Bostitch Air Compressor Tutorial
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- This video describes in detail how to use the Bostitch 6 gallon air compressor. It tells you the different features of the compressor and how to properly drain the tank after each use.
Buy this compressor with the other nail guns in my other videos at: (paid link)
amzn.to/42zerjh
Disclaimer: The following DIY video is for information purposes only. The contest is intended to demonstrate how to perform a specific task or project, and should not be considered professional advice. Viewers should exercise caution and take appropriate safety measures when attempting any of the techniques or procedures shown in the video. The creator of this video is not responsible for any damage, injury, or loss that may result from the use or misuse of the information provided. Always consult with a qualified professional before attempting any home improvement or repair projects.
Really helpful! My dad is sick and my mom forgot to show me how to use it before going to work. Was able to bring my brother out for lunch at a good time and made it to work
Glad the video helped you out! Thanks for watching, have a great holiday weekend!
Welp, just bought this and had no idea how to work this thing! Your video helped me a lot, thanks for the great video!
You're welcome! Glad the video helped you out. Thanks for watching. Happy New Year!
Thank you man! My drain plug was stuck open, and you saved me at least 2 hours of frustration
Glad the video helped you out! Thanks for watching and for the comment. Have a great night!
Thx . I use one for tires but I appreciate the video as I need to see what it can do.
You're welcome! Glad the video helped you out! Thanks for watching, have a great night!
Thanks man really helped me out today!
You're welcome! Glad the video helped. Thanks for watching, have a great weekend!
Thank you so much this video really help me
You're welcome! Glad the video helped!! If you'd like to check out my other tool and diy videos be sure to subscribe and check them out! Thanks for watching, have a good day!
Helpful AF
Glad the video helped! Thanks for watching and for the comment. Have a great weekend!
Nice video. Thank you
Thank you! And thanks for watching, have a great day!
I have this same one. Can you pin a comment with what the psi should be for the air pressure trigger, staple, brad nailer and finish nailer?
Different manufacturers have different recommendations for the psi the tool should be used at. What do you have?
Comment below if you are thinking of buying one of these or if you have one let me know what you think of it. Please consider subscribing if you haven't already to show your support and help my channel grow. Thanks for watching!
I recently bought this compressor n never owned a compressor n had a few question hopefully someone could answer. I see there 2 pressure gauges. The one that is for how much pressure is going into the hose, how much pressure should I usually run that at like for example if I’m just using it to pump air into some tires?. Also if I plug it in n turn it on n it builds up air pressure inside the tank can I just store it away with that air pressure inside of it or do I have to let the air pressure out before I put it away n if so how do I do this?.
Thanks for watching and for reaching out! Typically all air tools will give you a recommend psi range to run the tool at. An example would be a bostitch 18 gauge nail gun should be operated anywhere from 70-120 psi. Filling up a tire I'd just set the dial somewhere in the middle and you should be fine. When you are done with the compressor for the day always empty out the tank. You can do this by pulling out the pin and hold it out underneath the dial that shows the compressor psi or you can unscrew the bolt underneath the compressor which will also release air in the tank. Thanks for watching! Be sure to subscribe and check out my other tool and diy videos if you haven't already! Have a great day!
@@fixanythingsavemoney thanks a lot. Also do I have to let the air compressor get all the way full before I can use it?.
You don't necessarily have to but it does shut off automatically once full. When you're using it and it detects the tank is getting low it will kick back on to fill the tank but no you do not need to wait although I usually do since it doesn't take too long to fill.
Can anyone tell me why mine is shooting blanks? The gun doesn’t feed itself nails. I also just found out that leaving air in it is bad lol so I’m sure I’ve left air in there before
If you the psi set to the correct parameters for the nail gun then you shouldn't have an issue other than your nailer may be bad.
@@fixanythingsavemoney I’ll check that out thanks a lot for the comment
@jonathanroberts9043 no problem!
is this high quality and durable?
I haven't had any issues at all with mine so I was say it is very durable and the quality does seem to be there. Thanks for watching and good luck it if you decide to buy. Have a good day!
Should the drain plug be open when using it?
No, if the drain plug is open it won't allow it to fill up correctly and maintain any sort of pressure. Hopefully that helps! Thanks for watching and for the comment. Have a great night!