Great review! One tip- please play the exact same part of the song/music between different speakers/setup, with or without subwoofer. The consistency helps really pick the differences as opposed to different parts of the song being played. Thanks!
Not only that, but didn't even put the mic in the same place (if it was even the same mic), and the speakers were now on lifts to get rid of vibration. Weird way to compare.
Heyy great video! But i have a question i have krk rokit studio monitors and a focusrite but i have a 10s krk sub a older one. Do you think it is possible to use xlr from the monitors to the sub. And than from the sub trs balanced to the focusrite. Is this gonna work??
bro i just started looking into getting monitors for my crappy studio and all i see is your videos. thank you for actually being very helpful. left a like on all the ones i came across.
superb, this is exactly what I was looking for to add a subwoofer to my eris 4.5 studio monitors and audio interface. I was really confused on the interfacing but this video addressed this for me.
And so you know, the signal path in most active subwoofers doesn't simply pass signal from your sound source through to your satellite speakers. Signal will usually arrive into the active subwoofer full range, but leave the active subwoofer having been crossed over at the subwoofer's crossover point. Meaning, that the signal going to the satellite speakers will have had a high pass filter applied to the signal, cutting out the lows. Some active subwoofers give you the option of passing the signal through to the satellites without such filtering, but most do not.
I believe it's the other way around - most subwoofers have "high level output" outputs that can go to your main left and right, but in most cases they do NOT apply a high-pass-filter (HPF), but the full signal. I know because I keep researching this and find it frustrating and misleading that most subs can't effectively "split" the signal and keep the lows and send out the highs. There are a few that can, and actually the sub used in this video can do it! There's a HPF switch right there on the top right of the back panel. Airmotiv subs can also do it. You just have to check the specs (or search the Amazon comments) to know if a sub has HPF or not.
Almost learned the hard way, don't plug your laptop directly into it by a aux to RCA or have your laptop and the subwoofer plug into the same surge protector. I got a critical battery error and my laptop and screen monitor powered down but everything seems to be working fine. Will definitely try your way. Thanks
What are you talking about? The aux/RCAs are literally designed to receive input from your phone, laptop, or other devices. you dont need a scarlet for these little things
can you show the connectivity of all the components in its entirety instead of just explaining where everything should go and moving around the various cables?
Excellent review. I got the Eris 3.5's and am really considering adding a Sub8 to it as well for more better focused low end. Is that a South African accent I spot?
Idk if this will get seen but left and right have to be the same on audio interface and sub right? Like left connected to left and right connected to right?... right?
Exactly what I was looking for. I have the exact same Presonus speakers and want to add a subwoofer. Plus you have a link to the subwoofer and kept the video short. Nice work.
For those that may have been even more confused by this dude's info on balanced/unbalanced cables... TRS cables, by definition, are balanced and likewise, RCA cables, by definition, are unbalanced.
@@EdwardSmithMusic As I understand it, the TRS and TS cables are interchangeble (both will work, and with no damage to equipment) but if the devices at both ends have TRS connections it's recommendable to use TRS cables (particularly with any long distances) due to the undesirable noise accummulation on unbalanced (TS) cables. Where one or more devices are unbalanced, it's a waste of money investing in TRS cables. And perhaps it is overkill putting TRS connectors on a cable which is shorter than 1 metre anyway, unless it's for stereo purposes, which is another story.
@@Zoco101 I had issues with my studio monitors using unbalanced cables. I have JBL Pros, and they did not like them one bit. Was getting a loud humm as soon as the cable was plugged in, even with nothing plugged in on the other side. 2 different music shops kept telling me TS cables will work, for the $1 or $2 difference in price, i was pretty annoyed having to go all the way back to swap them. (now THAT was a waste of money). The big hint is right on the rear of the speaker. It says "Balanced", so you need a balanced cable. From what i remember, the receiving port in the speaker has 3 contact points, 2 of them become bridged when using TS cables, hence why I was getting noise. Your milage may vary.
thanks for the video. I have a question - Should I use a subwoofer for mixing ? The reason I got studio monitors is so that I can hear accurate sound. If I add subwoofer will it defeat the purpose of the getting the monitors in the first place ?
Is RCA better vs TRS? what should we setup the low pass bass, tremble on the studio monitors speakers, the sub, if we have say an asgard amp? thx for the help!!
