I know I've written this before, but I have to say it again, your work is simply fantastic, I never tire of watching it and trying to learn. Thank you very much for sharing. I would like to ask you if this machine loses any strength or characteristics after this change? I have the same one, when I try to turn it on, the engine signals but it doesn't turn, is it the module or is it something else? If I can respond, I will. I thank. I wish you much success for your extraordinary work. Greetings from Portugal, thank you
Thank you my Friend🙏🙂🤝 This is a video that consists of 2 parts, the first part was filmed about 5-6 months ago and I just finished the second part now🤦. I always thought it would be time for the second part as well. 🤔😌🙂😊
Amazing repair. For this, you have to have very high set of skills. It is easier for the common man to take advantage of the 5 year warranty of performance series
Hi friend, I like your channel. I want to learn more about you. Could you tell me the name of the tool you use at minute 3:54? Please, thank you. And what is it for?
In the angle grinder was undervoltage protection (yellow wire in battery terminal)how do you solve that?I dont find any word in the product description.If is not present,grinder will suck the battery dry so destroy it 🤔
Is it possible to place new transistors on the pads next to them that are not populated because my original pads are torn because the transistors were melted?
Dear friend, sorry for the boldness of this message, but I saw your video, and as I have the same problem on my parkside, it's the same model as yours, I decided to buy the module and exchange it. Now the machine is responding but has started to emit smoke in the engine area. I'm not very experienced so I decided to ask for your help if you want to help. I thank you in advance for the teachings you always share. Compliments
Can you share the symbols from the three chips from the controll board please? My PWSAP 20-Li D4 got bricked after firmware update... and im wondering if there is a external memory chip so in can extract good firmware and flash it to my dead tool.
Hello. You can try multiple batteries and eventually it will flash the firmware. Try again and again, borrow other smart batteries till it's done.have patience and eventually it will be flashed. Just use as many other smart batteries you can find.
Parkside tools, brushless and normal, have a problem. If the motor get stuck - be it a saw, a grinder or else, the motor collector - for brush tools - or the driver circuit - for brushless tools - get burned after only two seconds. I use a Parkside drill (with brush motor) and I keep the clutch always engaged, so if the drill bit gets stuck in the hole, the motor can still spin, saving the drill from a premature end. As with 12 Volt tools the battery contain a complete BMS with cell balancing, I believe it is possible to decrease the over current threshold, cutting the voltage when the current drain become excessive. Greetings, Anthony
Why did you bother opening the old controller if you were going to replace it with another one? Also, couldn't the blown MOSFETs have been replaced to fix the board? Was the controller IC also blown?
I thought it would work after replacing the transistors, but after removing them and measuring, I found out that the gate driver was also burnt, which could not be found🤷
Hey. How can I remove the two wires between the plus and minus that connects to the battery in order to make it work with another battery???? S and id I think! Just want the remaining plus and minus and exclude the other 2
Hello.milwaukee repaired? Were to find controler for m18 brushless ?can I replace controller with another one?i can't not find original (just complete and cost to much)that controller is good for all type brushless motors?where to find it?
Are you asking about the whole controller assembly or about transistors? Transistors cannot be properly replaced, because it got hot so much it fused with copper.
@@ErCanEverything, @MrFrambooise ok, but in such drivers only the transistors are damaged (together with the PCB) and the rest of the integrated circuits are functional?
@tomaszw5156 In this case, I waited 5-6 months for a donor PCB, which I first installed a driver and it came out with more burnt channels than the first one, which is not in the video.
@@tomaszw5156 most likely yes, but since alot of copper is missing the conductivity will not be sufficient enough, and increased resistance means more heat.
Muito bom o teu trabalho parabéns eu tenho uma rebarbadeira dessas que creio que é essa placa que está com defeito,gostaria de saber a onde comprá-la podes me ajudar. Se puderes agradeço .👏👏👏👏
Hi, Great video. I've got the exact same problem with mine, the only difference is that mine si the flat head one with no physical button on it. Would you be able to help finding the right controller for that model? I've been looking online for ages and I can't find anything about it. Thank you!
ah man this was a torture but after i 3 times smoked the motor just cuz the middle line was on false position :'D thanks #ErCanEverything for this 100% helpful video :D best tutorial !
Неплохо, но я все свои китайские разбирал и усиливал дорожки, так же менял на большее сечение от колодки к плате. Итог всего, стало сложнее увести в защиту инструмент.
