Maybe, but who knows. The manufacturer claims that the controller board should work on variety of motors, but it doesn't say if it can power such with Hall sensor. I thing the windings of the motor should be the same, the only difference is the Hall sensor that tells the control board the position of the rotor... I'm still not that good in this subject
Hello. I loved this video of yours. It's a beautiful job. Now that it's been a long time, can you tell me if it's still working? I have a similar machine and would like to do the same, is there any other solution? A hug and many congratulations.
The BLDC controllers usually don’t like to to be suddenly disconnected from the battery. This is because the braking is done with charging the battery. If you disconnect it might try to brake, since the is no battery the current cant go anywhere so the only option is to raise the voltage. And with a heavy cutting disk this might be enough to get the voltage high enough to kill it.
Unfortunatelly i don't have the stock angle grinder to test. I will be doing some test with my version of the grinder, but not sure when. The weather is problem - its cold outside currently. If i do some extensive testings home I will drive my neighbours crazy :D
@@ickui need to know about the fixed grinder you done if the new controller cuts of low voltage of the battery because battery doesn't have low volt cut off
Good job I buyed for 90 euros 4 Einhell tools ., One screw driver , axxio flex , nail stapler, and somthing for cutting ., 18 v tools ., I'm waiting for delivery . On what spead level you left potenciometar ?
Hi, where did you order the brushless motor control board without the hall sensor? I want to put it on a milwaukee thread, that's why I need the reverse and speed control. Thanks
Не толкова добре колкото очаквах. Платката има някаква защита от претоварване(изключва), но ако човек се постарае може да я изгори - казвам го от опит хаха
Eто, макар малко да са му променили радиатора, а и доста са вдигнали цената гледам :( www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Много интересно видео.Контролера е 17 долара-малко е скъп обаче видях само моторчето за 3 долара и половина ,което си е доста евтино.Регулатора на оборотите би бил доста полезен във ъглошлайфа ако успееш някак да го вградиш.Поздрави за труда
Нямам представа какъв товар може да поеме Парксайдският контролер, но определено е доста по-малко от този с 1000-та си вата. Предполагам е някъде към 500W, може и по-малко. Повечетo контролери за такъв тип машини са точно толкова - 500W. Такива имаше супер евтини в Алито, но бяха с неудобни за вграждане размери. За това се спрях на този, а той като по-мощен е респективно и по-скъп.
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
i just ordered a new angle grinder and i might do this upgrade from new if its better then stock
Where did you buy the controller?
Here you go Ercan: www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Thank you very much, perfect job
Много добра работа браво, хубав канал си направил
Will this controller work with hall controlled motor? Hall version motor is in the previous version of this angle grinder.
Maybe, but who knows. The manufacturer claims that the controller board should work on variety of motors, but it doesn't say if it can power such with Hall sensor. I thing the windings of the motor should be the same, the only difference is the Hall sensor that tells the control board the position of the rotor... I'm still not that good in this subject
Hi! Great video. I would like to ask from you the model nr. of Parkside battery operated heat shrink tool. Can you help me?
mạch điều khiển Động cơ 👍👍👏
We are waiting for the test. Is the power of the device the same as on the factory controller? Does the device work without problems after 2 months?
Hello. I loved this video of yours. It's a beautiful job. Now that it's been a long time, can you tell me if it's still working? I have a similar machine and would like to do the same, is there any other solution? A hug and many congratulations.
Nope, I've managed to burn it again 😂 It seems the new board protection is worse than the original.
The BLDC controllers usually don’t like to to be suddenly disconnected from the battery. This is because the braking is done with charging the battery. If you disconnect it might try to brake, since the is no battery the current cant go anywhere so the only option is to raise the voltage. And with a heavy cutting disk this might be enough to get the voltage high enough to kill it.
With a lot of BLDC controllers its standard to brake when there is no power.
Men, I have burned 2 controllers after days of use, any solution?
have you made the video with it working\cutting?
im curious how well it will work compared with stock controller
Unfortunatelly i don't have the stock angle grinder to test. I will be doing some test with my version of the grinder, but not sure when. The weather is problem - its cold outside currently. If i do some extensive testings home I will drive my neighbours crazy :D
@@ickui need to know about the fixed grinder you done if the new controller cuts of low voltage of the battery because battery doesn't have low volt cut off
@@marbesky I don't think the board has such function as by description its rated to work at wide voltage range - DC12-24V
Hello!
