tips!! That triangle tray is the best. 😊👍💖
I'm just getting into making jewelry and these pro tips are such a big help! Thank you for your channel & PLEASE Keep the pro tip vids coming!!
All great tips. I've been on the fence about buying the bail pilars but I'm definitely going to get some. Same thing with the triangle trays. I love my nylon pilars. I have stopped trying to wrap beads but I'm going to try again . Thanks to all of you.
Great video as all your videos. Always very clear, friendly and engaging! Thank you!
😍😉 thank you, ladies for your great tips. I learning something new, love ❤️🇨🇴 Bendiciones.
Please make more of theses videos ❤️ Very useful informations. Thank you so very much.
I love the one that Katy did since I always have problems making a perfect circle. Thanks again.
How do u make the perfect spiral on wire? Love this video!! It was supper helpful!! 😭💖
Wow! Never knew about using the flat space of the nail making plier. So cool.
I just found your channel ! Love it !
I have learned a lot from ur tips. Thank u very much.
All amazing ideas. Thanks.
I use bail pliers all the time for loops, particularly the smallest step. Never thought of using the base to not only take the guesswork out of where to make the bend, but now I'm not changing tools constantly.
Very useful tips. Thank you!
Thank you!
Love it. I would like to see pro tips on making jump rings. I have a problem with using the jewelry saw. I know about using tape around the coil to keep rings together while sawing, but I still can't get a clean cut. I think it is a problem on how I'm holding the coil with the coil pliers on the bench pen. Any tips on making jump rings is appreciated. Thanks
Thank you for all of your tips it was greatly appreciated, I've learned a lot!
these are all super helpful, thank you
Very helpful! Thanks so much for sharing!
Thanks ladies all wonderful tips.
GREAT tips. Thank you.
Thank you so much!
Thank you ahead of time for the following. Question for Katy. About the tool as measurement. You showed how to measure for the smallest loop. How do we measure for the other sizes?
You could a flat nose plier and ruler, or you can try to eyeball the bend to match the loop size!
@@JewelSchool Thank you.
got interested in crafting minimalist earrings! i wanted to learn so i can give them as christmas gifts!
Awesome tips thank you
All the ladies had great tips.
Thank you girls for such great tips
I can’t believe that I never knew about the wire loop trick. How cool is that? Thank you!
Thank you so much for these tips!
Loved the tips. Thank you
Thanks to Katy for the measurement tip to make a perfect loop with 6 in 1 pliers. No more guessing now!
Great tipe!😊
excellent pro tips ... loved them!
Thanks for the tips.
I'd like to see other uses for the crimper.
Excellent tutorial 👌 very informative I love it ❤❤❤❤❤ I am new in making jewelry and it's a lots of benefit for me. Thanks for teaching ❤ from NewYork ❤Komal Bhardwaj
Katy your rings are beautiful, what is that bezel wire you have wrapped the stone in? Do you stock it ?
Thanks for the pro tips!
This is awesome! Thank you 😁👏👍🌲
Thanks for the tips!!!
Very good tips - where can you buy the triangle trays please?
Narelle, here is a link to the triangle trays JTV currently has in stock: www.jtv.com/product/flocked-tri-trays-set-of-4-in-2-sizes/BDW087?mcid=XSOjsyt
Which gauge is used for name chain making? ??
Susan you are inspiring
Where can I get those triangle trays?
Waoooooo. Love your videos. So smart
How to end the wire on necklace closures would be helpful. I've closed off necklaces and had two problems: 1. the wire end manages to expose itself enough to rub and prick the neck, and 2. The beads shift or settle enough after wearing a necklace awhile that I'm left with a little spot of bare wire at the closure which isn't pretty at all.
Awesome tips!
I want the mixture
I have a question: Do you guys have bonding pro tips? Metal to Metal
Susan loved your seed beaded bracelet looked like maybe 3 hooked together can you show how you made that?
Hi! We'll ask and see if she can do a future tutorial!
Please show how to get beaded necklaces tight for finishing.
appreciate the tips, but very difficult to see against the cream colored mat.
I wish your mat was darker and the shot was closer so we can see better. Thanks for the tips!
This is a common response and has been for years. They like it like it is, I guess.
Yeah...me too because i cant see it clearly...sorry
Need tighter close ups - can’t see.
A company that ignores their customers doesn’t deserve their business
@@violaspencer5628 that escalated quickly. Geez!
I like the instructions, but seriously need a background where we can see the little things in your hands. The different tips from each person was a plus. Thank you
Great tips. One question, when you use the bigger bail sizes on your pliers where are you measuring your wire?
