ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
1980 Camaro gets a rear end swap.
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- We picked up a new rear end for the Camaro a couple of weeks ago and get it installed. We also get some cosmetic things done as well. Check out the video to see what we find.
Follow us on Instagram at / landsharkgarage
#80camaro #chevycamaro #2ndgencamaro #camaro #chevyc10 #49chevy #chevycrewcab #squarebody #builtnotbought #driveyourshit #budgetbuild #smallblockchevy #diybuild #roadtrip
You can contact us at dlandmark68@gmail.com
I have an 80 Z28. Had 3 leaves on each side stock,1 was broke on the one side & 2 leaves broke on the other. I ordered the 5 leaf heavy duty when replaced them & was able to get rid of the air shocks since the springs gave the extra clearance which was nice. I have 295/50-15s on the back.
Glad that rearend worked for you. Cars coming along great.
Dude, you could just change the differential carrier, use the same ring gear thats already in the car. You won't have to remove the driveshaft and you won't have to bleed the brakes and it'll take half the time to do
This is awesome man I’ve got an 81 and I bought a 12 bolt and had no clue where to begin but you gave just the amount of help I needed
Good to hear thanks for watching good luck with the upgrade
this is funny i have a lot of the same cars just a little different i have a 68 pu with a stroke 454 and a 02xx trans 12 bolt possi, 79 chevy cheyenne short box 4x4 full option truck 400/400 turbo , 79 z28 rs t top stroke 454 have both setups for it 02xx trans and a t-10 4 speed with all the parts for both not finished yet , 70 ford high boy with 390 dana 60/80 lockers but have been building a 428 for it , 2002 s-10 with 4 cylinder turbo with 5 speed , my drag car 73 ss nova with a 396 tunnel ram , then my pride and joy a 67 rs ss 427 camaro . on the 79 i been painting the under side black with running gear the same color of the car will be with some chrome parts have u ever seen a 79 camaro with power trunk from factory it is the first for me plus it has power windows and locks light in trunk and under hood wiper delay tilt wheel rear window louver full spoiler kit tach in dash factory everything is on the option sheet got it from the original owner he said he got everything he could for it when he ordered it but it came with a 350 4 speed factory
I guess I’m not the only one. Im trying to put my 79 Z28 back together and it’s not as easy because I didn’t document well enough! Mine is completely to a bare shell. I need to put the rear end back in and this helped a lot. Im going through your videos, do you have anything about putting the front subframe back on and squaring it? That’s the part that scares me the most. Great taste in music BTW, I think we are close to the same age. I live in San Antonio TX and of course I pick the beginning of our horrible summer heat to start this 🙄🙄
We never messed with the subframe. sorry. Good luck with the project. They are worth it in the end. And thanks for watching !
Get the Fisher Body Manual for 1979. It will specify the alignment specs for subframe, body, and subframe+body. The Chevy Factory Assembly Manual will specify the torque for the bolts.
@@cojaro87
Thank you, I got the Fisher manual just need the assembly manual
What did the new rear come out of if you don’t mind,I have a 1980 trying to do the same
79 z28
Why didn't you film what did to paint the rear? It looked really nice afterwards in the video, did you use POR or Eastwood or something similar?
We used krypton rust tough semi flat black rattle can paint have used it for years. Very durable and easy to apply
@@toddlandmark6318
So just brush off the big chunks of rust and ready to paint?(of coarse degreased first)
We wirebrush usually. This rearend was super clean and had been pressure washed.
I have a 1978 Camaro it never even occurred to me when I bought it that it was only a one-wheel peel and who does a burnout on a test drive of somebody else's car?..lol. now I want to put posi rear end in but I know nothing about it and I don't have a garage. So unless I can find some help from knowledgeable people with a garage in my local area I think I'm going to have to pay someone what would be better to replace the whole rear end? Or just the differential inside the pumpkin housing? Anybody have any idea how much that would cost about?
You can put a posi carrier in with out swapping rearends. But with parts a decent shop is gonna charge you around1000 or more to do the work good luck. Thanks for watching!