Ist es auch mit einer Sensormaschine kompatibel?
Good job I buyed for 90 euros 4 Einhell tools ., One screw driver , axxio flex , nail stapler, and somthing for cutting ., 18 v tools ., I'm waiting for delivery . On what spead level you left potenciometar ?
At maximum. At lower levels the board can burn unfortunatelly :(
Thanks! Well done. My compliments!
any link for a controller board? Tnx
Hi, do you have a test under stress? After a few months of use it still works?
magnifique très bon travail ,
Super przydatny film👍
Great job 👍👍
Thank you! Cheers!
Nice job, well done. Could you, please, share a link to the new circuit board? Thanks!
Sure mate! Here you go: www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Hi, where did you order the brushless motor control board without the hall sensor? I want to put it on a milwaukee thread, that's why I need the reverse and speed control. Thanks
www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Unfortunately its out of stock.
Hello. Please tell me the website where you bought this controller from your video. I would like to get one too. Thank you in advance.
www.aliexpress.com/item/4000299173443.html?spm=a2g0o.order_list.order_list_main.48.71801802oUOW7i
The've changed the design of the board a little bit.
Webside control motor board please
Too much grease?
can you specify where to buy such a controller for motor control?
Aliexpress. But its not available currently: www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
hello can you give more information about where the board was purchased. thanks in advance
th-cam.com/users/redirect?event=comments&redir_token=QUFFLUhqbUtJbTMxSjF2R2ZzZzMxN0ZqNmlGVU16dXd3UXxBQ3Jtc0tranB2OGdqRk1sSGlTM0k2Si13d1g1N3RjNU5nZllTMndjWVpVcGZPUUhpYzgzS0hqLWx2N1MweDdVN3JuVkttb1J6UmYwVnYwNHAwVmRXNnFKa3M1VTdSYkliQzJLUTRKVzc1WDR6TkYtSERxX0QtUQ&q=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F4000299173443.html%3Fspm%3Da2g0s.9042311.0.0.58344c4dRN3PSl&stzid=UgwipMVDl9cPJ61Q9VV4AaABAg.9IDUrks5uNe9IDY3vGZ1uB
Nice
Can you work with it and show it in video?
Sure, will do some testing and post the video here.
No low voltage protection !
Nice!
Здравей, успя ли да го пробваш дали работи нормално?
Здравейте, много добро видео. Имате ли вече преки наблюдения как се държи машината?
Не толкова добре колкото очаквах. Платката има някаква защита от претоварване(изключва), но ако човек се постарае може да я изгори - казвам го от опит хаха
@@icku Благодаря за отговора. Как става тази работа със защитата?
@@ПетърКаракинов Има я вградена в платката. Ноо...нещо не са я доизпипали и 4-5 пъти като я задействах на 6 -тия все пак изгоря
Здравей, дали може да дадеш линк за управлението на мотора ? :)
Много добро видео.
Eто, макар малко да са му променили радиатора, а и доста са вдигнали цената гледам :( www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Много интересно видео.Контролера е 17 долара-малко е скъп обаче видях само моторчето за 3 долара и половина ,което си е доста евтино.Регулатора на оборотите би бил доста полезен във ъглошлайфа ако успееш някак да го вградиш.Поздрави за труда
Нямам представа какъв товар може да поеме Парксайдският контролер, но определено е доста по-малко от този с 1000-та си вата. Предполагам е някъде към 500W, може и по-малко. Повечетo контролери за такъв тип машини са точно толкова - 500W. Такива имаше супер евтини в Алито, но бяха с неудобни за вграждане размери. За това се спрях на този, а той като по-мощен е респективно и по-скъп.
😮
Може ли линк за контролера или модела.
www.aliexpress.com/item/4000299173443.html?spm=a2g0s.9042311.0.0.58344c4dRN3PSl
Благодаря
ZA DUŻO SMARU!!!!
!!!