Great video! This subwoofer seems to be great when it comes to connection flexibility. I have a Sony subwoofer and, just like many others, it is more of a home theater sub and it only has one mono input for bass 😂. In my case I’m using a 4-channel stereo headphone amplifier to connect the output of my laptop to both the Sony subwoofer and the Yamaha HS4 monitors, which provides more audio level control flexibility but might introduce a little bit of noise depending on the connections, cables and the headphone amp circuitry 😊
dear edward i have a question: is it possible to use eris 3.5BT with bluetooth and a sub? lets say i want to play music with a smartphone and i can use the eris, but in that case will the sub sound too? Thank you in advance and for your videos in general, great channel!!
I think you need to use the PreSonus MicroStation BT, because you connect the speakers and subwoofer to this microstation, in this configuration all the speakers get the signal from the smartphone via bluetooth.
Hey there! I’m using the e3.5BT as desktop monitors via Bluetooth (MacBook), im a casual music listener. Before I purchase the subwoofer I wanted to know if it’s possible to connect the Eris Sub8 directly to my E3.5BT monitors without a audio interface? Are you able to help? I only listen to music using Bluetooth, just an FYI. Thanks.
pretty useful video. here is the question. can i use 1) RCA to TRS CABLE and connect my subwoofer to presonus 3.5 2) can i avoid buying the audio interface. My subwoofer doesnt have the TRS jack. It only has the RCA ports. thanks in advance.
“Use the subwoofer as the centerpiece and connect the monitors into the subwoofer” - have watched two hours of these effing tutorials trying to find this information thank you brother 🫡
nice explanation! So what if my audio interface has more than 2 outputs? Could i take tha one pair of outputs to the monitors and the other one to the sub woofer? Would that make any sense? Thanks in advance!
Hi Edward. It would have been better to use the same time stamp audio playback when testing just monitors and then with subwoofer as well. So we know the bass difference.
This has been working great for me, but as I build my new home studio, I’d like to wire my room for surroundsound. I was thinking I could use my Yamaha left/right and sub and then add a couple random rear speakers and a center speaker. However, if I send the L/R audio TO MY SUB, AND THEN TO FRONT LEFT RIGHT, I’M NOT SURE HOW THAT AFFECTS THE BALANCE AND THE SIGNAL OF THE REAR SPEAKERS THAT ARE NOT GOING THROUGH MY SUBS, BUILT-IN CROSSOVER… FOLLOW ME? I’M TRYING TO GET ALL THE WIRING IN MY WALL BEFORE I DO DRYWALL BUT I’M A LITTLE UNSURE OF THIS PLAN.
Hi Edward,m great review like always! One question for everyone - would you rather go with E3.5 and a SUB or with only a pair of E5 XT or Adam audio T5V without the sub for music listening and gaming only? They are both around 300 and they both need an audio interface for another 100 so that brings the total cost to 400. On another note, I don't think there are HiFi active speakers (like Edifiers for example) and a USB DAC for 400 that would compare top the sound quality we get with any of these...Or am I wrong?
hello i just recived my presonus eris 3.5s and my only complaint is the high hats around 75-80%+ volume do distort a little bit but its not deal breaking in my opinion. but overall phenomenal speakers even the bass isnt punchy but it does vibrate my desk (even with the included sound absorber pads) none the less i hope this helps someone!
Let's assume you have a preamped turntable. Do you run the RCA cable from main monitor into the turntable's aux port like normal, and then run TRS cables from main monitor to subwoofer?
Hi, great video, made me easily understand the balanced and unbalanced sources. I want a set of speakers to hook to my PC, I'm thinking the Eris 3.5 and if I ever decide I need bass punch, I may get the sub later. Do you think an audio interface is worth it? Is the signal from the PC good enough? Thanks.
Hi! Thanks for the vid, quick question hope you can get to ASAP, do you need to have an audio interface for the set up? I couldn’t just run the trs wires from the output of the sub into the studio monitors? (Just for listening/playback )
The subwoofer is the middle man between the interface and the studio monitors. If you can connect your device to the sub without an audio interface, then I'm sure you can.
When connecting the from the sub output to the speakers, would you actually connect one cable to each of the two speakers, i.e., right output to right speaker and left output to left speaker? The video showed connecting left and right outputs to one speaker.
the speakers he's using has the power amp for both speakers only in one of them, so he'll run speaker wire to the other speaker. It's dependent on what speakers you have. They aren't all this way. Typically smaller speakers use this setup.
