Xiaomi Redmi Note 4 MediaTek LCD Replacement
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2018
- A Screen Replacement on a Xiaomi Redmi Note 4 MediaTek Version =-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Tools that i use frequently that are Ali-express Affiliate linked
CPB Heat pad: s.click.aliexpress.com/e/68nLSbQ
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.
Heat Resistant Tape: s.click.aliexpress.com/e/dQ283f6
When using the heat gun near sensitive parts, its best to cover them
With this to protect them
Double Sided Black Tape: s.click.aliexpress.com/e/bO46kXwg
The usual tape i use on most repairs, on screens
Red Clear Tape: s.click.aliexpress.com/e/cK4DNmIU
For things that need more Stick!,usually on tablet digitizers
Phone Repair Tool Kit: s.click.aliexpress.com/e/bH1lqUe4
A Similar tool kit to mine, that i use for those random screws that you dont normally see
Hakko FX 951 Clone Station: s.click.aliexpress.com/e/b5YamiMs
My Soldering Station i use, so far it has been good
Quick 861DW Hot Air Station: s.click.aliexpress.com/e/bAdNJvNI
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase
Power Z USB Amp Tester: s.click.aliexpress.com/e/TlwI4w8
Advanced readouts of power draw on devices
Basic USB Amp Tester: s.click.aliexpress.com/e/cUjjwpDW
A Simple Amp tester to see if your charger is actually putting out power
Black Tweezers Set: s.click.aliexpress.com/e/I80EZbE
The Black Tweezers i use in my videos
Metal Pry Tool :s.click.aliexpress.com/e/ckqD1TNQ
This is the same as the metal pry tool i use, different brand printed on it
Pry Tool: s.click.aliexpress.com/e/y0dvtNW
A New Version of the pry tools
Basic Digital Microscope: s.click.aliexpress.com/e/beN6u068
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed
Orico 120w 10 Port Charging Station: s.click.aliexpress.com/e/miqk2Le
The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job
One page i go to when I'm curious what new repair tools is Wozniak Store: s.click.aliexpress.com/e/9eDP9uy
The Gold and Black Iphone 4s Screw Mats Im using 90% of the time
s.click.aliexpress.com/e/mg7GyLA - วิทยาศาสตร์และเทคโนโลยี
what screw size for this?
Not sure sorry , Phillips head but no idea on measurements
Mate, what happened between 5:40 and 5:45 ?? You have something new in hand. Im in the process of replacing my screen and Im stunned, stuck and in trouble now. Please comment.
Hi
I'm pretty at that point I'm using a pair of tweezers to lift off the charging board at the bottom of the phone to get full access to the LCD flex cable going through under it
@@rickstechrepairs after lifting the board. Looks like you are holding a midframe with the screen still attached and next second you are scrubbing the midframe with tooth brush. How did you separate those two? I think it's not shown on the video. I also noticed you were using hot plate surface set to 60 degrees. Can I continue without that? I really much apreciate your response mate! Good day!
Ah crap you are right I was watching after the time stamp linked
I would have peeled up the LCD flex connector and used a flat head screw driver to push the LCD out from the back, after which I use a smaller flat head screw driver to clean of any shards of glass left on the assembly
Heat is recommended, no needed but increases the risk of damage
Xiaomi redmi note 4 mediatek sama xiaomi redmi note 4x mediatek sama gk ?
Mediatek (Note 4)LCD is Different to Snapdragon (Note 4x) LCD