How To Install Honeywell Home Wifi Smart Thermostat
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2023
- In this video we teach you how to install the Honeywell Home Wifi Smart Thermostat that allows you to remotely control your heating and cooling from your phone.
Honeywell Home Smart Thermostat: amzn.to/3B59e5Y
The Honeywell Home Wifi Smart Thermostat is a Wifi Smart Thermostat that allows you to remotely control your heating and cooling from your phone. It also works with Alexa and Google Home voice assistants so that you can remotely control your smart thermostat with your voice.
In my experience it takes 15-20 minutes to install you Honeywell Smart Thermostat. It's important to note that the Honeywell Home Wifi Smart Thermostat does require a Common wire or C wire for installation and you will need one in order to install the Honeywell Home Smart Thermostat.
The Honeywell Home Wifi Smart Thermostat (RTH9585WF) has a color touch screen display that you can use to adjust the temperature. You can also set schedules for the thermostat and get intelligent alerts about the status of your heating and cooling system.
How To Install Honeywell Home Wifi Smart Thermostat
1. Turn off the power to your HVAC system, and remove the existing thermostat.
2. Ideniify if you have a C wire or Common Wire for installation of your Honeywell Home Smart Thermostat. It is required for installation.
3. Install the Honeywell Thermostat.
4. Set up your Honeywell Thermostat.
5. Use the Honeywell Thermostat on the Honeywell Total Connect App to remotely control your Honeywell Home Wifi Smart Thermostat.
*Links included may be affiliate links which help support this channel. - แนวปฏิบัติและการใช้ชีวิต
Thanks for taking the time to make a comprehensive video. It was very helpful. Now, I will go check if I have a C wire.
Thank you! This video gave me to confidence to do it myself. I appreciate your time to do this.
Thank you! This video was amazing! I installed my thermostat successfully and it needed a lot of wiring which I did myself, thanks to you!
Thank you for this video... Flawless installation.
Thanks worked perfectly
Best video ever! It totally worked for me! So thankful!
Thanks for the video. I do not have a Base plate. How can I install it without a base plate?
I have an old Honeywell thermostat that has an S2 wire…google says it’s the indoor/outdoor temperature sensor. Where would that go on the thermostat?
Thank you
Will this work with a Honeywell whole house ventilation system?
Do you know how to convert a Lennox Icomfort thermostat to a Honeywell. the issue is the i+ and i-
I have a RTH9600wf were does the blue wire go the black is marked C
Another very informative video. Thanks for sharing.
I have the same old wiring setup, I am setting up mine and was wondering you have a r to rc red jumper. What do you do with the jumper on the new plate? The instruction say if you have a r and rc jumped to remove the jumper on the new plate, I see you didn't do that. Am I missing something? Thanks....
I need to know this also😢
It's fine to jump R(h) and Rc if:
(a) your heating and cooling are controlled by the same control panel (such as from the air handler on your A/C or furnace)
OR
(b) you have separate heating and cooling control panels (e.g., A/C + gas boiler), but you don't care that the thermostatic input power comes from only one of them (and, therefore, that turning off that system shuts off thermostatic control for both systems).
Odds are good that you're in condition (a), above.
If you're in condition (b), I'd suggest running a separate R for each and not jumping Rh-Rc. That way, as long as either system is powered, your thermostat is powered.
I'm not an HVAC tech, though.
Tnk u i love all except the little hole for the tstat wires. 5 min to inst and 45 min to wi fi settings. Nit good 4 business ok for home
I installed mine and it's working perfectly. My questions are: is the "Differential" setting the difference between what the actual room temp is compared to what the stat is reading or, an offset temp where it has to drop that differential setting before activating the furnace? Also, is there no backup battery if we lose power or does being connected to the net mean we we don't need it?
If you lose power in your home your heat/ac isn't going to work anyways so there's no need for backup power
@wbforsure2104 : The purpose of a back-up battery is to retain the settings and ensure that the system continues to operate as programmed when power is restored.
If you're watching this video, please take the time to level the backplate and attach it to the wall with the included anchors and two screws - it will ensure that the thermostat is secure and properly installed.
yeh, it makes sense to me
Is circulate feature for fan less running time than auto?
I have an extra green wire which was connected to the O/B terminal. Where do I connect that “extra wire” on the Honeywell thermostat? This unit is an old carrier located in Florida. (Is a heat pump system)
I had a message saying change the sensor, how and where do I change that
In my unit, it won't allow me to remove one of the wires. It seems to be stuck and I don't want to break this little flimsy plate. How can I release the wire?
Wow great video. I had to buy a Honeywell c wire adapter on Amazon I was told some Menards carry them too. I only had 4 wires coming out of living room wall. I cut and stripped all 4 wires to create less bulk as there is hardly any room for wire storage to get the cover plate snapped in. I still gotta hook up the adapter still, doesn’t look to bad
How can I find out the number of cooling/heating stages of my system??
Does this thermostat have an audible "clicking" sound when it turns on? Also, can the screen be turned off completely?
My thermostat is not powering on after installation. My previous brand new thermostat worked just fine.
Are you reading voltage between R and any other wire, especially C?
Do you need to turn off power to the furnace as well or just the air conditioner?