I have this set up except through my pc with no interface between.....and the worst thing about this, unless I'm missing something, is that once you get all of your stuff in place...the only way to adjust the volume of the sub is on the back of the sub itself. It doesn't change with the volume control on the monitors.....so if you're bumping something loud and have the sub set perfect.....as soon as you roll the volume off your monitors the sub just keeps kicking at the loud volume. Any solution to this? Any way to have the sub roll off with the volume knob on the monitors? If I adjust the volume on the pc then the whole signal to both monitors and sub reduces and it stays balanced....I just like using the volume control on the monitors I guess.
Where to place the subwoofers? Should it be placed on the working desk or under the working desk. Should it be centered or can be kept at left or right?
definitely under your desk in between your 2 monitors if they are on the desk. going to really feel the bass on the ground. in terms of kept left or right I guess up to you as long as its on the floor but ideally listening wise in between the left and right monitors
In the Eris 3.5, what would be the ideal configuration -for you- with this sub? :) I just got one and it is wonderful, but I would like to know your opinion. Thanks, great video!
I'm getting terrible audio from my turntable setup and bad feedback at higher volume. Any advice what I should change/upgrade. TT >RCA >Cheap Pre-Amp>RCA to TRS > Powered Yamaha MSP5 I'm thinking adding an A.I to replace the pre-amp and adding a sub to help when playing louder, from watching this it seems my wiring could be an issue too tho?
@@EdwardSmithMusic Damn that’s really annoying. Don’t really want to have to crawl under my desk to turn off the sub every time that I want to switch to headphones.
@@profblack I haven't bought my subwoofer yet but for that I'm probably going to plug it into a smart outlet and have it controlled by app because I understand that crawling under my desk thing
@@JLummin That’s one of the solutions that I was thinking of too. There are also some outlet extensions with a separate foot operated switch that you can get so that’s another route.
Is there an easy way how I can control/adjust the amount of bass coming from my subwoofer? I have my subwoofer underneath my computer desk and the bass adjustment is on the back on the subwoofer. It is kinda hard to reach under and adjust it. Can I have an easier solution? Awesome videos
So if I was going to connect my multi effects unit to this, instead of an audio interface (my pod go basically is an audio interface) I would just plug the cables into the pod go the same why you plug them into the audio interface?
how does the low-pass filter work? If my speakers reproduce 80 Hz - 22 kHz (M-Audio BX3BT), I set it to 80 Hz? What does this do? Does the subwoofer only send the frequencies higher than 80 Hz to the monitors? Why is there also a High Pass Filter at 80 Hz, does it do the same thing or something else? Also, if the subwoofer has Bluetooth, then the monitors don't need bluetooth, right, since they receive the full signal from the sub? Also, how do you know what frequency your are setting on the LPF, because the tags on the lines are not aligned, and it doesn't seem to be linear??
Hi @@dominickjackson1615 ,sorry I am a layman in this field. Could you explain why that wouldn't work? PreSonus claims that the two products are super compatible...
@@DDimov-nf8mi The sub passes the input into the monitors so there's no Bluetooth connectivity there. Using Bluetooth wouldn't use the sub as it ignores the input cables
Hi! Great vid - i have a Temblor T10 sub, and eris 5 - but i have a really hard time calibrating the sub. If I play pink noise and calibrate with an spl meter, the sub comes out way to loud. Experienced anything similar? Or have any tips? Thanks ;)
Confused, you plugged LEFT & RIGHT TRS from Audio Interface Main Out to two Inputs on the Sub ... however the LEFT and RIGHT output from the sub you plugged into single monitor? So how is the other monitor getting any audio signal?
@@bgtaylor89 I guess you can set it up this way and use the monitors and Sub to manage the crossover, but in most cases anyone using an audio interface with at least 6 channels would place the sub on a separate channel and manage the out that way ... sooo, I guess if you only have 2 channels of audio out this would be the only choice.
