**UPDATED**Changing Line in AEG 58V Line Trimmer/Edge/Whipper Snipper
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- AEG have updated the 58V line trimmer.
My original unit had a motor burnout and was replaced by the current model under warranty.
The process to change the line is identical, just looks a different.
Ex- public servant here. Thank you for sharing this. I have pushed paper so long I have forgotten how to be useful.
I have to add to the multitude of people thanking you. If not for your video, I would have been stuck trying to decipher the cryptic and poorly printed images in the "manual" that was included with my whipper snipper. Thanks once again, you're a life saver!
True lol. I looked at the manual today. Shocking. Just a few pics showing little and telling nothing.
The only video that made it simple. Thank you.
Your straight to the point video has enabled me the achieve something I gave up on 12 months ago and then resorting to trimming edges with my hands. But this time I was determined to work it out and yours is the second video that has showed me how to do it as they must be all different and I needed to find an AEG cordless snipper instruction video. The only extra thing that was fully needed to complete the task once started was elbow grease and strong fingers and thumb. Thanks again ;)
You can also take the centre off and feed it through the spindle tunnel if you keep feeding it into the abyss and it doesn’t show up on the other side. Place the wire in the metal groves, push cap back down and then wind up.
This is the the one^
You're a lifesaver and a time saver. Awesome easy to follow video, unlike the useless manual. Thankyou thankyou thankyou!!
Yes! Isn’t the manual useless! This video is great. Told me all I needed to know, quickly and simply.
Brilliant demonstration. Thank you!
Legend!! Less than 2 min video. Perfect for my attention span!
A picture worth a thousand words. Couldn't understand the manual, all pictures no words. I guess ur video worth a thousand pictures. I watched it. Did it in minutes.
Thanks for the update. I eventually found the rewind is much easier when you push down on the centre knob.
Yes, thanks, that's actually an essential part of the instructions that is missing from this video. I got frustrated finding that it didn't go through but it went straight through when I pushed that down.
Legend. Thanks mate. Aimlessly waking around Bunnings looking for help and came across your video. Life saver 👍
OP if you're seeing this you can add a tag for the 18V AEG trimmer as well. The head in mine looks the same.
You made my life easy... I caulked so many times trying to feed the line in....now it just make sense!
Great Video , Short Sweet and covers everything . Love ya work bro thx
Thank you so much for this simple & easy to follow video. I had wasted lots of time trying to manually wrap the cable around the spool. This was a breeze! 😄
Me too! I’d just finished saying to my son, These things are stupid! They need to figure out an easier way. (Because the manual was useless and I was trying to wind it on manually 😂 - which I’ve five before and remember what a pain it was!) Watched this vid and did it in about 1-2 minutes! So easy! No need for a redesign after all 😂😂
Thanks mate. This helped a lot. I agree with the comments regarding the manual having only pictures which are not clear enough.
This is SO helpful - was doing it completely wrong! Thanks so much for posting
Mate!!!! You just made my life so much easier
Onya man. The AEG manual with pictures only was very vague.
Thank you wouldloveapizza. I can now do what I could not! So much appreciated 🤗
thanks mate this had me stumped
Good man. May all traffic lights turn green for you when you drive. 👍
Great instruction video. Thank you, I'll stop scratching my head now and get to work 😂
Thanks mate! You just saved me a whole heap of messing around. Have a good one!
Amazing! Thank you
Thank you for the demo 👍
Thankyou, saved me scratching my head
Great video. Saved me a heap of time
Thank you saved me half an hour easy. Lol
Wish I had watched this previous to spending an hour screaming at the bloody thing figuring out how to do it lol
Well done mate! Spot on
Well that explains why i couldn't unscrew the circle thing.
Thank you!!! Very clear simple instructions
Legend needed this💪💪
Legend, thank you!
Thank you.
I love you...thank you very much!!
Thank you!
Thank you 🙏
What to do when the line simply does not come out of the other side?
Very helpful. Thanks
Thank you
You helped so much!
Thanks bro
What size and direction thread is used to mount the head on the AEG?
Head on mine is knackered and looking at cheaper options as genuine head is around $50.
Thanks
I actually love you
fantastic video, do you know if this is the same system on the 18V AEG ?
Sorry not sure but would be surprised if they weren't.
is the line replacement process the same for the 18v model?
Haven't tried but would be surprised if not.
Yes it is. I just used this video for an 18v
G'day mate. Would you recommend this trimmer?
See my other video on the unit. Depends on what you need do to but I would go 18v.
@@wouldloveapizza Hi, can I ask why you would go to the 18v model? I just received an 18v as a pressie.
@@chrisjones5572 lighter for better handling. Bought the aeg with the intention of getting their mower, but have purchased the makita 18v x 2 mower now.
@@wouldloveapizza oic, I’ve got an average size block and we done the whole lot with a 2ah battery. Used to 2 instead of 6 due to weight.
@@chrisjones5572 It is lighter but the 58v model has a 43cm cutting circle while the 18v has a 33cm cutting circle. I've had my 58v line trimmer for four years now & love it (although I have at times thought about including the 18v version for more awkward situations). I added the 58v Brush Cutter (with bike handle) model instead.
Yep, good video. The “manual” is crap. But to squeeze the retaining clips in while simultaneously pulling the spool cap off you need either hands like a gorilla or two people. Preferably one of those people should not be your wife! My nose will heal up on its own but it’ll be bent for life.
Well that explains why i couldn't unscrew the circle thing.