It depends on whether the furnace feeds power on the thermostatic cable. This would usually be indicated by a wire from a furnace control panel connecting to the "Rh" terminal on a thermostat. The best way to tell is to check the thermostatic cable for voltage before messing with it. If you read voltage or an NCV beeps, you haven't cut all the power to it.
If you don't have the C wire check that you have a blue wire in both locations. Had to connect my blue wire to the common on both devices. Powered up.
If you have a cyan wire, you have a C wire. The only question is whether or not it's connected to line common.
Where did it get the outdoor temp and humidity?
Probably the wifi
How do i repusrpose the G wire for C wire?
How do you?
Where is the video for this ? He said it would be in the description and it is not.
I dont have C wire. Why is that? It wont turn on
I turned the power at the breaker checked the cables and the power doesnt come on. How can i have blown a fuse if the power is off. We only have 1 red cable and with the old system there was a horseshoe connecting both c and rc. The instructions state to remove the jumper ONLY if i have 2 wires. I will have to call a tech. This sucks
You might have turned off the (2-pole) breaker for the compressor, but not the 1-pole breaker for the air handler, which is what energizes the 24V thermostatic cable.
If that system is energized and you touch R (red/ resource/ hot) to C (cyan/ common/ neutral), then you will short the circuit and blow the 3- or 5-amp blade fuse on the control panel, which is likely located on the air handler.
Those fuses are very cheap and easy to replace.
Hope this helps. Sorry that happened to you. That said, please be careful working with electrical systems if you're not familiar with them. They can kill you, and TH-cam videos aren't always as accurate or clear as they should be. (And in fairness, TH-cam commenters--myself possibly included--are often just dangerously over-confident amateurs.)
For some reasons the schedule icon desapear from the app.
I tried this and it didn’t work. I called a professional and he said that we popped a fuse because we allowed the RED wire to touch another one. Replaced the fuse and it worked. Lesson learned….don’t let the red wire touch another one.
That's why he said to turn the power off
@@gatordunn1982ge, we did that. Turned the breaker off for the AC unit and the room with the thermostat.
thank you for this comment because I just had that happen to me and didn't know why it wasnt turning on
Got it .. dont short circuit the wires thanks
Where was the fuse?
Mine won’t turn on 😢
How do you remove the wires from the thermostat????Help!
Push in on the little dimple on the wire connector and pull.
I installed mine but when I turned the switch the thermostat won’t turn on 😢
I just put one (Thermostat) in with a taco relay to run my hot water pump (only) now I Don't have to run down stairs to put the pump on manually when I but the heat on!!! I control both from my phone.
Lol
Never heard of a taco relay.
Is that a game😂
@@blueskies00 All you have to do is type taco switching relay and you will see what it is and what they do!!!
I have O for Orange wire and don't know where to put in? They have only one connection for W/O/B witch is very stupid.
Do you have heat from a heat pump? I.e., can your A/C system run in reverse to heat your home? (Similar questions: Is O connected on the air handler's control panel? Do you read ~24V between R and O? Can you see a reversing valve at the compressor?)
If yes, connect orange to O at the thermostat and set the default for heating or cooling depending on your climate. If no, leave it disconnected.
@@ncooty I contact the customer service and they told me to connect the Orange to O/W/B port and the white to W2/Aux/E port and this solved my problem. I may have a heat pump, but I don't think it's reversible, because in the winter the heating is only on gas. I don't know, are there pumps that are combined and work simultaneously on electricity and gas for better economy? So connected like this, the thermostat works perfectly for now.
@kirostar12 If the answer to any of my parenthetical questions above was "yes," then you likely have a heat pump that works as your primary heat source (which is extremely efficient). Unless your unit is wired strangely, O almost certainly operates the reversing valve on your A/C compressor: one way for heating (usually the default) and the other way (with O energized) for cooling. W2/Aux is used for a back-up heat source, such as a gas furnace, boiler, or heat strips.
Glad it's working for you. I'd vote you don't fix what ain't broke... at least until spring. :)
How do I know if I have a 1 stage or 2 stage furnace? No AC
Did not show how to set the time
These instructions are not very helpful if you’re trying to replace an old manual mercury thermostat with the new Honeywell thermostat. I wish some instructions would include that detail.
My thermostat doesn’t power up? Why is this?
Make sure your c wire is connected at your furnace. It make be disconnected if it was not used originally. I had that same problem.
Sometimes there is a fuse or breaker inside the furnace 3or5amp
The same to me. In my case, i have had an old analog thermostat. The blue wire is connected to the Y. On the Honey i connect the same with. But it doesn't work. Did indo wrong something?
I wonder if you can set a password on this device
I guess c is common i guess
Yes
@0:27: If you're going to advise novices on dealing with electrical systems, I think you really need to give more complete, specific directions. You mentioned turning off power to the A/C system as if it's a single breaker. Many systems have a 2-pole breaker for the compressor and a single-pole for the air handler, which controls voltage to the 24V themostatic cable. You'll see in the comments that some viewers switched off the compressor, but not the air handler, and then shorted the thermostatic line (R-C), blowing the blade fuse on the air handler's control panel.
For those folks, it probably would've helped if you'd shown that step, especially given how important it is.
He squeezed the casing off the red wire. If you look, it’s bare in one spot.
Yep downside of using pliers
Pos
It has really good reviews and works fine for me