You need to use the eeprom from the defective board and install to the new main board. you can check from my video th-cam.com/video/-1SkwfLMAcY/w-d-xo.html . Good luck.
@@macor285 I see, Thank you sir... my Km2050 user's interface freezes 10 to 20 seconds from powering on. And when I do a restart it will just stuck at "Kyocera" logo. what could be the problem sir? thanks
@@macor285 no sir, haven't change any of its main parts yet.. I cant run the U026 because the UI hangs as soon after it warms up, cant do nothing on the controls all keys are not responding..
Sir, I on my kyocera 2550ci. All was ok.Left it booting for some time,but when I came back,the display was blank.That is,off. I off the machine,booting normally but still,the display doesn’t come up.What could be the problem? Thank you
I use kyocera copiers, many of them have main board problems. Many don't bring light and others will display different codes. One will display (km 53000). I check the code, the copy lamp blown. But copy lamp is OK. My machine models are km2530, km3035. Can the board be repaired or only replacement. Thanks.
You can swap the other main board from other machine just for testing. Dont forget to swap also the eeprom. I haven't try to repair the board, only replacement.
Sir, I posted severally but no response.Does this applies to 2550Ci as well? When I on it,the engine boots properly but no display. Thank you very much
Bonsoir mes espère j'ai un soucis que je demande vous soumettre j'ai deux machine kioxera km2550 qui donne le code c0130 j'ai tous faire pour résoudre résoudre mais je n'es pas pus.
SOS/HELP!!!!!! Hello!!!! Very happy to join your channel.I have KYOCERA 2550ci Task Alfa.I have changed the main board/printer board where you have the fan attached.Sine then,I have an error code C0180 appearing immediately I turn it on.Telling to contact the service. What could be the problem & how can it be solve? Thank you
When use compatible drum in Kyocera 1800 Black background apears
sir what if the problem is jsut the main board.. if I order one online do I also need to order the engine board? coz it may also give me a c0180 error
You need to use the eeprom from the defective board and install to the new main board. you can check from my video th-cam.com/video/-1SkwfLMAcY/w-d-xo.html . Good luck.
@@macor285 I see, Thank you sir... my Km2050 user's interface freezes 10 to 20 seconds from powering on. And when I do a restart it will just stuck at "Kyocera" logo. what could be the problem sir? thanks
@@mesgraphix2096 Did you replace the mainboard? Kindly check/read from the service manual the U026 and U027...
@@macor285 no sir, haven't change any of its main parts yet.. I cant run the U026 because the UI hangs as soon after it warms up, cant do nothing on the controls all keys are not responding..
@@mesgraphix2096 it is a mainboard problem...
Sir, I on my kyocera 2550ci. All was ok.Left it booting for some time,but when I came back,the display was blank.That is,off. I off the machine,booting normally but still,the display doesn’t come up.What could be the problem? Thank you
I use kyocera copiers, many of them have main board problems. Many don't bring light and others will display different codes. One will display (km 53000). I check the code, the copy lamp blown. But copy lamp is OK. My machine models are km2530, km3035. Can the board be repaired or only replacement. Thanks.
You can swap the other main board from other machine just for testing. Dont forget to swap also the eeprom. I haven't try to repair the board, only replacement.
my km1650 is same problem .is it main bord problem?
Yes...
Try to remove the mainboard and clean the memory, etc.
Sir, I posted severally but no response.Does this applies to 2550Ci as well? When I on it,the engine boots properly but no display. Thank you very much
No, Its different. I am not familiar with 2550Ci.
@@macor285 sir,can I send a picture to you ? You helped me on the power board earlier. Thank you
No problem...
@@macor285 sir,how do I attach a picture to you?
It’s a Kyocera TaskAlfa 2550Ci
Bonsoir mes espère j'ai un soucis que je demande vous soumettre j'ai deux machine kioxera km2550 qui donne le code c0130 j'ai tous faire pour résoudre résoudre mais je n'es pas pus.
Did you change the mainboard?
Dear sir
Kyocera 2550 machine error c3500
How to solve
I will check tomorrow...
i don't know motherboard problem but thanks big brother
Welcome...
Kyocera 1800 gear how to replace
kindly check from this video th-cam.com/video/KixK19Yu8fU/w-d-xo.html
Sir,can please show us clearly where the eeprom is?
Thank you
Check it at 7:10 under the fan.
It is an 8 pins IC.
@@macor285 Very helpful.Thank u sir
SOS/HELP!!!!!!
Hello!!!!
Very happy to join your channel.I have KYOCERA 2550ci Task Alfa.I have changed the main board/printer board where you have the fan attached.Sine then,I have an error code C0180 appearing immediately I turn it on.Telling to contact the service.
What could be the problem & how can it be solve?
Thank you
kindly watch the video th-cam.com/video/0UyvpnzC5WA/w-d-xo.html
no change motherboard help me videos
Sorry I don't have video for that model. Just search from google you can find solutions from forum.
Kyocera 1800 c7100 error solution pleace
It is a mainboard/engine board problem...
help me
for video
Aider moi à résoudre Ce code c0130
th-cam.com/video/0UyvpnzC5WA/w-d-xo.html
kyocera taskalfa 1800 call service c0180 error problem hardwear solution
Did you replaced the mainboard?
problem solved
Congrats...
а по русски можно?
Sir aapka mobile number