Run Any Prop, Rc Boat Propeller Adapter Quick And Easy - K&S Brass Tube
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Places To Buy Rc Boats & Replacement Parts
Horizon hobby
www.avantlink....
Zipkits
zippkits.com/
Off Shore Electronics
www.offshoreel...
Oxidean Marine
oxideanmarine....
MHZ Power Boats
www.mhz-powerb...
BONZI Sports
www.bonzisport...
SMC Battery's
www.smc-racing...
Mad LIZARD
www.madlizardp...
DEAD AHEAD RC
www.deadaheadr...
Thanks for watching ironclad rc tinker test and tune everything, Personal contact information ironcladedout@gmail.com
“How to keep yourself from getting shafted by your prop”
That’s pretty neat big b. Let me ask your professional opinion. What size prop would you start with on a Spartan with seaking 180esc and leopard 4082 1600kv motor? My smallest prop is a oxidean 45mm 9 pitch. Still too much prop. Where would you start? It’s just making the boy go nuts anything over a little over half throttle lol
Have you tried a 4216 octura or oxidean 42 high rake, maybe a 1616 abc? I've never run that boat, just throwing a few props I'd try if I owned one
If your cheap like me "why not" 😆
many years ago i would use the insulation off various sizes of electric wire and heat shrink and get snug fits... i also heard wrapping teflon tape can work also...i hated any slop at all..
I'll keep that in ming great idea with the insulation
Lol Ghostbusters who u going to call lmao man
I just found this of yours. earlier a video from rc boat bitz he ran a impulse 32 and a sonicwake v2 with a 4716 prop. What's yours thoughts on 4716 on the sonicwake? Thanks
4716 on stock electronics may get hot
@IRONCLAD RC haven't ran my boat in a while but I think my motor is 2000kv I same as ul 19 but I don't remember
I got a couple frankinprops
Hey BIG B... i just got a brand new 14'' cool rc boat... i got a nice deal on it and it said the box was unopened,but of coarse is was messed with...Boat is actually very cool and everything worked great...Heres my issue ...All the grub screw are stripped... this is a common size grub used in many of my boat with no issues... since allen wrench has nothing to grab to how do i get them out??? i want to keep this boat and fix issue the iron clad way...ps thank god the drive dog grub which is the same size is good.. thanks
Try heat if possible and a star headed hex that's basically the same size or you'll need a screw extractor bit
@@IRONCLADRC yes i managed to get motor and drive out and wires are long enough i won't need to disconnect from boat... have plenty of room to work... thanks for the info using a star head along with heat... i will give it a go tomorrow ..would be great to be able to save coupler... its an amazing little boat can't wait to run it... its called the deerc 2104... theres one guy thats throws it off a 40 foot bridge into rapids and has it scoot like a bat otta hell... runs up to 20 plus mins full out using a 3s 2000 included battery... stock setup 23 mph...but its only 14 inches long so it looks like its doing 40... have a great one ..happy boating!
Good, good info !
very helpful BigB! thaaanks brother ✌🏾
Hi big b .....i have 6mm shaft but 6.35 mm propller. I juste put tape..it doesnt fit nicely.
Brass or aluminum tube will work better, tape should work, bench test it first make sure it's balanced if not start over until it's perfectly balanced
@@IRONCLADRC i ve using tape .....if its not balanced does it affect steering ?....i mean the boat at high speed turn right even the rudder is stright with the hull .
@daviddada3499 size propeller will cause what we call "PROP STEER" while the prop is turning it'll veer the boat, best way to reduce prop steer is to get a smaller size prop.
@@IRONCLADRC thanks BigB i appreciate your help.
What is this called where to get it 0:56
Its a 3/16 Drive dog. They also come in 1/8, 4mm, 3/16, 1/4"
Great Info in this video. I'm sure a lot of boater have this question. I was just about to ask you about this exact topic. Im almost finished with the FT011. It's got a 4mm sold shaft I wanted to run a 1716 on it and the prop length doesn't leave bout 1/8-3/16" of thread for bolt. have any idea what I could do with that.
I've shaved the hub part of props to reduce the overall hub length, also try re-cutting the drive dog slit to move drivedog forward? You can also shave off the front of the drive dog to reduce overall length
@@IRONCLADRC Great idea.! Will check to see how much material I have to work with
THANKS FOR THE TIP B
I do know the right prop is the best upgrade for all rtr boats...many new guys don't understand how to select props at all...i destroyed quite a few setups learning the prop basics and testing years ago... I am going to get my old glass boats up and running very soon,since i have not ran boats in over 10 years... Today i came across a very cheap wl916 boat and am very impressed with its performance... I don't have any really small boats but for around $100 shipped i think i will pick this one up...only thing i may want to do is add the best prop possible to increase performance on its 1800 40c pack it comes with... one guy showed it really hauling ass and making great out of hole shots using a 32 mm... but he never said the pitch... i think it has a tiny 22/18 out runner not sure what the kv is though... if you ever checked this one out and have suggestions on what prop will be best without adding much hotter temps i would appreciate it... thanks for all your great info...
Wish l could help with the prop upgrade. I've never run that boat so I'd hate to steer you in the wrong direction
@@IRONCLADRC last night i found a bunch of Graupner carbon and other various props maybe 35 all together which is awesome... i am sure i have a decent prop for any rc boat i have currently and future boats...thanks
Good info brother. K&S tubing is so versatile for different uses.
Give me accisories plss