It helped, but ... Sounddemo "Just the speaker" (standing on wood) = good "Speaker with Subwoofer" (All nicely setup with acoustic foam) = fantastic You're a perfect promoter 😂 Btw, couldn't you afford 4 cables to complete the setup ? 🤔
hey man i liked the part where you didnt set anything up in the video and then the part where you compared some sad slow guitar song to a bassy dance track very good video man
lol exactly. he didnt show it all connected. he just put wires into interface then unplugged sub to monitors. literally with all the equipment he had, why not just plug everything and show it from behind. amateur instructional video…
![[FULL EP.73] เปิดบ้าน 70 ล้าน "แป้ง Zbing" ยกมาทั้งญี่ปุ่น l เคหสถานบานปลาย l One Playground](http://i.ytimg.com/vi/YBnJhTt07Pg/mqdefault.jpg)
It would have been much more helpful to me if you had played the same part of the same song to compare with/without the sub.
I second this
@@jared9407 ok
As if showing someone what speakers sound like over youtube is a good idea in the first place.
@@denizenofclownworld4853 no but it adds insult to injury
@@denizenofclownworld4853 It still would've provided some level of consistency to make a better judgement off of. This is completely useless.
Great review! One tip- please play the exact same part of the song/music between different speakers/setup, with or without subwoofer. The consistency helps really pick the differences as opposed to different parts of the song being played. Thanks!
I wanted to post the same thing. It’s kinda obvious and I’m shocked that that wasn’t done.
Not only that, but didn't even put the mic in the same place (if it was even the same mic), and the speakers were now on lifts to get rid of vibration. Weird way to compare.
Same here
Watch this for the same part !
th-cam.com/video/lpXgz4nUX50/w-d-xo.html
Heyy great video! But i have a question i have krk rokit studio monitors and a focusrite but i have a 10s krk sub a older one. Do you think it is possible to use xlr from the monitors to the sub. And than from the sub trs balanced to the focusrite. Is this gonna work??
bro i just started looking into getting monitors for my crappy studio and all i see is your videos. thank you for actually being very helpful. left a like on all the ones i came across.
superb, this is exactly what I was looking for to add a subwoofer to my eris 4.5 studio monitors and audio interface. I was really confused on the interfacing but this video addressed this for me.
And so you know, the signal path in most active subwoofers doesn't simply pass signal from your sound source through to your satellite speakers. Signal will usually arrive into the active subwoofer full range, but leave the active subwoofer having been crossed over at the subwoofer's crossover point. Meaning, that the signal going to the satellite speakers will have had a high pass filter applied to the signal, cutting out the lows. Some active subwoofers give you the option of passing the signal through to the satellites without such filtering, but most do not.
I believe it's the other way around - most subwoofers have "high level output" outputs that can go to your main left and right, but in most cases they do NOT apply a high-pass-filter (HPF), but the full signal. I know because I keep researching this and find it frustrating and misleading that most subs can't effectively "split" the signal and keep the lows and send out the highs. There are a few that can, and actually the sub used in this video can do it! There's a HPF switch right there on the top right of the back panel. Airmotiv subs can also do it. You just have to check the specs (or search the Amazon comments) to know if a sub has HPF or not.
Nah most do not sir ✌🏽
These are the exact speakers I have and you just inspired me to purchase a sub. Thank you sir.
Awesome!!
@@EdwardSmithMusic i got the speakers and sub haha hell yeah
Exactly what I was looking for! Thank you so much!!! Many greetings from Berlin!
Glad it helped!
Almost learned the hard way, don't plug your laptop directly into it by a aux to RCA or have your laptop and the subwoofer plug into the same surge protector. I got a critical battery error and my laptop and screen monitor powered down but everything seems to be working fine. Will definitely try your way. Thanks
What are you talking about? The aux/RCAs are literally designed to receive input from your phone, laptop, or other devices. you dont need a scarlet for these little things
can you show the connectivity of all the components in its entirety instead of just explaining where everything should go and moving around the various cables?
Exactly
Excellent review. I got the Eris 3.5's and am really considering adding a Sub8 to it as well for more better focused low end. Is that a South African accent I spot?
Idk if this will get seen but left and right have to be the same on audio interface and sub right? Like left connected to left and right connected to right?... right?
Hello, I'm not using a computer at all, just a mixer. So do I still need to get an audio interface to connect my studio monitors to the sub? Thanks
presonus is doing some great things
Hi, thank you for your video. What setting would you recommend on Sub8 for polarity phase and HPF On or Off when connected to eris 4.5?
