www.ebay.com/itm/6AN-Female-To-6AN-Male-W-1-8-NPT-Side-Port-For-Gauge-Sensor-BLACK-Coupler-/254063036217?_trksid=p2349624.m46890.l49286, this is the one I used.
www.ebay.com/itm/164061525755, the original one I purchased cost me around $62.00 and is no longer avail. Make sure it is 0-100 psi, 1/8 NPT thread, reads oil, fuel, pressure. Good luck.
100PSI Stainless Fuel Oil MAP AIR Pressure Sensor Sender Connector 1/8" NPT an4. My purchase price at the time was $62.00, there are some cheap ones for $18, right now on Ebay mine is priced at $79.00. Hope this helps
Yes, it needs Map sensor, TPS sensor, Fuel sensor, oil sensor, coolant temp sensor, knock sensor, idle air control, cam and crank sensors. It needs all these for the built in self learn feature and thus creating a fuel map curve. Hope this helps.
That’s impressive , after 3 years . Thank you so much for the information, this definitely has answered my questions
Is the fitting and sensor still working
Yes, no leaks.
I definitely need a Holley soon.
Once you get the Holley, life will be easier.
Where did the get the 6AN adapter? Part number?
Thank you for this video, this is not a very talked about subject.
Ebay!!!! as long as you know your sizes
Will this remove the low error on the fuel pressure , psi on the Holly system ?
Yes, because it will see it.
Right on
Can you please post the link for the fitting ?I have the same an fittings but can not seem to find the adapter for the sensor
www.ebay.com/itm/6AN-Female-To-6AN-Male-W-1-8-NPT-Side-Port-For-Gauge-Sensor-BLACK-Coupler-/254063036217?_trksid=p2349624.m46890.l49286, this is the one I used.
@@MIC-LS thank you ,much appreciated
Also if it's not to much could you share the link for the sensor!
www.ebay.com/itm/164061525755, the original one I purchased cost me around $62.00 and is no longer avail. Make sure it is 0-100 psi, 1/8 NPT thread, reads oil, fuel, pressure. Good luck.
Where did you get the sensor? Do you have information on it?
100PSI Stainless Fuel Oil MAP AIR Pressure Sensor Sender Connector 1/8" NPT an4. My purchase price at the time was $62.00, there are some cheap ones for $18, right now on Ebay mine is priced at $79.00. Hope this helps
Does your Holley terminator need to see fuel pressure in order to run?
Yes, it needs Map sensor, TPS sensor, Fuel sensor, oil sensor, coolant temp sensor, knock sensor, idle air control, cam and crank sensors. It needs all these for the built in self learn feature and thus creating a fuel map curve. Hope this helps.
Did you use the same sensor for your oil pressure?
No I ended up purchasing a corvette oil pressure sensor. Price was $34.00 from Advance Auto parts and the Holley Terminator wiring plugs to it.
@@MIC-LS Thank you for the info.
Did the sensor work or no??? Ordered a harness and just making sure before I go and buy one
Oh!!! Hell yeah it worked. Like a charm. I recomend.