25 minutes of smile on my face - I rode, jumped and got sprayed with mud on me with you all virtually - Thank you very much for the video - but my Sherman S is still out of service because of hall senser error - see you all next time
@@MisterBanaszak no, I did not crash - Several weeks ago I took a faster ride as usual - after some time riding in the woods relatively steady going uphill with 35-45km/h the wheel beeped and from then on I could only ride about 25km/h before it always beeped for overload. Moving the wheel backwards triggered the overload warning immediately. After disassembly the motor I found inside a mixture of oily mud and water from 2 years of riding in winter under wet and muddy conditions. After completely cleaning up one could see that this mixture was a longer time betweeen stator and magnets and therefore rubbing (and potentially heating up) the motor. Since cleaning and putting back together now I get a clear hall sensor error. I checked cabling and made a basic Diode Test on the hall cable and sensor and that is fine. Next I have to check the sensors completely, I will use this video for it: th-cam.com/video/92aAfYXBgbg/w-d-xo.html
@azeman70 ok thanks for the info! This is good to know and we need to seal up the motor good as what I can hear in your situation… I will check the video out
Hmm what kinda riding u do? They are both great wheels but the Patton is ready out of the box… Extreme u can custom more and the travel with aftermarket suspension/linkage is nice! Both great torque… But my choice would be Patton in the end for overall better wheel out of the box!
@@MisterBanaszak ah ok, i ride 60 %street and 40% offroad/trails. My problem is that every one say: don't buy an euc without smart bms. Smart bms is so important but is that really so important for an save euc? I personly want the patton but is the extreme safer than the patton because of no smart bms?
@marcpit2806 ok for street the Patton is good but also the mini… If I charge your battery full then u will see the voltage and with the voltage u can see if there are no cells out of balance alot because then u don’t get max voltage… I rode all my wheels without BMS and the cells they use these days are fine… but if u take a bms then u can monitor it even better…
25 minutes of smile on my face - I rode, jumped and got sprayed with mud on me with you all virtually - Thank you very much for the video - but my Sherman S is still out of service because of hall senser error - see you all next time
That’s for such a nice comment!
What happend to the hallsensor? Hope u did not crash because of it…
@@MisterBanaszak no, I did not crash - Several weeks ago I took a faster ride as usual - after some time riding in the woods relatively steady going uphill with 35-45km/h the wheel beeped and from then on I could only ride about 25km/h before it always beeped for overload. Moving the wheel backwards triggered the overload warning immediately. After disassembly the motor I found inside a mixture of oily mud and water from 2 years of riding in winter under wet and muddy conditions. After completely cleaning up one could see that this mixture was a longer time betweeen stator and magnets and therefore rubbing (and potentially heating up) the motor.
Since cleaning and putting back together now I get a clear hall sensor error. I checked cabling and made a basic Diode Test on the hall cable and sensor and that is fine.
Next I have to check the sensors completely, I will use this video for it: th-cam.com/video/92aAfYXBgbg/w-d-xo.html
@azeman70 ok thanks for the info!
This is good to know and we need to seal up the motor good as what I can hear in your situation…
I will check the video out
This looked very fun. It was fun to watch as well. Thank you for sharing!
Yes was a fun day and glad u enjoyed it!
What a beautiful group Robin, for young and old ❤
Thanks! 😊 ❤️
Nice video of a nice day! Thx everyone for coming by to play in the mud with us 😂.
Yeh we did 70km of mud crawling but also a lot onroad 🫣
Nice impression of the day
Volgende keer erbij! 😉
Great group ride!
What camera you are using?
Yeh we had a blast!
iPhone 13
Nice ! 🤩
top video Robin
We had fun even with the rain and cold! ❤️
Hey. Really a nice video man. Hope you can help me! Would you buy the begode extreme or the veteran patton for the same price? Bye
Hmm what kinda riding u do?
They are both great wheels but the Patton is ready out of the box…
Extreme u can custom more and the travel with aftermarket suspension/linkage is nice!
Both great torque…
But my choice would be Patton in the end for overall better wheel out of the box!
@@MisterBanaszak ah ok, i ride 60 %street and 40% offroad/trails. My problem is that every one say: don't buy an euc without smart bms. Smart bms is so important but is that really so important for an save euc? I personly want the patton but is the extreme safer than the patton because of no smart bms?
@marcpit2806 ok for street the Patton is good but also the mini…
If I charge your battery full then u will see the voltage and with the voltage u can see if there are no cells out of balance alot because then u don’t get max voltage… I rode all my wheels without BMS and the cells they use these days are fine… but if u take a bms then u can monitor it even better…
Superrrr
Was nice to have u on the ride 🤙🏼
Where’s this?
Belgium 🇧🇪 Limburg