Can you make video with model pwsap 20 LI E6?this model has control panel with touch. I bought a control board with connector but i think the wire configuration is diferent than the original controller. If i connect a button from a screwdriver, it works perfectly. Can You please help
does someone knows why these parkside grinders sounds so horrible like they already broken ? if you compare it with bosch or milwaukee, you dont have this scratching resistance sound with is shown in the first minute
Great saving Brother!
One more power tool brought back with ease thanks to professional workmanship 👏
Great fix once again... can you please make a same fix video about PDSSAP 20-Li B2 impact driver? Thanks for spreading your electronics expertise...
Very good explanation and text/video edit on what's going on. Entertainment AND Education at the same time 😀. Much respect Brate!!!
Thank you my Friend😊🤝
Blagodarya🙂
I know I've written this before, but I have to say it again, your work is simply fantastic, I never tire of watching it and trying to learn. Thank you very much for sharing. I would like to ask you if this machine loses any strength or characteristics after this change? I have the same one, when I try to turn it on, the engine signals but it doesn't turn, is it the module or is it something else? If I can respond, I will. I thank. I wish you much success for your extraordinary work. Greetings from Portugal, thank you
I've watched the video from start to the finish. Very good job 👍👍👍
Thank you my Friend🙏🙂🤝
This is a video that consists of 2 parts, the first part was filmed about 5-6 months ago and I just finished the second part now🤦.
I always thought it would be time for the second part as well. 🤔😌🙂😊
Amazing repair. For this, you have to have very high set of skills. It is easier for the common man to take advantage of the 5 year warranty of performance series
Hi friend, I like your channel. I want to learn more about you. Could you tell me the name of the tool you use at minute 3:54? Please, thank you. And what is it for?
Very nice and very happy ❤❤❤
Thank you my Friend🙏🙂🤝
@@ErCanEverything thanks 👍
my D4 died after 3rd usage. I used jus about 1mm of cutting disc. Then magic smoke on 2nd speed.
In the angle grinder was undervoltage protection (yellow wire in battery terminal)how do you solve that?I dont find any word in the product description.If is not present,grinder will suck the battery dry so destroy it 🤔
I got similar controller in my chinese brushless drill and it stops working at around 15V. Not sure if all of them have that though.
معه ان فيديو طويل إلا اني لم اشعر بلوقت ونا اشاهد .
Is it possible to place new transistors on the pads next to them that are not populated because my original pads are torn because the transistors were melted?
Dear friend, sorry for the boldness of this message, but I saw your video, and as I have the same problem on my parkside, it's the same model as yours, I decided to buy the module and exchange it. Now the machine is responding but has started to emit smoke in the engine area. I'm not very experienced so I decided to ask for your help if you want to help. I thank you in advance for the teachings you always share. Compliments
Can you share the symbols from the three chips from the controll board please? My PWSAP 20-Li D4 got bricked after firmware update... and im wondering if there is a external memory chip so in can extract good firmware and flash it to my dead tool.
Hello. You can try multiple batteries and eventually it will flash the firmware. Try again and again, borrow other smart batteries till it's done.have patience and eventually it will be flashed. Just use as many other smart batteries you can find.
Parkside tools, brushless and normal, have a problem.
If the motor get stuck - be it a saw, a grinder or else, the motor collector - for brush tools - or the driver circuit - for brushless tools - get burned after only two seconds.
I use a Parkside drill (with brush motor) and I keep the clutch always engaged, so if the drill bit gets stuck in the hole, the motor can still spin, saving the drill from a premature end.
As with 12 Volt tools the battery contain a complete BMS with cell balancing, I believe it is possible to decrease the over current threshold, cutting the voltage when the current drain become excessive.
Greetings,
Anthony
What about the LED lights for switching the speed from 1 to 6? Is there a way to reconnect it to the new board.
Why did you bother opening the old controller if you were going to replace it with another one? Also, couldn't the blown MOSFETs have been replaced to fix the board? Was the controller IC also blown?
I thought it would work after replacing the transistors, but after removing them and measuring, I found out that the gate driver was also burnt, which could not be found🤷
Very good 👏
Isn't the grinder weaker with the new controller?
As I feel the difference is not more than 10% or even no difference in power🤔
Какой блок отвечает за ATF в инструменте ? Можно ли его установить на инструмент если его не было раньше ?