Exactly what I was looking for. I have the exact same Presonus speakers and want to add a subwoofer. Plus you have a link to the subwoofer and kept the video short. Nice work.
Glad I could help!
For those that may have been even more confused by this dude's info on balanced/unbalanced cables...
TRS cables, by definition, are balanced and likewise, RCA cables, by definition, are unbalanced.
You are right! I was meant to say that people need to get TRS cables and no TS cables. Thanks for clearing the air on this!
@@EdwardSmithMusic As I understand it, the TRS and TS cables are interchangeble (both will work, and with no damage to equipment) but if the devices at both ends have TRS connections it's recommendable to use TRS cables (particularly with any long distances) due to the undesirable noise accummulation on unbalanced (TS) cables. Where one or more devices are unbalanced, it's a waste of money investing in TRS cables. And perhaps it is overkill putting TRS connectors on a cable which is shorter than 1 metre anyway, unless it's for stereo purposes, which is another story.
@@Zoco101 I had issues with my studio monitors using unbalanced cables. I have JBL Pros, and they did not like them one bit. Was getting a loud humm as soon as the cable was plugged in, even with nothing plugged in on the other side. 2 different music shops kept telling me TS cables will work, for the $1 or $2 difference in price, i was pretty annoyed having to go all the way back to swap them. (now THAT was a waste of money). The big hint is right on the rear of the speaker. It says "Balanced", so you need a balanced cable. From what i remember, the receiving port in the speaker has 3 contact points, 2 of them become bridged when using TS cables, hence why I was getting noise. Your milage may vary.
i dont udnerstand. i need a receiver or not?
I'd recommend a mackie big nob or maudio
Clear explanation . Excellent
Thanks so much for watching 🙏🏻
Thanks for sharing Edward 👍🏻👍🏻
No problem 👍 Thanks for watching!!
thanks for the video.
I have a question - Should I use a subwoofer for mixing ? The reason I got studio monitors is so that I can hear accurate sound. If I add subwoofer will it defeat the purpose of the getting the monitors in the first place ?
Exactly what was looking for!
Is RCA better vs TRS? what should we setup the low pass bass, tremble on the studio monitors speakers, the sub, if we have say an asgard amp? thx for the help!!
Thanks for that Video !!!
can you connect the sub directly to the speakers without an audio interface or anything else?
i have the same question. i hope op can answer
Rewatching this again since, im planning to get presonus eris 3.5 now instead of upgrading headphones.
Great video! This subwoofer seems to be great when it comes to connection flexibility. I have a Sony subwoofer and, just like many others, it is more of a home theater sub and it only has one mono input for bass 😂. In my case I’m using a 4-channel stereo headphone amplifier to connect the output of my laptop to both the Sony subwoofer and the Yamaha HS4 monitors, which provides more audio level control flexibility but might introduce a little bit of noise depending on the connections, cables and the headphone amp circuitry 😊
id pay money for someone that does instructional fast as hell ... too much slow time and this one isn't even that bad. Good info thanks
Thanks for watching!!
I know this is 5 months old but you can open the settings gear and change playback speeds of the videos.
dear edward i have a question: is it possible to use eris 3.5BT with bluetooth and a sub? lets say i want to play music with a smartphone and i can use the eris, but in that case will the sub sound too?
Thank you in advance and for your videos in general, great channel!!
I think you need to use the PreSonus MicroStation BT, because you connect the speakers and subwoofer to this microstation, in this configuration all the speakers get the signal from the smartphone via bluetooth.
Fantastic! Have you done this with an Apollo?? Having trouble here
Thank you for the info well explained From Puerto Rico many blessings!
Thank you so much for watching 🙏🏻
Hey there! I’m using the e3.5BT as desktop monitors via Bluetooth (MacBook), im a casual music listener. Before I purchase the subwoofer I wanted to know if it’s possible to connect the Eris Sub8 directly to my E3.5BT monitors without a audio interface?
Are you able to help? I only listen to music using Bluetooth, just an FYI.
Thanks.
Hi @Edward Smith, do you have an answer to this question?
pretty useful video.
here is the question.
can i use
1) RCA to TRS CABLE and connect my subwoofer to presonus 3.5
2) can i avoid buying the audio interface. My subwoofer doesnt have the TRS jack. It only has the RCA ports.
thanks in advance.