Hey Leah! I measure starting from the tip of the wire, when making a 90 degree bend for a loop. In general though, I use the bigger bail sizes where ever I need to make a loop in the wire! Hope that answers your question - let me know if you need more clarification! Thanks! - Katy
I am thinking of getting started , so what is the best tip
Where do I get a triangle tray from?
Hi.where can I buy some plyers that don't mark or scratch? Is there a nylon coated one I can buy? Not to straighten wire but in general jewellery making. Thanks so much. Stay safe!
You can try a tool dip like Tool Magic! -Katy
USEFULL
Just a suggestion... you may want to use a black or dark velvet cloth on the table for your videos. I couldn’t see anything you were doing. Making a loop in the last segment... I couldn’t see it with the light beige table and the gold wire. It all blended together. Also if you could zoom in on the jewelry while showing us a technique, that would really help. I couldn’t see the bead/wire work in making a “seat” for the bead tip. Anyway, thanks for all the tips!! Love it!
Pro tip, where to exactly cut wire when making rings would be good!
Omg. I never knew about the measuring tool on the plier 😂 I thought it was for holding the wire 🤦🏽♀️
Can you suggest a good brand of wire that won't tarnish in a short time. Also a good brand of jewellery findings namely earring hooks, jump rings, eye pins and head pins. I want to make jewelry to sell. Thanking you for your help.
Hey Cindy! Parawire makes a great non-tarnish wire. As for the other supplies, check out out Jewel School Supply site!
www.jtv.com/jewelry-making/_/N-375228644
I would like to know how you straighten beading wire, like 9 strand or whatever after it has been in a small circle? I have had a couple that don’t want to lie nice. There Is no kinks either.
Have any of you used the loop making pliers excelent tool
Hi Debra yes! We have several different videos that use the bail shaping pliers and the one-step looper.
Architectural Earrings (Bail-Shaping Plier):
th-cam.com/video/1uleLns7OhI/w-d-xo.html
Chakra Earrings (1-Step Looper):
th-cam.com/video/KMS5gzIpq-8/w-d-xo.html
All of them
Could you use a dark back ground. I could not see the chain arrangement!
Hi Elsie! We hear you and that is one thing we are working on. Thanks for watching!
I appreciate the tips. I have a question for you. Is there a way to straighten wire before you cut it off the spool? I always find that the wire remains curved, so measuring and cutting an exact length is impossible.
Hi Rani! You can straighten the wire with a nylon straightener right on the spool before you cut it. Just pull the length of wire you want to work with and straighten from the spool to the end of the wire and cut. If your wire is going to be long, just straighten it in sections before cutting. It's that simple! Good luck!
Thanks for the reply. I will have to acquire a nylon straightener, now. No more having to cut another length of wire, because I miscalculated the length.
Where do you get your beads I can’t find any nice beads
Hey Marwa, thanks for watching! JTV has a vast quantity and variety of beads. Check them out here!
www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
I want the wire
Do you have any advice about how to start building your bead collection that won't cost a fortune? I get SO overwhelmed when I go shopping for beads, I want everything in the store!
Dawn, right!? Beads are so beautiful and it's hard not to buy everything! JTV does offer a wide selection of affordable beads and here is a link to those:
www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
Our best advice would be to start small. Buy a strands of multi-colored beads that you can afford and save what you don't use to add to what we call "bead soup," which is just a mix of all different kinds of beads. You can also buy in bulk like a multi-gem parcel. Pretty soon you'll have a big collection without having spent a lot of money! Good luck to you!
www.jtv.com/product/multi-stone-nugget-appx-4x8mm-bead-strand-set-of-10-appx-15-16-/JLW11849?mcid=XSOjsyt
Confused with how you made the loop with regular roundnose pliers. First, don't cut the wire until you know where it overlaps. And I always mark my roundnose if I do a lot of loops and they end up the same size. So the hazzle with making a roundnose loop is not as bad as you make it out to be.
where do you find you triangle containers,JTV ddn't have any at all when i ordered stuff the other day,I looked threw 3000 items grrr
Jolene, these triangle trays are amazing! Currently we are sold out of them because they are so popular. Do a quick internet search for "Triangle Scooping Tray" and you should find what you need! Also, be sure you get them in aluminum. They work the best!
I did not know I could measure my wire like that on my bails!!!
If you did the Demo with Larger Beads we could See it Better !
Yea. SUSAN
Hi!
Love from Gujrat Pakistan.
A spoon works better 2 spoons r quick too
Hi.
I want those beads and that many ?! Where,who and what !
Tish! We know, right!? LOL We have all the beads here: www.jtv.com/category/jewelry-making/beads/_/N-1547377695?mcid=XSOjsyt
Getting into making jewelry in between making journals. New subbie here, would love to be crafty TH-cam friends, tfs, very helpful!
Class : 2
Can't see you work against the light background.😵💫
💥💥💥💥💥
Wire
first