Great video, however you may had access to the sensor underneath the car without removing all those parts. I usually do a hand feel first to see if I really need to remove unnecessary parts.
Excuse me to see if you can help me, I already checked the starter motor and there is no cable that indicates that there is the crankshaft sensor behind, others say that it is above the oil filter and neither
I have a high flow filter so I don't have a conventional filter box, I have easy access to the starter motor but how can I tell you there is no harness that goes behind it
The wire normally tucked in behind the starter. It could be different if the cars not American built. I do know in Mexico that most engines in Dodge are fiat. The sensor will be somewhere on the block
Yea, your video is great but it's needs to be rotated. It's side ways. Another thing is, you must be pretty good or very knowledgeable. I would not remember where all the wire connections go. I would take pictures of everything before I start to unplug anything. I don't rely on memory. Relying on memory got me in trouble in the past.
Ya that I understand. Trying to remember where all the wires go to on my Neon after the engine been out since 2017 make it a bit hard! Like where’s all the grounds go lol. And I did rotate the video but when I upload it from my old IPhone 6 it changed it back for some reason.
Buen video, saludos desde México.
Great video, however you may had access to the sensor underneath the car without removing all those parts. I usually do a hand feel first to see if I really need to remove unnecessary parts.
Excuse me to see if you can help me, I already checked the starter motor and there is no cable that indicates that there is the crankshaft sensor behind, others say that it is above the oil filter and neither
I have already seen everywhere that I have seen and there is no harness that indicates that the crankshaft sensor is there, it is 2.4 automatic, 2001
Normally on the 2.0 it’s above the oil filter. And normally on the 2.4 it’s below the starter normally the starter needs to be removed to get to it.
I have a high flow filter so I don't have a conventional filter box, I have easy access to the starter motor but how can I tell you there is no harness that goes behind it
The wire normally tucked in behind the starter. It could be different if the cars not American built. I do know in Mexico that most engines in Dodge are fiat. The sensor will be somewhere on the block
I thought the 2.4l is located under the motor underneath the motor mount and starter?
Under starter
What year models does this work for? I have 03. 2.7 6cyl
2.4 four cylinder
wanna rotate and reupload it
Eric needs driving lessons apparently...😑
Yea, your video is great but it's needs to be rotated. It's side ways.
Another thing is, you must be pretty good or very knowledgeable.
I would not remember where all the wire connections go. I would take pictures of everything before I start to unplug anything.
I don't rely on memory.
Relying on memory got me in trouble in the past.
Ya that I understand. Trying to remember where all the wires go to on my Neon after the engine been out since 2017 make it a bit hard! Like where’s all the grounds go lol. And I did rotate the video but when I upload it from my old IPhone 6 it changed it back for some reason.