Yes and yes!
@@EdwardSmithMusic thank you for this
Thanks I'm a new subscriber and I love your vids
Thank you so much for watching!!
Imagine using the same song for a sound COMPARISON wow
“Use the subwoofer as the centerpiece and connect the monitors into the subwoofer” - have watched two hours of these effing tutorials trying to find this information thank you brother 🫡
Thanks this was much needed
Glad I could Help! Thanks For Watching 🙏
nice explanation! So what if my audio interface has more than 2 outputs? Could i take tha one pair of outputs to the monitors and the other one to the sub woofer? Would that make any sense?
Thanks in advance!
Hi Edward. It would have been better to use the same time stamp audio playback when testing just monitors and then with subwoofer as well. So we know the bass difference.
This has been working great for me, but as I build my new home studio, I’d like to wire my room for surroundsound. I was thinking I could use my Yamaha left/right and sub and then add a couple random rear speakers and a center speaker. However, if I send the L/R audio TO MY SUB, AND THEN TO FRONT LEFT RIGHT, I’M NOT SURE HOW THAT AFFECTS THE BALANCE AND THE SIGNAL OF THE REAR SPEAKERS THAT ARE NOT GOING THROUGH MY SUBS, BUILT-IN CROSSOVER… FOLLOW ME? I’M TRYING TO GET ALL THE WIRING IN MY WALL BEFORE I DO DRYWALL BUT I’M A LITTLE UNSURE OF THIS PLAN.
Hi Edward,m great review like always! One question for everyone - would you rather go with E3.5 and a SUB or with only a pair of E5 XT or Adam audio T5V without the sub for music listening and gaming only? They are both around 300 and they both need an audio interface for another 100 so that brings the total cost to 400. On another note, I don't think there are HiFi active speakers (like Edifiers for example) and a USB DAC for 400 that would compare top the sound quality we get with any of these...Or am I wrong?
I too need an answer for this
I would go for the Adam t7v, enough bass and not fatuiging music listening:)
hello i just recived my presonus eris 3.5s and my only complaint is the high hats around 75-80%+ volume do distort a little bit but its not deal breaking in my opinion. but overall phenomenal speakers even the bass isnt punchy but it does vibrate my desk (even with the included sound absorber pads) none the less i hope this helps someone!
I also wondered which was better. Presonus Eris 3.5 + Sub or KRK classic 5 or Edifier S350 or Sven c30. In the end, I settled on Presonus.
I respect the strength it takes to lift this sub onto a table lol. That thing is heavyy
I just purchased the Eris sub8BT for $149.⁰⁰ Nice subwoofer. Really powerful... even outside!
Great video!
Thanks for the visit!!
Let's assume you have a preamped turntable. Do you run the RCA cable from main monitor into the turntable's aux port like normal, and then run TRS cables from main monitor to subwoofer?
Nice video but I would recommand that you compare the same song with and without subwoofer.
Hi, great video, made me easily understand the balanced and unbalanced sources. I want a set of speakers to hook to my PC, I'm thinking the Eris 3.5 and if I ever decide I need bass punch, I may get the sub later. Do you think an audio interface is worth it? Is the signal from the PC good enough? Thanks.
An audio interface is definitely worth it… reduces lag and latency for days 💪🏻
@@EdwardSmithMusic hey man, thanks for your videos. I bought the Eris 3.5. They sound great. I don't need more bass.
Thank you for making this simple
What do you mean balanced? Meaning each cable is mono?
TRS cables… they have a tip, ring and sleeve
Hi! Thanks for the vid, quick question hope you can get to ASAP, do you need to have an audio interface for the set up? I couldn’t just run the trs wires from the output of the sub into the studio monitors? (Just for listening/playback )
The subwoofer is the middle man between the interface and the studio monitors. If you can connect your device to the sub without an audio interface, then I'm sure you can.
@@EdwardSmithMusic awesome, I figured, thanks dude!
When connecting the from the sub output to the speakers, would you actually connect one cable to each of the two speakers, i.e., right output to right speaker and left output to left speaker? The video showed connecting left and right outputs to one speaker.
the speakers he's using has the power amp for both speakers only in one of them, so he'll run speaker wire to the other speaker. It's dependent on what speakers you have. They aren't all this way. Typically smaller speakers use this setup.