This controller is compatibile with Cordlles jogsaw parkside psspa 20?
This controller works with all 18V - 20V tools which also has 14 - 15V low voltage protection!
Salut j ai fais la même chose ça va super bien 👍 merci pour l investigation pour la détection de de composant défectueux sur la carte d origine .
Hello, can it work without a board, to connect the stator directly to the battery, thank you
No because its brushless, only brushed motors can be directly wired.
Hey. How can I remove the two wires between the plus and minus that connects to the battery in order to make it work with another battery???? S and id I think! Just want the remaining plus and minus and exclude the other 2
Hello.milwaukee repaired? Were to find controler for m18 brushless ?can I replace controller with another one?i can't not find original (just complete and cost to much)that controller is good for all type brushless motors?where to find it?
Whay gate driver cannot be replacement? It's not availlabe anywhere?
Are you asking about the whole controller assembly or about transistors? Transistors cannot be properly replaced, because it got hot so much it fused with copper.
I don't think It's available anywhere and I even transferred from another non-working one. But it also came out burnt🤦🤦🤦
@@ErCanEverything, @MrFrambooise
ok, but in such drivers only the transistors are damaged (together with the PCB) and the rest of the integrated circuits are functional?
@tomaszw5156 In this case, I waited 5-6 months for a donor PCB, which I first installed a driver and it came out with more burnt channels than the first one, which is not in the video.
@@tomaszw5156 most likely yes, but since alot of copper is missing the conductivity will not be sufficient enough, and increased resistance means more heat.
El comentario no lleva ninguna carga semántica, sirve de apoyo al canal y agradecimiento al Autor.👍👍👍
Muito bom o teu trabalho parabéns eu tenho uma rebarbadeira dessas que creio que é essa placa que está com defeito,gostaria de saber a onde comprá-la podes me ajudar.
Se puderes agradeço .👏👏👏👏
A eu ia me esquecendo .moro em Portugal ok🇵🇹
Hi,
Great video. I've got the exact same problem with mine, the only difference is that mine si the flat head one with no physical button on it. Would you be able to help finding the right controller for that model? I've been looking online for ages and I can't find anything about it.
Thank you!
you got almost a new tool, send it for warranty.
روعة ولكن من اين جاءت هذا الكارت
Its a great fixing video, but hey parkside / lidl has a 3 year warranty, and i dont think this angle was older than that period :P
Yes, however, this angle grinder is from a flea market and had no warranty😁🙂
5ys for performance.
ah man this was a torture but after i 3 times smoked the motor just cuz the middle line was on false position :'D
thanks #ErCanEverything for this 100% helpful video :D best tutorial !
удоволствие е да те гледам как работиш
Благодаря ти Приятелю🙏🙂🤝
Excellent❤
Неплохо, но я все свои китайские разбирал и усиливал дорожки, так же менял на большее сечение от колодки к плате. Итог всего, стало сложнее увести в защиту инструмент.
Can you make video with model pwsap 20 LI E6?this model has control panel with touch. I bought a control board with connector but i think the wire configuration is diferent than the original controller. If i connect a button from a screwdriver, it works perfectly. Can You please help
Awesome
منم تعمیرات انجام میدم وعاشق این کارام❤
ما هو بديل موسفت lgt30n13
does someone knows why these parkside grinders sounds so horrible like they already broken ? if you compare it with bosch or milwaukee, you dont have this scratching resistance sound with is shown in the first minute
👏👏
you say! stop brushless tools!
only 1% people can repair them.
🤔🤔🤔🤷
❤❤❤❤
👏👏👏👏🔥🔥🔥🔥
Better get a dewalt or milwaukee or flex grinder, more power
You can overvolt the Parkside grinder with 24v and it will destroy what u mentioned
Wow so there's more with same problem I used mine once and it failed when the metal gripped the disc 😂
You are Gina's engineer
You made Faster video please
Esc rc controller ....
And this is an RC controller but look what it does😉
th-cam.com/users/shorts4RbN08hu0RM
А где здесь восстановление? Поставить новый модуль любой сможет 😊
C'est de la merde parkside 😂😂😂
You made slow video I don't like slow video
Because you play Subway surfers😉
What
I make slow videos, you don't like it because you play a fast Subway surfers game🙂
What I don't play Subway surfers
Set playback speed on settings to x2 then 👍