From the Tech Desk: Tips about your Axial SCX6

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ส.ค. 2024

ความคิดเห็น • 27

  • @STP_RIDGELINE
    @STP_RIDGELINE 2 ปีที่แล้ว +2

    Awesome job and awesome vid thank you for the tip luv the scx6 hope to get one soon 🙏🏼👍👊💯❤

  • @GreenJeep1998
    @GreenJeep1998 2 ปีที่แล้ว +3

    In kept thinking those were 1300mAh packs on that truck, forgot how big it is!
    If I were to get one, I'd just hit the hardware store for a 10mm socket, or a dozen........because, you know, 10mm socket.............................

  • @roadrash76
    @roadrash76 ปีที่แล้ว

    I run two 5000Mah batteries in parallel every time for the last 10 months and I’ve never had any issues of any sort. No temp issues even in the AZ desert in the summer during the day. I also use the 100C rated packs.

  • @daysdesigns
    @daysdesigns 2 ปีที่แล้ว +6

    I look forward to the day that we can actually spend over a grand on a vehicle and not have to immediately start spending hundreds on it to make it road worthy! For crying out loud I swear every damn RTR is equipped with half the servo that should really be in it! I often wonder if these things are actually tested prior to selling to the public because it doesn't take a genius to see all the obvious things lacking with this platform. But I'll spare you the lengthy list as I'm quite sure you are aware.

  • @RobSchlegel
    @RobSchlegel 2 ปีที่แล้ว +2

    Why is the cool down time necessary?

  • @CONFUCIUS-f2x
    @CONFUCIUS-f2x 2 ปีที่แล้ว +3

    The approximate run time with just one battery? I understand it varies but a just an estimate. 10 minutes , 15 ????

    • @erikmeisen2876
      @erikmeisen2876 2 ปีที่แล้ว +2

      45-55 min on 5000 mha 3s gen lipo in low gear and some time in high gear

  • @Kolsch221
    @Kolsch221 10 หลายเดือนก่อน +1

    For the price Axial should give you something to take off the tires. That’s disappointing.

  • @rctd3260
    @rctd3260 2 ปีที่แล้ว +2

    10mm!!! Dang!!

    • @Rokstardad82
      @Rokstardad82 2 ปีที่แล้ว +1

      Only the most sought after socket in the garage

    • @pwrofgrayskull
      @pwrofgrayskull ปีที่แล้ว

      @@Rokstardad82 Always the one that disappears into the void…

  • @davidburger1936
    @davidburger1936 2 ปีที่แล้ว

    Is there a tip for putting the body on I seem to struggle a lot doing this?

    • @horizonhobbysupport
      @horizonhobbysupport  2 ปีที่แล้ว +1

      We would be glad to do a quick video on how to install the body with ease.

  • @cyrilb4340
    @cyrilb4340 2 ปีที่แล้ว

    It's possible run in 4s?

  • @CRAZCHEVBOY
    @CRAZCHEVBOY 2 ปีที่แล้ว +1

    can you run all 3 at once?

    • @VinnesRC
      @VinnesRC 2 ปีที่แล้ว +3

      If you run a parallel connection, yes

    • @horizonhobbysupport
      @horizonhobbysupport  2 ปีที่แล้ว +1

      You can. But we recommend you run them one at a time.

  • @billeyblackwell-kerslake603
    @billeyblackwell-kerslake603 2 ปีที่แล้ว

    Can you change to a deans connector

  • @ml-cf9re
    @ml-cf9re 2 ปีที่แล้ว +1

    I want American made rc tired of China

  • @whatsintheboxx
    @whatsintheboxx 2 ปีที่แล้ว

    Cool Video but useless for all European people because you don’t sell this rc here. We always have to wait longer than america 👎