@@braedenlane why on earth wouldnt he mention that, ay yi yi
@@theStepFamm yes hes not that good in explaining Im pretty sure hes new in audio engineering haha
I have this set up except through my pc with no interface between.....and the worst thing about this, unless I'm missing something, is that once you get all of your stuff in place...the only way to adjust the volume of the sub is on the back of the sub itself. It doesn't change with the volume control on the monitors.....so if you're bumping something loud and have the sub set perfect.....as soon as you roll the volume off your monitors the sub just keeps kicking at the loud volume. Any solution to this? Any way to have the sub roll off with the volume knob on the monitors? If I adjust the volume on the pc then the whole signal to both monitors and sub reduces and it stays balanced....I just like using the volume control on the monitors I guess.
super helpful
I am looking for a tutorial which shows how to adjust the subwoofer / monitors in regards of Split frequency, phase and levels. Can you help?
Hi.
What song was playing at time index 4:12 ?
I’m using these for tv and have an hdmi audio splitter with rca out. How do I hook a sub up to my Mackie crx8 monitors?
0:11 ... the most youtuberish intro EVER
Nothing to do with the subwoofers, but where did you get that grey square/diamond wall feature from? Looks very nice and simple
Where to place the subwoofers? Should it be placed on the working desk or under the working desk. Should it be centered or can be kept at left or right?
definitely under your desk in between your 2 monitors if they are on the desk. going to really feel the bass on the ground. in terms of kept left or right I guess up to you as long as its on the floor but ideally listening wise in between the left and right monitors
In the Eris 3.5, what would be the ideal configuration -for you- with this sub? :)
I just got one and it is wonderful, but I would like to know your opinion.
Thanks, great video!
the sub8 is going to compliment those speakers...its bass as good as a mid range and sub will back up the low end...
thanks buddy 🎉
Hey Mate :) nice Video, do you have any recommendations for a Subwoofer to pair with Edifier MR4?
Ok so I seen that to connect the subwoofer to the monitors u ran both trs cables to the monitors but then how do u connect it to ur interface ?
You run another two TRS cables from the audio interface into the 'input" section of the subwoofer.
Mentions that in the video multiple times. Pay attention!
Just a harty thank you. 😊
Hello Edward, do you recommend those Peachtree stands for these monitors? Or you think there might be a better match? Thanks!
I think they are a cool fit haha
@@EdwardSmithMusic jajja Just got these monitors and love them. Your reviews helped lots. Thank you ⭐
What chair are you using? Cheers great vid
The chair I used in the video is the Fortnight Omega gaming chair - amzn.to/2ZGgant
@@EdwardSmithMusic Thanks! i appreciate the quick reply too!
I'm getting terrible audio from my turntable setup and bad feedback at higher volume.
Any advice what I should change/upgrade. TT >RCA >Cheap Pre-Amp>RCA to TRS > Powered Yamaha MSP5
I'm thinking adding an A.I to replace the pre-amp and adding a sub to help when playing louder, from watching this it seems my wiring could be an issue too tho?
Will the power switch on the stereo speakers also power off the sub?
Nope
@@EdwardSmithMusic Damn that’s really annoying. Don’t really want to have to crawl under my desk to turn off the sub every time that I want to switch to headphones.
@@profblack I haven't bought my subwoofer yet but for that I'm probably going to plug it into a smart outlet and have it controlled by app because I understand that crawling under my desk thing
@@JLummin That’s one of the solutions that I was thinking of too. There are also some outlet extensions with a separate foot operated switch that you can get so that’s another route.
Are the vonyx 120 watt studio monitors good if I should buy them? much respect from Romania ✌️
So from the subwoofer to the speaker using TRS cable.. so what cable goes to the computer ? sorry for asking dumb question.. thanks
Is there an easy way how I can control/adjust the amount of bass coming from my subwoofer? I have my subwoofer underneath my computer desk and the bass adjustment is on the back on the subwoofer. It is kinda hard to reach under and adjust it. Can I have an easier solution? Awesome videos
Nope.
are you using an audio interface? if so wont you be able to control the bass on that
Hi, I have the e4.5's. Do you think it's better to add a sub or to buy 2 brand new E5? I miss bass frequencies... Thank you! :)
Rather get a sub I think...
Clean
Thanks!!
different setup different music...come on man
Awesome & Thanks :)
just set up this sub with my eris e5 monitors. I heard of a calibrating method just to set it up and so did you do that or just plug and play?
Can you tell me about JBL, KRK, Yamaha, which one is better?
Will I need an audio interface to connect everything together?
Bro can u give me a light..
My case is, i have 4 studio monitors and 1 sub, which audio interface would u recommend me?
For Presonus Eris E3.5 do I need to have dedicated Presonus subwoofer or can I connect any subwoofer with similar I/O?
So if I was going to connect my multi effects unit to this, instead of an audio interface (my pod go basically is an audio interface) I would just plug the cables into the pod go the same why you plug them into the audio interface?
how does the low-pass filter work? If my speakers reproduce 80 Hz - 22 kHz (M-Audio BX3BT), I set it to 80 Hz? What does this do? Does the subwoofer only send the frequencies higher than 80 Hz to the monitors? Why is there also a High Pass Filter at 80 Hz, does it do the same thing or something else? Also, if the subwoofer has Bluetooth, then the monitors don't need bluetooth, right, since they receive the full signal from the sub? Also, how do you know what frequency your are setting on the LPF, because the tags on the lines are not aligned, and it doesn't seem to be linear??
very helpful
Awesome!! Glad I could help 👌🏼
how does connecting via bluetooth work? do i still need an interface for that?
Hi, I have a JVC Shelves speaker with only AUX port . Can I still use this to plug in a sub woofer?
Does it work like that if you play sound over Bluetooth with a newer version of Presonus monitors?
He’ll no 😂
Hi @@dominickjackson1615 ,sorry I am a layman in this field. Could you explain why that wouldn't work? PreSonus claims that the two products are super compatible...
@@DDimov-nf8mi The sub passes the input into the monitors so there's no Bluetooth connectivity there. Using Bluetooth wouldn't use the sub as it ignores the input cables
does this setup with that particular sub and those particular speakers have to have an amp to work?
Great! Question. How do you setup a temblor with a mackie big knob passive? Interface goes to mackie, mackie goes to monitors right now.
And why do I need the Audio Interface. I can simply connect way RCA to my subwoofer from the pc and then to the monitors right?
Is audio interface required??
Any advice to mitigate ground loop noise with the exact same connection?
Hi! Great vid - i have a Temblor T10 sub, and eris 5 - but i have a really hard time calibrating the sub. If I play pink noise and calibrate with an spl meter, the sub comes out way to loud. Experienced anything similar? Or have any tips?
Thanks ;)
@T Fuller I also didn't like he didn't use the same song but this doesn't make it right for you to be a rude ass.
Isnt there a EQ alredy in the sub? If so I heard you can burn the EQ
Confused, you plugged LEFT & RIGHT TRS from Audio Interface Main Out to two Inputs on the Sub ... however the LEFT and RIGHT output from the sub you plugged into single monitor? So how is the other monitor getting any audio signal?
yeah.... this needs to be clarified. I am 99% sure that was a mistake unless i am profoundly missing something.
@@bgtaylor89 I guess you can set it up this way and use the monitors and Sub to manage the crossover, but in most cases anyone using an audio interface with at least 6 channels would place the sub on a separate channel and manage the out that way ... sooo, I guess if you only have 2 channels of audio out this would be the only choice.
It helped, but ...
Sounddemo
"Just the speaker" (standing on wood) = good
"Speaker with Subwoofer" (All nicely setup with acoustic foam) = fantastic
You're a perfect promoter 😂
Btw, couldn't you afford 4 cables to complete the setup ? 🤔
Can I connect a pair of studio monitors to the other pair by the same method?
Thanks God bless you 😀❤😀👽
Thank you!!! You too!!
Using 4 trs cables can I connect the sub to audio interface and both monitors? Or is it just into a single monitor?
why did you connect left and right into one monitor speaker left and right... does that make it like a mono speaker
I speaker is active and the other is passive.
Is worth it? If I already had the presonus e5 ? I think is too much bass but I'm not sure.
hey man i liked the part where you didnt set anything up in the video and then the part where you compared some sad slow guitar song to a bassy dance track very good video man
lol exactly. he didnt show it all connected. he just put wires into interface then unplugged sub to monitors. literally with all the equipment he had, why not just plug everything and show it from behind. amateur instructional video…